AutoCAD Inventor :: Geometry From Part Sticking 20 Or 30 Feet Out Into Space?
Oct 17, 2011
Having problems with parts of their model not showing up after going through the AEC exchange to the adsk file then open it up in Revit architecture? Or some wild geometry from a part sticking out 20 or 30 feet out into space? It seems that if you create a part one way it doesn't do well in the conversion process while creating the same part another way or a different sequence it's ok with it. (using Inventor 2011 and viewing in Revit 2012)
View 2 Replies
ADVERTISEMENT
May 11, 2013
Using acad 10 I just start using annotative styles now, so far in order to detail a part I use to actually copy the geometry, change styles and scale and start detailing.
The problem is that often when Im detailing and annotating a part I need it to be clipped.
Is there any way to tell autocad that in scale 1:25 I don’t want to see all the structure but only a specific area of it(clipped inside a rectangle)
View 5 Replies
View Related
Jan 2, 2012
I am trying to export geometry found in a flat pattern sketch overlaid onto the flat pattern.
Since I am creating the output file manually I gather the flat pattern boundaries and bend center lines for output to a file.
When I add flat pattern sketch entities to the mix they do not overlay properly. What matrix would I have to push the sketch entities through to get them to the same coordinates as the flat pattern?
View 1 Replies
View Related
Sep 9, 2012
I have an assembly with a few parts inside and want to create a new part(hose) in the assembly and link some faces from other parts within the assembly to my new part to show the routing of the hose.
Can I link faces within an assembly to one of the assembly components.
View 2 Replies
View Related
Jan 11, 2013
I need to downscale whole assembly if its possible. If not, its no problem for me to downscale every single part separately (apx. 30pcs) and then put it together again but I need to downscale it with all its modeling history - sketches, planes and other geometry. I can't select them when using DERIVE function.
View 9 Replies
View Related
Mar 19, 2012
I want to create a structure using the attached part geometry, what would be the best way to make the crosses coincident with the two long columns? (just like the 2 at the top but without having to manually trim each line, if it could be constrained to variable parameters even better)
The structure has the same geometry on all four sides so i intend to circular patern the frame generator components around the Z axis, any better workflows?
View 5 Replies
View Related
Dec 6, 2013
In our drawing file we expose the mass of the part. So I have set the 'Update physical properties on save' in the 'Application Options'. This works fine when you save your file before switching to the drawing file. If you forget to save and go to the drawing file the mass is showed as: N/A.
Therefore I have created a rule which updates the mass of the part. This rule is activated with the 'Part Geometry Change' event trigger. This is done to update the mass in the drawing file even when the partfile is not saved. This works fine. If I make any changes to the model the mass is updated correct, EXCEPT for deleting features. When I delete a feature and switch to the drawing file the mass is shown as N/A again. So apparently deletion of any feature is not recognized as a 'Part Geometry Change' because the rule isn't triggered.
View 7 Replies
View Related
Sep 20, 2011
Is there a way to make AutoCAD2012 display the area of a closed Polyline as Feet- Inch(ex 22'-4") rather than the feet as a decimal (ex feet=22.3333333) as it does when the units are set to Architectural or Engineering?
View 1 Replies
View Related
Feb 25, 2013
I have a drawing set up to be Survey Feet and everytime i export it to autocad using the export tool it converts it to international feet.
Civil 3D 2012 all sp's
View 3 Replies
View Related
Jan 1, 2014
I am trying to see my model space in paper space but nothing is there. tried creating viewports, but they are blank, tried to try different scales, still no joy? tried different layers etc, all layers are on!
This is only happening last couple days but is same for all my drawings. I must have changed a setting or got something very wrong?
how to get my paperspace back!
View 9 Replies
View Related
Apr 17, 2012
I am trying to program the view placement of various parts and have run into a situation where I need to place flat patterns. On the programming side there isn't an issue, but the issue occurs when attempting to select the wanted view orientattion.
Attached you will find 2 screen shots. One of them is from the "Folded Model" (Take note of the View Cube)
The other is from only Pressing the "Go to Flat Pattern" Button and being in "Flat Pattern" viewing mode (Note the Cube)
I need the Flat Pattern View to correspond with the Orientation of the Folded Model.
