I have been sent a very large number of files for which the world file is jpgw not jpw. Is there any way to get AutoDesk to recognize this? I know that I can get it to work by renaming the world file to jpw, but I have hundreds of files so really don't ant to go down that route.
View 5 RepliesI shoot raw + JPG and wish that LR 5 had an option not to import JPG when there is a same-named raw file. Lacking that, are there suggestions perhaps for Windows utilities that would do the following (I am on Win7 64-bit with LR 5.2):
I delete all the JPG images before proceeding. That's easy enough; in Windows Explorer, one can sort by type, then delete all the JPGs, or one could open up a command prompt in the directory and "erase *.jpg". But there's a complication; in some modes of the camera, no raw file is generated. In those cases, I just have one .jpg that I want to keep. Here is an example:
img1.cr2
img1.jpg
img2.cr2
img2.jpg
img3.jpg
img4.cr2
img4.jpg
I want to process this directory and end up with one file of each filename, as follows, before doing my import:
img1.cr2
img2.cr2
img3.jpg
img4.cr2
The pseudocode would go something like this:
Sort files by filename fname
IF fname.jpg and fname.cr2 both exist THEN delete fname.jpg
How can I easily do this?
I am having massive issues with my brand new version of VideoStudio Pro x4 crashing when I try do to the following : import jpgs, create a video file, upload a file to youtube (it will create the mp4 file but says cannot create the waveform). I am running this on Windows Vista Sony Vaio All in one with a 2.5 ghz processor. I am trying to create a 6 screen split screen video. It also seems to be degrading my vid quality. I tried to submit a case to your support team and both times it says case failed.
The errors I am getting is "unspecified error, send dump file to Corel for analysis."
Then it shuts down.
I am planning to wipe and reload this puter and set it up for Windows 7 , I know I have one issue with uploading ( I have something in the background that is choking my upload speed. yes we have run everything to figure out what it is, when I run it in safe mode I don't have the problem."
The all in one does not have a graphics card but that should not be causing issues with importing jpgs.
I am trying to insert a tif that has a world file. I have AutoCAD Civil 3D 2013. I changed my workplace to Planning and Analysis. I clicked on the Image ican. I found the tif file I wanted (the tfw is in the same directory), I clicked open. It does not give me the option to select the tfw from the correlation source dropdown.
View 8 Replies View RelatedHow would I insert a *.tiff image with a world file that is *.tfwx into MAP 2014?
MAP appears to ignore it.
working in Cad 2012, and used to 'bind' images to the file, but can't find that function. Doing standard details and need to include the images in the file for access on a global drive, so it has to be a self-contained file.
View 6 Replies View RelatedI have a world map(.gif file) which has yellow circles on top of it. I need to erase all the them from the map. How can I do it using GIMP? Is there anyway I can get my original picture back?
View 3 Replies View RelatedWHY am I (suddenly) receiving 'bad file' messages when I try to upload jpgs that were created in PS? When I did a test and tried to upload PS jpgs that had been uploaded successfully before, the bad file msg popped up again. I also tried re-creating the PS file from scratch multiple times, made sure to save it under 'standard' format, tried making a new file and just placing the saved jpg (which will save ok to my computer) and then re-saved as a new jpg, but still the error message.
View 9 Replies View RelatedI am having problem convertin this SLDPRT file to inventor.
I am currently using 2012. I tried importing the file but nothing shows up when I import it. All I get is this translation report with error.
translate this SLDPRT file to .ipt file?
I need a world map in an acad file
View 2 Replies View RelatedQuestion - What is the difference between the world UCS and the top UCS?
I am working in a fairly large model and when I have the UCS set to world and do the ID command I get the correct coordinance. However when I am in a plan view and UCS is set to top the co ordinance come in roughly 600 feet different. How to set the UCS so that co ordinance will be the same no matter what UCS is being used? Or explain why this would be?
I have a file that is behaving very oddly. Its a detail that I cannot pick some lines on in world UCS, but in Isometric views will pick ok, and to make matters worse, when I do a regen the lines in question vanish.
File attached, refer to AS DRAWN MKGP2, top left of drg sheet 324125_JJ_005_A.dwg
I am trying to insert Geo-referenced TIF files into Map 2013 but the associated World files are not being found/recognised even though they are in the same directory as the image. I have tried both TAB and TFW using MAPIINSERTand Data Connect.
Going back to Map 2012, which we still have in the office, the World files are found and correlated correctly with both of the above World file types and Map commands.
I can do what I need to do in 2012 for the moment
I have 4 plans of the a building in separate files, all set to world ucs. I xref in ground floor to the first floor, then move the first floorr so it aligns. I complete the same process for plant room and roof. Having saved all the files I then xref back the first floor into the ground floor using the insertion point as 0,0,0 but the plans do not align???!!! I do the same for the other plans, the plant room plan aligns with ground floor whilst the roof plan aligns with fist floor [but not ground].
I have tried reinserting numerous times but am missing something? The files were supplied to us as dwg format but I do not know the full history.
I am using map 3d and I would like to merge/attach aerial photo map into an Autocad basemap. I was told that there is a featurein Map 3d that can merge aerial together.
View 1 Replies View RelatedI want to move our firm to using a UCS that aligns with the viewport.
However my hesitation has always been that World does not seem to restore to the original coordinates.
We do survey drafting and the map grid coordinates are critical and we drop in new survey data over the existing on a regular basis.
I tested it again last week but still I cannot insert new data into the same position even after restoring to World UCS. It is consistently about 1.5 units offset from the correct position.
