I have a storm drainage drawing that has all the parts, pipes, and their labels in model space (as a data reference) and everything shows up fine in Civil 3D 2010. But my drafter opened the drawing in regular 2010 auotcad with object enablers loaded and the labels were rotated to the world coordinate system and not the plan view. Is there a setting in the styles that controls this?
View 5 RepliesWhen I am in the World _plan view everything appears fine. When I use _plan to orient the view to a custom UCS the labels disappear.I'm using a Dell
Precision T3600 with 8 Gig RAM dual 2.8GHZ processor
Windows 7. Autocad Map 3D 2013 64-bit
NVIDIA Quadro 600 graphics card.
Is there a way to use text that will automatically orient itself to a 0 angle (left to right) in a viewport even if the viewport is rotated 90-degrees, or any degrees for that matter. Due to some pretty messy oriented viewports, My texts are rotated all over the place depending on what sheet I'm looking at.
View 3 Replies View RelatedI am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
I am trying to insert a tif that has a world file. I have AutoCAD Civil 3D 2013. I changed my workplace to Planning and Analysis. I clicked on the Image ican. I found the tif file I wanted (the tfw is in the same directory), I clicked open. It does not give me the option to select the tfw from the correlation source dropdown.
View 8 Replies View RelatedHow does Inventor decide how to orient the axis for a new sketch? Sometimes, when I create a sketch on a face of a feature, the sketch sometimes rotates to an odd angle (Untitled.png). I can create a sketch on a different, parallel surface and the sketch doesn't go to odd angles. Why does Inventor do this?
How do I edit the orientation? I've attached the part that I'm having the issue in. When I try to create a sketch on the face of the loft, the x/y does things I don't understand.
I have an assembly that is derived from a solid body part. The assembly can rotate in the part hence the .iam that was created using Make Components also rotates. The trouble is I need to make a template drawing showing the assembly in the same position all the time.
Is there a way to make a base view always look at a surface and follow that surface so that the view on the drawing always looks the same?
For example: If I had a dice and I create a base view of the two dots side of the die. If I roll the die I still want to see in the base view the two dots side of the die in the same orientation.
i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
I was working on my project today when the window popped up telling me to reload my pavement file. When I reloaded the file, the reference said it was unresolved. I tried to open that file directly, but it would not open.
View 3 Replies View RelatedWhen I try to open a LDD file with C3D, the file locks up and won't open. It appears to happen only when the LDD file has an alignment defined.
View 8 Replies View Relatedgetting Civil 3D to crash every time the Map Task Pane is opened from the Ribbon? if you type in MAPWSPACE, then it seems to "initiaite" it to work ok, but if you go right to the Ribbon: View tab > Palettes panel, and click it on there, it crashes every time.
View 1 Replies View RelatedShould I put elbow FK orient wieght 0 or 1 and vice-versa.
View 2 Replies View RelatedI am trying to label my drawing (bearings and distances) and am having a bit of trouble. . First, the precision isn't right. I keep trying to set the precision but whenever I add a parcel label it comes up with the wrong precision. Also, I can't get the scale of the labels right. They are too big and I can't seem to size them down any smaller.
View 2 Replies View RelatedWhen generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?
Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?
I am trying to create a label for slope ratios. I want to have the label show only whole numbers if it is a whole number and go to the 10th place only when necessary. Is there a way to use the label editor to do this? I would think it would work something like
IF(<General Segment Grade>=0|1|2|3|4|5|6|7|8|9 then <[General Segment Grade(FRun|P0|RN|AP|GC|UN|SD|OF)]> else <[General Segment Grade(FRun|P1|RN|AP|GC|UN|SD|OF)]>)
but I'm not even sure I'm going in the right direction.
Is there a way to add a field within a label style? I made a custom alignment label and I would like to add a field that references a sheet (I'm using SSM) i.e. "See Sheet 1-2".
View 6 Replies View RelatedI opened a project that i had not been into for a month and for some reason the surface and labels will not rebuild automatically anymore. Surface is set to rebuild automatic and i've gone in and changed the regenauto from on to off to on again, also rebooted the computer with no luck. I have a combination of feature lines and points. If I edit the elevations along the feature line the contours do not rebuild and the label does not change either. If I hover over the elevation node in the feature line it will show the new elevation but the elevation label for that point does not reflect the change, neither do the contours. If it is a point and I change it with the panorama window, the elevation tag will change but the contours do not rebuild until I tell it to rebuild. Any slope labels going to that point do not update with it though.
View 2 Replies View RelatedI need a style for intersection of alignments that automatically includes the abbreviations for Point On Tangent (POT), Point On Curve (POC), etc. I can create a style with the basic information of Station, Alignment Name, but adding the POT, POST, etc. in front of all alignment’s stationing and name doesn't seem available still in Civil 3D 2011.
View 9 Replies View RelatedI worked this out with C3D back in the day but for some reason I can't figure out how to renumber line tag label designations. What's making it tougher is that I need to create the tags in a block and try to create the line table OUTSIDE the block (this is so that I can have the block rotated to a deed bearing with dynamic labels in the block while retaining it's true orientation from state plane coordinates in model space). I have an old lisp file CLEARTAGS.lsp but this is not working. Perhaps this was made for 2010 or earlier. When I save the block, it jumps all the tag numbering way up for some reason.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
I seem to have a random, we'll say error for lack of a better term. I have a set of Point Styles with a Description Key set up for our survey points. When I import the points from a csv, I have 9 points that do not come in with the labels in the right spot. The label is supposed to sit next to the point style (see included image) Instead they sit 1 unit away. If you look at the included image you will see a point called COMH that is inserted correctly. Right above it is a point called WTMH that has the label coming in far to the right of the point style. Both the COMH and the WTMH have the same settings in the description key, and other than the block for the point, the same settings in the Point Style. I have completey re-written the description key, as well as re-created all the point styles, but this keeps happening. I have even re-created the block drawing and redefined the block in the dwt as well as an existing drawing.
P.S. I have added an image of the description key coding as well as the point style for the COMH andthe WTMH.
I am using Civil3D 2012 and have a drawing that will not allow me to add Contour Labels.
Unable to create contour labels
Issue You were unable to create contour labels. When you tried to create a single contour label, you could not select any of the contour lines of a surface. When you tried to create multiple contour labels, the contour label line disappeared after you selected the second point.
Can you individually orient photos in a contact sheet
View 3 Replies View Relatedacad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
My sections are showing a label for some of my links that are coded as "top". My label style for the "top" link is set to none and some of the labels are still displayed.
The labels show in the sections, but not the assembly. We are running Civil 3D 2012.
First - the alignment station label text size when viewed in model space is fine but when viewed in paper space it comes in way to big. How do i adjust this so i see things in paper space as they are in the model?
Second - Would like to adjust the station label style from the defalt 0+00.00 to 0+000.000
Is it possible to create C3D labels that are non-associative? That is, they do not adjust font size, etc., with changes in viewport scale.
C3D 2014
I accidentally deleted the major and minor station labels along my alignment. Is there a way to re-insert them?
View 5 Replies View RelatedI have an existing topic dwg and it has points from the survey crew shots in the dwg, I need to label this points. I want to extract the TC and Gutter information from the points by picking the the points I want to label.
View 1 Replies View RelatedI would live to label the PVI on my Profiles but not show the PVI label at the start and end of my profile. How to set this?
View 1 Replies View Related