Code to select node points an/or text that has a Z value greater than "E1" and less than "E2". (where E1 and E2 are user input values)
View 5 RepliesI am not sure why this is not working.
(setq SelectionSet (ssget "C" Point1 Point2 '((-4 . "<or") (0 . "CIRCLE") (0 . "MTEXT") (-4 . "<or"))))
I want to select circles and mtext within the specified points.
this code is used to fix specific font but its problem that it will prompt you to select single text
i need to make it to select multiple text so it saves me a lot of time,
;;; Process Individual request
(defun cht_ProcessIndividual ()
(setq sslen (sslength sset))
(while (> sslen 0)
(setq temp (ssname sset (setq sslen (1- sslen))))
[Code]...
I am trying to select multiple instances of text (dtext) with different strings but want to change all of the fomats to the same settngs. I have searched high and low on the web to no avail. I am using AutoCAD 2012.
For example: I want the routine to find all instances of "AA", "AB", "AC", "AD", "BA", "BB", "BC", "BD", etc... all the way up to "ZD".
Next I want all of those text entities to change to the following text formats:
Text Style = STANDARD_96Layer = F-ANNO-CKTText Justification = MIDDLE CENTERText Width = .8
Getting this to work with just finding one string at a time with the ssget function seems simple enough, but it's getting it to work with multiple strings that I can't get past.
I am looking for some code that would allow me to select a MTEXT Entity - or other entity - (as the DEFAULT option) but also to allow me to type in some text manually or to pick a point in the drawing. Something that would present the user with:
"Select an object or [P to pick a point]" or
"Select MTEXT or [M to type].
I can write some code to type in text manually as the default option and get the second option to select entity using get string and then write some condition of if code but I don't know how to do it having entsel as default option.
I have a drawing that has 2D pipeline (only x and y, z value =0) and 3 topo contour lines ( with x, y and z vaules). I need to divide the the 2D pipeline into say 2000 points and then get the corresponding z values from the topo contour lines. I think it can be done by interpolating between the z values for the two apparent intersection points of the 2D line and the contour lines, the x and y values will be the same for the points that falls between these two aparent intersections. Is there any lisp out there that can do that.
View 7 Replies View RelatedI need to place a circle, of a user-defined radius, as a marker at the endpoints of all lines in a drawing. how to accomplish this using lisp? It doesn't matter if they overlap; I can use OVERKILL to delete those objects.
I started the code with:
(defun c:cmark ()
(setq crad (getdist "
Specify radius: "))
)
But don't know how to cycle through the objects, determine the end points of lines only.
What I have is a topo plan in 3D (All contour lines have x, y and z values). My pipeline is on x and y coordinate only. I need to get the corresponding z value for say about 2000 points on the pipeline.
View 9 Replies View RelatedI need very very often to know the angle between two surfaces to write cnc programms...At the moment i draw allways two lines normal to the line between the two surfaces an use then the angle measuring tool.Works good, faster then bks and dimensioning, but need also time and always need to delete the lines after...
Is it possible to get a lisp which ask für 1 point on the first surface, 1 point on the other surface and two points on the line between the 2 surfaces? So the lisp know 3 points of each surface and can give out the angle between... Should be allways between 0-180°
So it needs only 4 klicks to get a angle! That would be so great! Is there a lisp programmer who can make this possible?
how to use AutoLISP to draw lines between two points. I have x,y,z coordinates for the end points in an excel sheet which I can save as a text file. I need to pull the coordinates from the file and use them to draw the lines. There are 2000+ lines so it is not feasible to draw them manually.
View 8 Replies View RelatedLooking to make a selection set of points that are on a specific layer, and then create a dimension between, in this case, two points. I feel like it should be very simple, but I can't get it to work for the life of me. Here is the test code I've been playing around with:
(defun c:test (/ sel1 TC)
(setq sel1 (ssget "X" '((8 . "VPOINTS"))))
(setq TC (polar (entget (assoc 10 (ssname sel1 0))) (dtr 180.0) 9))
(command "DIMLINEAR" (entget (assoc 10 (ssname sel1 0))) (entget (assoc 10 (ssname sel1 1))) "V" (polar TC (dtr 180.0) 9) "")
[code].......
I have plines of circuits that sometimes have T's (line goes along, then T's out then back to T point and then continues).
Here is example line -
(setq List_Pline (list (list 0 0) (list 1 1) (list 0.5 1.5) (list 1 1) (list 2 2) (list 3 3) (list 3.5 2.5) (list 3 3) (list 4 4)))
nth 0 = (0 0)
nth 1 = (1 1) - T point
nth 2 = (0.5 1.5)
nth 3 = (1 1) - T return point
nth 4 = (2 2)
nth 5 = (3 3) - T point
nth 6 = (3.5 2.5)
nth 7 = (3 3) - T return point
nth 8 = (4 4)
I need to be able to pick 2 points along the line and find the shortest route.
Examples -
1st point at 1,1 and 2nd point at 3,3 - new line is nth's 3,4,5
1st point at 0,0 and 2nd point at 1,1 - new line is nth's 0,1
1st point at 2,2 and 2nd point at 3,3 - new line is nth's 4,5
1st point at 3,3 and 2nd point at 4,4 - new line is nth's 7,8
1st point at 0,0 and 2nd point at 3,3 - new line is nth's 0,1,2,3,4,5
1st point is 1,1 and 2nd point is 1,1 - new line is nth's 1,2,3
I've tried using vlax-curve-getParamAtPoint, but it returns 1st T point.