View 2 Replies
View Related
May 10, 2013
Is it possible to have model space geometry print through a watermark in the layout? My watermark consists of mtext with an arial font placed manually in the layout. It is on it's own layer which is set to print at Shade 40 (plot style tables). Draworder works with other layout objects but not the geometry from the model space viewport. My watermark covers the model space geometry so it is not visible when printed. Is this possible?
View 1 Replies
View Related
Jun 25, 2012
The geometry when try, to center in 3-D world space, does not. Shown are a few problems that I see with 3-D studio Max 2013, and I am not a professional. Any way to contact Autodesk in order to show these problems, but I'm showing in the pic.
View 6 Replies
View Related
Sep 27, 2012
I just missing something or is there no way to get frame generator parts to list their lengths in feet?
I have authored some structurial parts and everything was done in feet, when I insert them directly from the Content Center, everything work like I want it to, but when I use frame generator they lengths are always in inches.
I know I can change it in the BOM but I'm trying to make it more consistant for everybody.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
View 2 Replies
View Related
Feb 19, 2008
I can't find the option that changes the scale from 1/100 to 1/16" to 1'-0" or how to have the scale show up on a drawing. I've gone into options and turned on the scale visibility but get squat on both.
Also where can I find a list of the title block text options ie. ,
View 6 Replies
View Related
Jun 14, 2013
Is there a way to get the dual unit option to read in both feet and inches....for instance 32.75 to read 2'-8 3/4" instead of 2.729 ft?
View 3 Replies
View Related
Nov 15, 2011
I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
View 7 Replies
View Related
Mar 28, 2012
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies
View Related
Dec 28, 2012
The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies
View Related
Apr 1, 2013
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
View 5 Replies
View Related
Dec 11, 2013
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
View 6 Replies
View Related
Nov 15, 2013
New user 2014
Part created in assembly does not update to part file.
View 9 Replies
View Related
Mar 29, 2012
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
View 7 Replies
View Related
Jul 1, 2013
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies
View Related
May 4, 2012
convert the part that I have drawn to sheet metal. I have tried to make the part from sheet metal and it did not work out at all. I have attached both versions of the part.
View 1 Replies
View Related
Feb 14, 2012
As soon as I open a piece or try to make a new piece, it crashes! I can open the program but can't use it! I installed it and activated it and I can't use the program at all. I have sent many error reports beacuse I have opened it many times and had it crash many times and have always given my email address. Attached is the Error Report Details screen shot.
View 3 Replies
View Related
Aug 29, 2012
In previous releases (2009 i think) when i converted a standard part to a sheet metal part i could recall all the sheet metal styles by linking back to the sheet metal template (i can't remember exactly how this was done, but it was possible with one operation)
In 2011 i canot find a quick way of doing this, it looks like i have to open the sheet metal template and export each different style (about 40 of them) and then import each one into the converted part. am i missing something? is there a simpler way similar to how it used to be done? Why have Autodesk made this more difficult?
As it stands at the moment it would be quicker for me to remodel the parts from scratch using the sheet metal template. I know this is the obvious solution, but seems strange to change something that worked well to something that doesn't!
View 6 Replies
View Related
Oct 23, 2013
I order not to hide components, i want to make a break sketch and remove a piece from a part from an assembly in the isometric view in a drawing. can i do that?
View 4 Replies
View Related
Apr 3, 2013
I have a structrual rectangular tube as shown in the picture below. I need to fold the four flanges inward to create a sort of point or pyramid.
View 9 Replies
View Related
Sep 11, 2013
The simple question is… how can we insert a step (stp) part into an existing part file?
The story behind the question is this:
Normally when we get a step file assembly from a customer, if the part has changed, we put our part into Old Versions and save their new step file as our ipt number and replace it in our assembly file. With Vault, in order for us to maintain the history of the part files, we need to keep the original file so we can’t just delete it or replace it, so now we need to figure out how to get a step file into an ipt. The Import command on the Manage tab (with 2013 at least?) does not allow import of stp files just yet.
The only other option I can think of is to put the original part into an assembly with the step file, create a copy of the step information in the part file and use it to recreate the new (step based) part.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 1 Replies
View Related
Mar 11, 2013
I'm modeling a temperature gauge and would like to have glass over the gauge so the inside is visible. I can easily do this with an assembly, but I'm wanting to do this with a single part. I tried to derive a new part from the assembly, but the transparent part turns solid so nothing inside is visible. Is it possible to do this?
I've include pictures of what I want and what I end up with.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 9 Replies
View Related
