The geometry when try, to center in 3-D world space, does not. Shown are a few problems that I see with 3-D studio Max 2013, and I am not a professional. Any way to contact Autodesk in order to show these problems, but I'm showing in the pic.
View 6 RepliesJust wondering what the best way is to set-up my units and scale preferences in 3dsmax. I would like to have my units in mm or cm so that when I import an object with known and precise measurements, it will stay consistent in 3ds max. So that I can visualize the objects in the correct scale and make measurements with the right numbers.
Of course I dont want to mess with results ofmy textures, animation, camera and anything else in 3ds max and would want to have everything behave normally if my units were in cm or mm in stead of the default.
Win7 Pro 64bit
I7 3680 6 core 12MB cache w Corsair H80 liquid cooling
ASUS P9X79
32 GB DDR3
NVidia Quadro 5000
3TB WD
How would I find the translation of an object in world space? according to the documentation, translate is not -queryable... once I freeze transformation of a sphere theres no way for me to find its world space, but it still Has a world space because its at a location in the scene.
View 1 Replies View RelatedI am trying to export geometry found in a flat pattern sketch overlaid onto the flat pattern.
Since I am creating the output file manually I gather the flat pattern boundaries and bend center lines for output to a file.
When I add flat pattern sketch entities to the mix they do not overlay properly. What matrix would I have to push the sketch entities through to get them to the same coordinates as the flat pattern?
I am trying to see my model space in paper space but nothing is there. tried creating viewports, but they are blank, tried to try different scales, still no joy? tried different layers etc, all layers are on!
This is only happening last couple days but is same for all my drawings. I must have changed a setting or got something very wrong?
how to get my paperspace back!
Having problems with parts of their model not showing up after going through the AEC exchange to the adsk file then open it up in Revit architecture? Or some wild geometry from a part sticking out 20 or 30 feet out into space? It seems that if you create a part one way it doesn't do well in the conversion process while creating the same part another way or a different sequence it's ok with it. (using Inventor 2011 and viewing in Revit 2012)
View 2 Replies View RelatedUsing acad 10 I just start using annotative styles now, so far in order to detail a part I use to actually copy the geometry, change styles and scale and start detailing.
The problem is that often when Im detailing and annotating a part I need it to be clipped.
Is there any way to tell autocad that in scale 1:25 I don’t want to see all the structure but only a specific area of it(clipped inside a rectangle)
Is it possible to have model space geometry print through a watermark in the layout? My watermark consists of mtext with an arial font placed manually in the layout. It is on it's own layer which is set to print at Shade 40 (plot style tables). Draworder works with other layout objects but not the geometry from the model space viewport. My watermark covers the model space geometry so it is not visible when printed. Is this possible?
View 1 Replies View RelatedInside 3D Studio max, its possible to adjust the pivot center of an object to anywhere in space. So if for example, I've got a sphere in my scene and I want to have a bunch of cones spin around the center of the sphere (to create the basic shape of a sun graphic) I can just change the cone's pivot to be in the exact center of the sphere and then when I rotate and copy the cone, they will all be perfectly centered around the sphere.
Tying to do this in Photoshop however is proving rather difficult. Since the triangle representing the sun's rays is smaller than the circle representing the sun, I can't move the traingle's pivot to match the center of the sun because the bounding box for the transform isnt big enough.
If I duplicate the sun and merge the triangle and the sun together, the merge action re-adjusts the pivot to be in the center of both objects so its no longer in the correct center of the circle. I can however move the pivot point to the approximate location now because the bounding box is larger, but I don't need the approximate location, I need the exact location.
Is there a way to move the pivot to a specific coordinate? Or am I going to have to move everything onto a perfectly square canvas and snap everything to grid lines?
I do a lot of CD designs, and often I have my text centered on the front covers. When I put the text centered, however, PSP is added an extra space to the end of text, so when I center it on the canvas the text is actually off-center to the left. When I go into edit the text, there is no space on the right of the words to delete.
With the text selected this is how it looks: The right edge of the frame should be flush with the right edge of the last 'T'.
how to resize the world map into the orb perfectly.
It does not explain this on the tutorial on step 3,
I am using CS2
I have read somewhere using PSCS2 that you can go into shapes and retrieve a picture of map of the earth. I know the keys you have to press on the keyboard are 3 seperate keys to get this image from the shapes as it is not shown in the menu's for some reason.
So does anyone know the keys to get the world map?
This might be asking for a bit too much. But how would I make a 3d pixelated world like in the template below.
View 3 Replies View RelatedI need a world map in an acad file
View 2 Replies View RelatedQuestion - What is the difference between the world UCS and the top UCS?
I am working in a fairly large model and when I have the UCS set to world and do the ID command I get the correct coordinance. However when I am in a plan view and UCS is set to top the co ordinance come in roughly 600 feet different. How to set the UCS so that co ordinance will be the same no matter what UCS is being used? Or explain why this would be?
I have a file that is behaving very oddly. Its a detail that I cannot pick some lines on in world UCS, but in Isometric views will pick ok, and to make matters worse, when I do a regen the lines in question vanish.
File attached, refer to AS DRAWN MKGP2, top left of drg sheet 324125_JJ_005_A.dwg
I am creating a game and I need to insert a map of the countries of the world in it , I am trying to model a map in 3ds max but I can't find a tutorial to show me how. how to model a map.