Am I doing something wrong? Should USC World set it back the identical original coordinates such that I could confidently paste with a 0,0 base point and have geometry by in the correct position.
So, I'm trying to create a repeat pattern of a Balloon illustration I've done in Adobe Illustrator. I've got the singular file (balloon.ai), which weighs in at around 700MB.
Now I'm trying to create the repeat of this pattern on a separate Artboard which will repeat these balloons, 30 balloons per repeat square to be precise.
What would be the best way to import these separate balloons into the repeat square once (as they're the same file) without affecting the weight of the file and performance of Illustrator?
So, in essence, is there a way to import that balloon.ai file and only have it use up 700MB on the page rather than 30x700MB by the time I've placed 30 balloons?
I can't rasterize the files as the printer needs the raw file.
How to open a .tin? I tried to create a surface from a TIN as one way but it is looking for .pnt. as well.
View 8 Replies View RelatedI am trying to open a lighting fixture file in CAD. The file is a IES extension. How do I open this?Is Lexicon the proper program to use?
View 1 Replies View RelatedI am trying to import a CSV file in AutoCAD 2014 but cannot find proper function. Is there any automatic function that will do it for me or I have to create some kind of tool to accomplish that task?
View 6 Replies View RelatedIs there a simple way to import a polygon from a csv file? I have read about ascpoint.lsp, but as far as I could work out, this makes a polyline, not a polygon. A simplified example is that I want to draw a rectangle with points 0,0 and 10,5 (note there is no z-axis, i.e. it's all just 2D). How can I create this from a csv file? I am flexible as to the format of the csv, but for example it could be 0 0 10 5.
Without trying to overcomplicate things, it would also be useful if the colour could be defined in the same csv file (e.g. using a 5th column, or a second row) and that the polygons were automatically filled solid (as you could do by using the BHATCH command).
The main reason I ask is that I have some cel files containing polygons and lines, but I cannot import them into autoCAD directly (changing the extension to DGN and inserting it fails) possibly due to a weird/obsolete format, however, I can convert the cel file to a csv file and strip out the nonsense.
I'm trying to import a circle from a GML file into Autocad Map 2010 and it doesn't seem to work. Is the "gml:Circle" element supported in this version ?
View 2 Replies View RelatedI was furnished with a .shp file (and a number of associated files (5 total I think) that I can't remember-not in office now). The file is supposed to be a pipeline alignment in Pennsylvania South NAD83, the data imports the polyline with correct dimensions but the coordinates end up being about N-14,613,757 E-1,984,420 and should be about N-334,435 E-1,413,375.
As an aside, we are using Carlson Civil Suite in MAP. My intuition is telling me the problem has to do with setting up the initial geographic system in a new drawing. I am going to try the import with plain MAP.
When I am in the World _plan view everything appears fine. When I use _plan to orient the view to a custom UCS the labels disappear.I'm using a Dell
Precision T3600 with 8 Gig RAM dual 2.8GHZ processor
Windows 7. Autocad Map 3D 2013 64-bit
NVIDIA Quadro 600 graphics card.
In my drawing I have set my UCS to a gridline (I'm drawing up a survey from a construction site), named the ucs 'square' and then set Plan view to Current so that it is nice and square to the screen. I saved the drawing in this plan view.
However, when I reloaded the drawing this morning, my 'square' plan view has become 'World'. Also my 'square' UCS has disappeared from the list of UCS's. I thought this was just a funny bug so I typed 'UCS' followed by 'w' hoping the world UCS would go back to the real one, but nothing happened. As far as I know it is not possible in ACAD to rename, alter or in fact do anything to World UCS (for good reason), but this is what ACAD appears to have done all by itself.
Luckily I have all the site gids saved in their 'world' orientations so I can get round it by a simple bit of copybase/paste/rotate, (but it means my dimension text is all going to be skewiff).
As a caveat I should add that I am a very exprienced ACAD user (7years) and regularly work in 3D in all kinds of views and UCS's and I've never had this happen before.
I have a storm drainage drawing that has all the parts, pipes, and their labels in model space (as a data reference) and everything shows up fine in Civil 3D 2010. But my drafter opened the drawing in regular 2010 auotcad with object enablers loaded and the labels were rotated to the world coordinate system and not the plan view. Is there a setting in the styles that controls this?
View 5 Replies View RelatedI have been sent a 2D site plan that is not to World Coordinates. How do I move this plan to the correct World Coordinates?
Using AutoCAD 2011
I am trying to import a MIF file from Mapinfo into AutoCad Map 2011. Which is a data base of geotechnical locations with added log data for each point.
The data seems to come in ok (correct location) but some of the points don't have any object data associated with them. When I id the point and trace it back to the database (originally an .xls file that has been imported into Mapinfo for the translation purpose) there should be a whole lot of data associated with it. most of the points are coming in with data but there are random points with no data.
A consultant working in PowerCADD 2000 sent me a DXF converted file. I have tried opening it in all CAD versions with no success.
I attempted converting it in word to txt file and then back to DXF but still no luck.
A customer has sent me a .sat file that is 297MB. Inventor is grinding at it, but its taking a very long time to open. Part count is up to 4323 open documents and the "Importing SAT Bodies-54%".
This has been running for two hours and it seems like it is getting slower and slower. My concern here is that this machine will run out of memory before it completes. It has 8GB of installed ram.
Any tips on bringing these large files into Inventor? Would a different neutral format be any faster/better?
I open a 3D file imported from the 3ds Max in the AutoCAD but when it opened in the AutoCAD, it full of meshes.
How to open/import a 3D file from 3ds Max to the AutoCAD so that it not as a mesh and it's a solid?