When I try to use the move tool and hover over an object, the marker tool bounces around and has trouble finding the selection point. When I zoom in close to get the exact point on a line - it doesn't select anything, so I can't actually move an object.
I've tried adjusting the object snap settings however this doesn't seem to be working.
if I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
When I select more than 100 entities all of the grip points disappear. With ACAD 2002 there seemed to be no limit to the number of entities you could select without losing the grips, but with ACAD 2007 they started dissapearing though with '07 clicking "View" "Regen" would bring them back into view (unless you accidentally click on another entity). With ACAD 2013 if I go over 100 that's it. This is mostly a problem for me as I use the spacebar shortcuts extensively in creating and manipulating my drawings. I have found other ways to to acomplish my needs such as using the move command but I have much successful history using my old methods and would like to continue with them.
View 3 Replies View RelatedI wanted to select dimensions and change the precision to 2 decimal points.
For any dimensions I positioned on the object (like the width of the block centered in the block)...rather than above, below or off to the side. I am unable to select that dimension. Every time my cursor goes towards the dimension to select it.....the block itself is automatically selected. Any dimension outside the boundary of the object is fully selectable to edit.
I'd like to explode a polyline 2d, 3d or a simple line to single 3d points.Civil 3D (2013) how much you have to improve....
View 4 Replies View RelatedI've been able to successfully place R/W markers in my cross sections (as well as FO, TEL, GAS, Beam Guard). Where to find an Existing R/W marker ' EX R/W'?
View 6 Replies View Relatedif there is a simple way of pushing multiple Polylines to meet a final line that I draw.For instance if there is a zigzagged line, and I drew a line through the middle of it (in a similar direction).
Is there a command or script that would push all of the points on the zig-zag to meet with the straight line I drew?
Is there a way in the command line to select certain objects. For instance if there is a cirlce a line and a square can i just select the circle using the command line. When i try to save as an STL file i can't find it anywhere. Does surfsculpt not work? Everytime i use it it says it failed. Also when i make an ellipse is there anywhere to specify the X Y and Z lenghts?
View 6 Replies View RelatedIs there any way to increase the size of the marker that shows up on the plan view when you select a PI in the elevation editor? It is so small that if I have the feature line selected I can't see the marker over the highlighted line. I generally have to zoom to a PI so I can see where I am.
View 6 Replies View RelatedI want to navigate along my feature line, viewing which point is screen is the current point at the grid.
My feature line shows its points with blue circle & square grips and the current point is showed by a green circle.
The problem is the zoom level, Grips have always the same size but circular green indicator does not.
You can only view this last at a very detailed zoom.
I'd like to have a "big" arrow or something similar.The problem is the great difficulty to identify points....
Civil 3D (2013)
Tried the new geolocation today, and found the position markers to be quite useful.
However... Using WGS 84, they only show the latitude/longtitude with 4 decimals. And 0.0001 degree is about 11 meters in real life, so... I was hoping there was a setting to give me at least 5 decimals here.
In previous versions of Civil 3D there was a grip on the point marker that allowed me to rotate the block used as a point marker, where did this grip go in 2013? How can I rotate an individual point marker without having to create a separate point style?
View 1 Replies View RelatedI created a icon that I want to substitute the default square markers for in a line graph. When I apply the change, the icons are way to small. How do I adjust the size?
View 2 Replies View Relatedmaster im new in autocad 2014....i have a problem now when i select line or object it highlight or make a broken line....but when i select the other object or line my previous selected back to normal..i mean i can select only one line if i use single selecting....how to select all object or line with single select continuously, except using hold left click...
View 1 Replies View RelatedI accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone. It's akin to the "select other" window in Inventor when you select at the intersection of several objects.
How do I make this go away?
C3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
I wan't to move a line with color red and linetype continuous on layer Kader to another layer called Plaatuitslag.
Which code must I use to select the specific line and move it to the other layer Plaatuitslag?
Is it something like If line has color red and linetype continuous then move etc??
At the end i wan't to select all objects in the drawing which aren't on layer Plaatuitslag and delete all those objects.
I just want to select corner points and get the coordinates of all the points,and get all the points sorted by their X coordinate.What I am supposed to do?
View 4 Replies View RelatedWhen a check area and I start selecting and the "green window " appears it won't let me select more than 3 points
I was able to select multiple points. How can I fix this ?
How can I drag-select muliple vertex points form a polyline, a workaround I found is:
-select object
-shift select first vertex, shift select next vertex, etc
But this workaround is limited because I want to delete those vertexes, I cannot find the remove vertex command when I have multiple vertexes selected.
I am not sure why this is not working.
(setq SelectionSet (ssget "C" Point1 Point2 '((-4 . "<or") (0 . "CIRCLE") (0 . "MTEXT") (-4 . "<or"))))
I want to select circles and mtext within the specified points.
Code to select node points an/or text that has a Z value greater than "E1" and less than "E2". (where E1 and E2 are user input values)
View 5 Replies View RelatedI would like to get more advanced and creative with my creations. basically when i think AutoCAD i think lines so a nice short program to get started with is to create a line between two point (or simular). The tutorials online are wofel in learning the basics such as this is, need few starters on how to achieve this
View 4 Replies View RelatedI need to multiple select two control points on a box. Control, shift, other key combinations, etc. are not working. Control works in other apps; don't know why this is going on.
Any alternative to the key stroke for multiple selects in 3DS MAX?
Is there as easy way to count the points on a divided line? Example....making contour lines and need to interpolate the points between elevations.
View 3 Replies View RelatedIs there a way of reversing the start and end points of a line? I have a lot of mirrored lines on my model, and so the direction (start/end) is also mirrored. This poses a problem when i export the model to another program witch has a coordinate system based on the direction of the entity (in this case a line). So i come back to the question, is it possible to change(reverse) the start/end position to already drawn (mirrored) lines? Btw i am using acad2011
View 2 Replies View RelatedI draw a line then use divide command to put some points with equal distance in this line. some points will then are created on this line but when i move the line, the points do not move. I am wondering if these points can permanently stick to the line so that if i change the position of the line, the position of the points will also change.
View 9 Replies View RelatedFor example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies View RelatedI see that the points can be shift clicked to select the whole curve for global adjustment - is there an easier way?
View 6 Replies View RelatedThe direct selection and lasso tools keep selecting entire paths. I thought these tools were for selecting individual or small groups of anchor points so that they can be edited. I am using Illustrator CS6, and I'm not sure if I'm doing something wrong or if my program is being buggy.
View 2 Replies View RelatedI am working on a scanned black and white image that I image traced in Illustrator. I am now in the process of seperating certain parts of the image from each other for changing colors. I know how to do this, but my way is by using direct select and going in and picking out points and joining them which is going to take ages. Is there any way to say select a range of anchor points on a path (not the whole path, but not individual points either) like shift clicking a range of files in windows explorer? Are there any other ways I can go about this in a more time efficient manner? I am using the Creative Cloud.
View 1 Replies View Related