View 2 Replies View RelatedI am trying to insert Geo-referenced TIF files into Map 2013 but the associated World files are not being found/recognised even though they are in the same directory as the image. I have tried both TAB and TFW using MAPIINSERTand Data Connect.
Going back to Map 2012, which we still have in the office, the World files are found and correlated correctly with both of the above World file types and Map commands.
I can do what I need to do in 2012 for the moment
I have 4 plans of the a building in separate files, all set to world ucs. I xref in ground floor to the first floor, then move the first floorr so it aligns. I complete the same process for plant room and roof. Having saved all the files I then xref back the first floor into the ground floor using the insertion point as 0,0,0 but the plans do not align???!!! I do the same for the other plans, the plant room plan aligns with ground floor whilst the roof plan aligns with fist floor [but not ground].
I have tried reinserting numerous times but am missing something? The files were supplied to us as dwg format but I do not know the full history.
I am using map 3d and I would like to merge/attach aerial photo map into an Autocad basemap. I was told that there is a featurein Map 3d that can merge aerial together.
View 1 Replies View RelatedAny outline world maps that are actually editable in DP7? I found some but several countries could not be filled with colour.
View 6 Replies View RelatedDefinition about world and local axis,What is different between both.
View 1 Replies View RelatedI'm trying to add an aimConstraint between objects that are placed under different transforms, but the problem is, it seems aimConstraints calculate the direction using the target and pointing objects local coordinates, is there someway to make it calculate them using world coordinates instead?
View 1 Replies View RelatedI want to move our firm to using a UCS that aligns with the viewport.
However my hesitation has always been that World does not seem to restore to the original coordinates.
We do survey drafting and the map grid coordinates are critical and we drop in new survey data over the existing on a regular basis.
I tested it again last week but still I cannot insert new data into the same position even after restoring to World UCS. It is consistently about 1.5 units offset from the correct position.
Am I doing something wrong? Should USC World set it back the identical original coordinates such that I could confidently paste with a 0,0 base point and have geometry by in the correct position.
I mainly use MyPaint, Gimp and Inkscape, but I also made a quick tour ofother painting softwares. If all of them take into account the color (asis, without any characteristic like viscosity, nature of a paint - oily oraqueous) and the toools to apply the color (with a stiking inventivenessregarding the brushes !), I have not found any that directly simulate thebehavior of the media on which the color is applied. However, to take justthe example of the watercolor, the paper has a fundamental importance onthe effects that can be applied and on the final rendering.
Of course, with a good expertise - and dexterity - in a particularsoftware, one can, by manipulating the image, achieve a very close if notidentical result. But this is akin to a Grand Chef cooking, with secretrecipes, tricks and tips, subtle dosages...
why the medias are not implemented in the paintingsoftwares ? There is some few basic parameters as the substrate porosity,surface roughness, anisotropy of the porosity and/or roughness, inclinationof the surface of work, and if this is coupled to some parameters of theink, like viscosity, attractive or repulsive power of the ink, you can workreally more intuitively.
I'm sure this is mind-numbingly obvious and I am overlooking it, but when I go to use the rotate tool, the center point of the rotation is defaulting to the center of the artboard, not the selected group of objects. How do I change that to default to rotating on the selection center by default?
PS. This is Illustrator CC (17.0.2) on a Mac running 10.9, if that is relevant.
I'm having some fits with the constrained orbit center. It seems to me that It used to always be in the center of the screen when I would use Shift and CMB. Now it seems to be stuck on the center of my assembly/part. I know that I can hit F4 and long select LMB to re-center but I have never had to do that before the last day or two. I have uninstalled all the Beta Add ins I had installed and I have even uninstalled and reinstalled Inventor Pro 2014.
Is there an option somewhere that puts the default Orbit Center to the center of the screen?
I have been sent a very large number of files for which the world file is jpgw not jpw. Is there any way to get AutoDesk to recognize this? I know that I can get it to work by renaming the world file to jpw, but I have hundreds of files so really don't ant to go down that route.
View 5 Replies View RelatedI am trying to insert a tif that has a world file. I have AutoCAD Civil 3D 2013. I changed my workplace to Planning and Analysis. I clicked on the Image ican. I found the tif file I wanted (the tfw is in the same directory), I clicked open. It does not give me the option to select the tfw from the correlation source dropdown.
View 8 Replies View RelatedWhen I am in the World _plan view everything appears fine. When I use _plan to orient the view to a custom UCS the labels disappear.I'm using a Dell
Precision T3600 with 8 Gig RAM dual 2.8GHZ processor
Windows 7. Autocad Map 3D 2013 64-bit
NVIDIA Quadro 600 graphics card.
In my drawing I have set my UCS to a gridline (I'm drawing up a survey from a construction site), named the ucs 'square' and then set Plan view to Current so that it is nice and square to the screen. I saved the drawing in this plan view.
However, when I reloaded the drawing this morning, my 'square' plan view has become 'World'. Also my 'square' UCS has disappeared from the list of UCS's. I thought this was just a funny bug so I typed 'UCS' followed by 'w' hoping the world UCS would go back to the real one, but nothing happened. As far as I know it is not possible in ACAD to rename, alter or in fact do anything to World UCS (for good reason), but this is what ACAD appears to have done all by itself.
Luckily I have all the site gids saved in their 'world' orientations so I can get round it by a simple bit of copybase/paste/rotate, (but it means my dimension text is all going to be skewiff).
As a caveat I should add that I am a very exprienced ACAD user (7years) and regularly work in 3D in all kinds of views and UCS's and I've never had this happen before.