My layer Control dropdown isn't working. It's showing only the current layer. If I select an object on another layer, it'll display that layer and the current layer only in the dropdown.I've tried using the PICKFIRST setting, but this makes no difference.
View 1 RepliesWhy does the layer control toolbar always state the Xref layers by default. Is there a workaround, or a setting so the layers of the current drawing are displayed by default?
View 2 Replies View Relatedis it possible to extend the dropdown box so i can view whole layer names?
layer toolbar.jpg
The layer control dropdown in the layer toolbar is just showing the state of the selected object or layer 0 if nothing is selected. Same for the ribbon combo. But it's working in the Quick properties dialog.
View 5 Replies View Relatedyou can match the layer filters with in the layer manager to the drop down on the ribbon..so how do i get the to match so the filter im viewing in the manager is what i see in the ribbon.
View 1 Replies View RelatedIs there a way in .net to add the layer description field (viewable in the Layer Properties Manager menu) to the layer dropdown list? Our designers want to see this information without opening the Layer Properties menu.
View 9 Replies View RelatedWhy the Layer Order in the dropdown isn't in alphabetical order (undocumented software feature perhaps....?)
View 2 Replies View RelatedI have been having problems using my layer toolbar dropdown menu. My drop down bar will show the current layer or the current layer and the layer of a selected object. I need to open the Layer Properties Manager in order to turn on/off or freeze/thaw other layers. It seems to happen the most when I have external references loaded into the drawing.
Also, the Layer Properties Manager has a few quirks. If I create a new layer, it will not record changes to the layer color, linetype, etc on the first try. I can make these changes, but when I close the Layer Properties box, all of the changes are lost. I need to reopen the Layer Properties Manager and make the changes again.
The Layer Properties Manager also seems to have a glitch where it will deselect from the manager back to the drawing without a mouse click. Also, when I click once on an external reference layer to select, it tells me I cannot modify this layer. I would assume this would pop up if it were a double click action for modification, but it does this after a single click.
It seems that there are some major glitches with the Layer Properties Manager.
I just upgraded to 2013 and have noticed that when using the dropdown layer control in the classic layer toolbar the mouse cursor changes from an arrow to the blue spinning circle to indicate its busy.
Why? and is there any way to fix this. You can still turn layers on and off and it reacts normally otherwise but it does make it harder to select the little lightbulb and freeze icons on the left.
Never happened in 2012 always happens in 2013.
In the properties and quick properties dialog box the drop down box that shows diffrient arrowhead types to choose from have disappeared, and is blank.
View 4 Replies View Relatedwhen I go to use the Layer Control on the Layer Properties it only lists the layer I'm working on. I then have to use the Layer Manager to change layers. why it would stop listing all the layers?
View 3 Replies View RelatedWhen I try and save (Control+S), nothing happens. I noticed none of my control keys do anything.
View 2 Replies View Relatedthere's nothing in that dropdown menu for you to select your source image/layer in the Move Path plugin.I am using an XCF (Gimp) file, with many layers. I selected a particular layer, then I opened the Move Path plugin.
View 2 Replies View RelatedWhile I was trying to do some editing, I've just lost the selections in the layer styles and photo effects drop-down windows while in full edit. I'm using PSE 7 and up until now has been working fine for as long as I've had it. What should I do to get them back or do I have to reload the entire program?
View 2 Replies View Relatedxref fade control not working?In model space I have xref'd a dwg (probably 2010 format) and it positions correct and displays in the normal default faded mode. No matter where I have the slider in display options, the xref fade does not change. Even changing the system variable through the command line is ineffective.
I'm running AutoCAD 2013 with Service Pack 1.1. installed.
here is the question,basicly, i have a folder named "A", and this folder include 5 DWGs, named 1,2,3,4,5. "1" is the main DWG, so, 2,3,4,5 is attached or overlayed to main file. First step im copying this folder from server, and im pasting to my desktop.Im doing some modifications on xref files, and im uploading "A" folder to my friend's partage from local company server. its allright till here..
my collegue is copying this same folder "A" and opening main file, and main file reading another "3" file from his desktop... this is the problem. file names are same, and it has to be this way. i want to make the main file read from its own folder. we are using 2008, 2012.
I'm working on Civil 3d 2012 and when it's set on Autocrad classic profile I can select my layers right in the drop down list by typing the first letter of the layer and it goes to it. But when my profile is set on Civil 3d, I can do the same in the layer drop down. Is there a way to set it like autocad classic?
