Is it possible to assign viewports in paper space to a separate layer?
Explanation: I have a paper space with one singular viewport. On the same paper space I added three other viewports that I scaled in but only need for one thing. Can I assign these viewports to a layer and apply them when I need them or do I have to make a seperate paper space for each task.
I have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
Is it possible to use the viewport on one page to show the paper space of a different page?
View 1 Replies View RelatedI am currently working on a .DWG in Civil3D which has 12 viewports. This particular .DWG causes my computer to lag quite a bit. I was wondering if there was a way of combining viewports in paper space (i.e. taking areas from multiple viewports and displaying them in one viewport), or if I am stuck with the individual viewports? I am just looking to speed up the process, it takes a long time to load the .DWG and work within it, the problem happens to others as well.
.DWG info:
Large area with many smaller sites (retention ponds and such)
All sites must remain in the paper space layout
(I've tried deleting viewports, and that does speed up the process, but again, I need to keep all sites intact).
Computer info:
Windows 7 64-bit
8GB Ram
Intel Core i5-3450 CPU @ 3.10GHz
NVIDIA Quadro FX 1800
Asking.jpg
How to Set the Paper Space there create viewports in Different Angle ? (Find attachment file)
how is the Step ?
I am using autocad 2011..I have a problem with printing to scale.I have completed a drawing in model space with a 1:1 ratio, all my units are in mm.I have created 3 different view ports in paper space to show different aspects of my drawing, each view port has a different scale.
The whole drawing is to be printed on A2 size paper.
My main viewport (which contains the primary aspect of my drawing) is to be drawn to scale. When I click on this view port Autocad states that has a scale of 0.008583 – what does this mean? See picture 1..When I print the document the scale is set to 1 inches = 25.4.
All I want to do is print my drawing so that it fits onto an A2 page, but the main view port is to be printed to a scale. I want to scale to be sensible some like 1 in 200 or 1 in 50 etc so that other people can use a ruler to work out the real life dimension.
I have wall section sheets that are best viewed in portrait mode, but use the same landscape page setup as the other sheets in the set. So the viewports for the sections are rotated 90 degrees and difficult to read on the screen. Is it possible to rotate the paper space UCS and rotate the paper space "view" to match the UCS, like you can in model space?
I don't want to rotate the viewports and title blocks themselves & set up a portrait page setup. This is because I'm using Acrobat's PDF maker for batch plotting and not using the same page setup for each sheet makes one click, fire-and-forget publishing impossible. And I don't want to use DWG-to-PDF because it doesn't have any configurable image compression settings that I know of.
If it's not possible, then it's not the end of the world. We have AutoCAD Architecture and AutoCAD LT 2012 & 2013.
2 of 3 viewports in paper space do not show up in print preview, nor will they print. The viewports are all on the same layer, defpoint layer. Even if I create 3 new viewports and erase the old ones, still can only print preview one viewport and only one viewport will print.
View 6 Replies View Relatedhow to print two separate A2 drawings side-by-side in A1 paper space on an HP plotter? I'm assuming that this would be handled by a third party print management software or something along these line. I'm looking for any solution to save on paper!
View 1 Replies View RelatedThe model space orientation is different than the paper space orientation (I have my viewport rotated) but whenever I am working in paper space and double-click inside model space to activate the viewport, it resets/reorients the view to match the orientation in model space. It also changes the scale. If I lock the viewport and then double-click inside to activate model space it does not change.
I don't want to always have my viewports locked to work on them in paper space.
When printing a paper space viewport in Conceptual Visual Style mode, text objects are visible in the print preview but not in the printout on paper. Why are they not hidden in the preview if they are not going to be printed?
View 2 Replies View RelatedI am using Autocad LT 2012.
Recently I have problem to see my drawing in paper space although I have checked that all layers in paper space are on/thaw.
If there is a way to freeze a layer in one paper space tab and go to the next tab, same drawing, and unfreeze that layer and it not change the previous tab?
View 4 Replies View RelatedThis only happens from time to time. I have a sheet set up with multiple viewports. I double click in one viewport, type LAYER, and the layer dialog appears but my viewport has changed.
View 2 Replies View RelatedHow do you save a layer state on Paper Space???
View 1 Replies View RelatedI want to create finished paperspace-tabs, with a specific layer-configuration.
How can I manage that?Each tab has to be exported to PDF as a finished configuration, without changing layers in the end.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedI am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedI feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View RelatedI need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedI am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View RelatedI use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies View Related