I am as-building some model space drawings. Client wants model space. I am trying to determine how to size the text and dimensions.
Ex: drawing 1/2" =1'-0", I scaled the drawing bdr up 24 times. What is the right sizing for text, dims. Arrows to get 1/8" text, etc? So far the arrow heads look to tiny.c
im not sure if this is a thing i can do with layer translator or not.
is it possible to link a preset text size to a layer? eg. when i click some text and put it on a specific layer i want it have a certain text size and not the rotation. so its sort of a match properties thing.
why doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
I just made an object, specifically, a rectangle with 6 units of height and 30 of long. Now I want to write text in the middle of the rectangle, I was able o find the middle point using osnap and a diagonal line (the point would be 3 units of height and 15 of long) but when I start writing text (with dtext) the text starts writing from that middle point to the right, If its a long text its not in the middle it starts in the middle :/ what can I do so the text will be exactly at the center?
View 5 Replies View RelatedJust upgraded to Autocad 2013 and I've noticed that if you click a dimension then right click the "dimension text position" is missing. Also double clicking it to get to properties, under text position I don't get the option to change to sat centred or above line. how to get it back. I've switched to classic view if this has any effect.Inventor 2013
View 8 Replies View RelatedI have not touched AutoCAD for quite some time and I just got back on it today.
For some reason, I cannot seem to be able to get the arrow at both end when I am drawing dimensions. Also, no text (unit) is shown is arrow either...
I loaded the template: Tutorial-mArch.dwt
Capture.jpg
PS: I am drawing a front fence for the front of the house I am about to renovate...
Trying to place this dimension text. Is there any circumstance that someone would want the leader to be the final result of this animation?
Of all the ways to generate a leader (when the correct one to the center of the dim can't be generated), the extremely acute angle version doesn't seem like the best option.
Check out the two pics I have added. I did this from Solidworks. Sometimes when dimensioning you have a series of holes that are close together like the ones shown below. What I would like to do is to drag the jog so that the dimension line does not run thru the other hole and the text stays where you put it. I would like to be able to do this without exploding it or going thru some sort of hoops to make it happens. Is this possible in Autocad? I thought that in a earlier version of Autocad you were able to do it but I am not sure.
View 2 Replies View Relatedim a mac user - whenever i go to do a linear dimension nothing shows up?
View 5 Replies View RelatedAt work we occasionally find the need to override a dimension with a text description. Is it possible to stack this text?
View 5 Replies View RelatedThis is not exactly a CAD issue but I use Inventor at times to create illustrations for math stuff. Is there a way to place a dimension like an arrow with x and y as text.
ASCCi art of what I want:
<---(1.2, 3.4)
Inventor Professional 2012 SP1 (25 seats with subscription)
Windows 7 64 bit
Lenovo D20, 12 GB RAM, Intel Xeon X5687 3.6 GHz, SSD
Quadro 4000, driver 8.17.12.9573, dual monitors
SpacePilot, driver version 6.15.3 Firmware 3.12
I'm trying to flip an arrow head dimension so that it appears within the two dimension lines pointing outwards. I understand that in previous versions of AutoCAD you could just right click -> flip arrow heads, but this version (AutoCAD Electrical 2014) seems to lack this feature...
View 9 Replies View RelatedAs you can see in this picture, I have made an iso arrow and then block it, but when I want to use it in the Dimension arrow (user arrow)the block is rotated.
View 3 Replies View RelatedWhen placing a dimension with the text outside of the extension lines, it defaults to placing the text either above right or below left of the arrows. If you try to grip/drag the text to another location (i.e. below right or above left) it won't allow it. I don't know if it is following some standard, but in the example shown, I had to explode the dimension to position the text in the preferred location.
View 3 Replies View RelatedIn AutoCAD 2013, when I try to select a dimension object for moving, erasing, &c, the text disappears. How to get it to stay displayed? Seems to just be when using AutoCAD 2013.
View 6 Replies View RelatedWhen I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
View 5 Replies View RelatedI have the fill color turned on in my dimension style to background. I want to adjust the "masking" box size. Just as you are able to in the text edit-background mask. I believe the default must be 1.25 larger than the text. I would like it to be 1.00. Is this possible? You can adjust the text background mask size, but not the dimension mask size.
View 8 Replies View RelatedI have to collect all the Dimension arrowheads(usually close filled type) present in the modelspace ,and change the type to DOT.. Im using COM APi.
View 1 Replies View RelatedI have 2 dimension styles, but for one, I can't change the arrowhead
In the attachment, there are 2 dimensions, one of each style. The left one works good, the right one doesn't reflect any changes to arrows (type, size).
I'm drawing a setting-out plan for landscape construction purposes and need the dimensions to have an arrow in the middle of the dimension line to indicate to the contractor the route to follow around site.
View 7 Replies View Relatedhow to edit the line space distance for the dimension text. I can change the style, size and several other features. But the line space distance is the one thing I can't seem to edit. The only solution I know of and use is exploding the dimension and then the text turns to mtext and the option becomes available. But then if the section changes to a shorter/longer area, i have to go through several steps with the exploded lines. how to edit the line space distance for the annotation in the dimensions. i have also attached a pic of my issue as well.
C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit
I need to start doing shaped glass drawings for our new glass supplier who insists everything is viewed from outside. Unfortunately all our drawings are viewed from inside and I don't want my team to be responsible for copying and flipping glass details in case they forget to flip one day.
I can obviously mirror the viewport view by clicking View/Views/Bottom but this is also mirroring any text dimensions, even though my Mirrtext preference is set to 0.
Is there a way to set a dimension style where the text is automatically back to front so it will then appear the right way round in that particular viewport. How to get round this problem without duplicating parts that can then get missed at a later date and not amended?
This needs to work in both AutoCAD 2014 and AutoCAD LT 2014 as we run a mixture in our office.
i am opening file in autocad 2013, my all dimension tags and text and point are merged with my other drawing objects how can i separate.
View 1 Replies View RelatedI have recently started using Architect 2012. We use Architectural Tick for dimensioning.
The problem is the Architectural Tick arrow is not coming in at the proper scale (Arrow head size = 3/32", dimscale varies). The arrow head seems to be out by a scale factor of 25.4 (found by trial and error).
If so is there a software patch or workaround. Can the Architectural Tick block be edited and if so where is it?
(using Windows 7 - 64bit)
i have created a door schedule and it seems to be missing the most important part, the sizes! When I go into Style Manager and click on the door shcedule and try to add columns size does NOT come up as a choice. I have added size to the property sets of the doors.
View 4 Replies View RelatedI'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies View RelatedCan i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View Relatedevery one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies View RelatedWhen doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies View RelatedIs there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View Relatedmy normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