View 1 Replies View Relatedwe have a drawing where we were un-able to use snaps (end, per, quad, etc.) on any blocks.
It seems like this particular drawing has issues not seen elsewhere.(besides the fact it was badly drawn) After some time playing with all the settings. We turned on the zero layer and then all the nodes were available as usual.
i've been using AutoCad for 20 years and never seen this. Is this some kind of new feature?Can you control the snaps with a layer? WHY?
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
Out of the blue, my Layer Control will not work. When I click on the icon, the top two lines on the screen go gray and the whole thing locks up. The layer palette does not appear. If I try to choose anything on the screen, it beeps. It unlocks if I hit escape. If I type in "layer" at the command line, the same thing happens. At this point, I am unable to change lineweights & colors within my layers settings.
View 2 Replies View RelatedWhen I click in my layer control and type in a "letter" to quickly scroll to that part of the alphabet, it changes my current layer to the first laser alphabetically with that certain letter. Is there a way to turn this off? If i am just looking at layers, I don't want autocad to change my current layer.
View 9 Replies View RelatedWhen dragging over a Modelspace View onto a newly created sheet in the SSM, is there a way to automatically designate it to a particular layer of choice, such as the G-Anno-Nplt layer? Just looking for a way to take an extra step out of this process.
View 1 Replies View RelatedHow to control existing layers (Freeze On/Off), in an existing viewports (5 of them in Paperspace) in AutoCad Existing drawing with VB.net? I just want to trigger On or Off, different layers in each different viewports.
View 2 Replies View RelatedMy ACad2006 Layer Combo Control bar appears to be locked. It will only show the current layer and will not show the layer of an object that is selected with the pickbox. I must have accidentally made a change somehow, but don't know how to undo this.
View 2 Replies View RelatedWhen I highlight any object in model space the layer control, color control or line type control does not change from the current layer status to the layer of the high lighted object if it is different. I am also not able through this layer control bar able to high light an object and use the fly out arrow to go into the layers and change this object to another desired layer for this object. I have never seen this function just not work before and can find no setting or preference that might not be turned on to make it function. why it is not functioning?
View 3 Replies View RelatedIf you have more than one PDF overlay, you might put them on separate layers. Generally speaking in this case, the PDF extents overlap so when i plot different sheets, I would want only a single PDF to be visible.
So, my first thought was to freeze the layers of unwanted PDFs in the viewport. Except, once i did that, nothing happened. So, i guess i have to manually freeze the layer when plotting each sheet? I then can't publish the layouts as the appropriate PDF's won't be visible.
How I can get my drop-down Layer Control to alphabetize layer names? The listing of layer names is appears random to me:
When I open the Layer Properties dialouge box the layer names are alphabetized by name, so that works, but it doesn't translate over to Layer Control.
C3D 2013
C3D 2010
I know you can set the view port type in your template for sheet setup controls...
BUT - I have a situation where we have profile xrefs of utilities, in those utility profile drawings we must <DR> in the utilities in plan view. I don't want those utilities to show in my PLAN VIEW view port... So now I simply VP freeze the profile layers in the plan view... simple and easy...
WISH - that I could set my view port types to PLAN and PROFILE, and have only PLAN layers show in PLAN and only PROFILE layers show in PROFILE.... AUTOMATICALLY....
Is there a way to control what layer a site is created on?
I am surprised I hadn't noticed until now that a site is actually an AECC_PARCEL In 2012 it comes in on the current layer. This causes some undesirable behavior. If your current layer is locked you are unable to create a site. If you later lock the layer the site is on you are prevented from changing site properties. I found it when I could not purge a layer because it contained the site.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
I have the Layer Filter Control as per the screenshot but can it be moved as per the arrow location using the CUI, and if so, how?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
Is there an easy way to switch from a viewport in paperspace to modelspace and have the same layer state show up? I typically run with my paperspace set up with the layers showing how they will print (show lightweights and display plot styles) but I would like to be able to switch to model space and only see the layers that are showing in a particular viewport, to minimize manual layer isolation.
I am using C3D 2011.
Civil 3D 2013, HF3.0
Windows 7, 64-bit, SP1
This only happens from time to time. I have a sheet set up with multiple viewports. I double click in one viewport, type LAYER, and the layer dialog appears but my viewport has changed.
View 2 Replies View Related