Synopsis of program -
Select Pline
Pick 1st point
check if on line
Pick 2nd point
check if on line
check if 2nd point is before 1st point, if so swap locations
find last nth of 1st point
find 1st nth of 2nd point
return list
I am trying to get the end points of an invisible line it would be the line that you offset I know all about polar I just don't know which angle to add or subtract and I will pick the point on the side I want it to be on I am going to pick 2 lines and I want them to offset invisible lines in the middle the lines are not parallel.
View 8 Replies View RelatedI have the below code, which works great accept if the layout tab doesn't have a viewport.What am I missing?
(defun ViewportLayerUpdate ()
(setq OLDcmdecho (getvar "cmdecho"))(setvar "cmdecho" 0)(setq OLDnomutt (getvar "nomutt"))(setvar "nomutt" 1)
(if (setq ss1 (ssget "X" (list (cons 0 "VIEWPORT"))))(if (setq ss (ssget "x" '((0 . "VIEWPORT") (-4 . "/=") (69 . 1))))
(command "CHPROP" ss1 "" "LA" "0-VPRT" "") ))
(if (setq ss1 (ssget "X" (list (cons 0 "VIEWPORT"))))(if (setq ss (ssget "x" '((0 . "VIEWPORT") (-4 . "/=") (69 . 1))))
(command "change" "p" "" "p" "color" "bylayer" "") ))
[code]...
Factory Design Suite Ultimate 2012
AutoCAD 2012 | Inventor Professional 2012 | Vault Professional 2012
Trying to add this macro to a new command in my cui. Does Select all not work in macros?
^C^Clayiso;;_select;all;;_chprop;la;c-rway-x;;
We have a need to select a tangent line/polyline etc and then select two other points we would then like to have the program draw an arc through the two points and yet still be tangent to the initial line/polyline that we picked. We don't care what the radius is as we believe there is only one solution anyway. It would be wonderful if we could just use the Arc command and select start>Second Point> then just use the Tangent Osnap but I guess that is out of the question :-)
The only code that I have come across that even resembles this only allows for one point not two (STILL VERY HANDY AND VERY SLICK)
(vl-load-com)
(defun near_vertex_arr (obj / dxf_obj e_next obj_vlax pt_sel par pt_first pt_snd i bulge)
;bruno.valsecchi
[Code]....
How does everyone else hande this? By they way... I dont care what language it is written in :-)
I know how to increment pick points numerically (see below). How is it done alphabetically?
(defun C:test (/ pt# pt) (setq pt# (getint "
Enter number: ")) (while (setq pt (getpoint "
Specify point: " ))(if (/= pt nil) (progn (command "TEXT" "M" pt "" "" pt#) (setq pt# (1+ pt#)) ) ) ) (princ))
I am using autocad 2013 and importing PDFs into the drawing and recently the OSnap points within the pdf are missing. The PDFs are of floorplans and I was able to measure from wall to wall using endpoints and midpoints. Now I am only able to select the endpoints on the frame of the pdf.
Is there a switch that might have been turned off?
I am looking for code to remove duplicate points (xy coords) from a list with a fuzz factor parameter.
View 1 Replies View RelatedMy first lisp, so bring it hard on me I want to be an expert in autolisp .
My lisp is meant to do the following:
draw a rectangle with ”0” fillet. It can be done either via rectangle command, or pline command. The attached lisp has the variant with the pline-case.
The, I need to draw inside a smaller rectangle, with a fillet value, that is promoted and indicated by the user. The smaller rectangle must be centered inside the bigger one. I thought it was a good idea, to take one insertion-point for the bigger rectangle.
and to calculate a 2-nd insertion-point for the smaller rectangle, via "polar" function.
What I get:
the 2-nd insertion point is put the same as the 1-st one.
I wish to draw the bigger rectangle with one layer "example: Layer 1", and the smaller rectangle with another layer "example: Layer 2".
I am working on a little lisp routine to draw splines, but can't get it working. The basic idea is that i first select a set of points that i can feed to my spline command.
(defun c:test2 () (setq pt (getpoint "
define point:")) (setq ptlist nil) (while (not (equal pt nil)) (setq ptlist (cons pt ptlist)) (setq pt (getpoint "
define point:")) ) )
Now i need to draw a spline based on these points. My plan whas to simply use the acad command itself. But this option didn't work.
(command "spline" ptlist "")
Then i tried using the vla-addspline command. But i can't even get this one working .
There are times that I have a really long curb polyline that has both line and arc segments. I wish to pick two points along that polyline and have it give me the distance between those two points along the path of the polyline.
Do we have this ability natively? Have I been missing something all this time? Normally I have to make a copy of the original entity, ... break, break, list erase or undo....
I have a list with many points is it possible that i can draw a line or polyline on those points using MapCar function.
View 6 Replies View Relatedwhat I am attempting -
Pick a line
Pick a starting point on the line
Pick a ending point on the line
Pick side to offset
create list of offset points
Create a new line with a offset
I think I could do this using brute force, but would prefer a mathematical solution.
I want tp write my first programm with autolisp. I use Autocad 2012(rus). When I run my script I see that some of points are missed in the autocad. Maybe I do something wrong?
(setq RB 300)(setq RM 70)(setq N 12)(setq M 11)(setq I 0)(setq J 0)(defun alphai (i) (/ (* (/ (* 360 i) N) PI) 180))(defun gammaj (j) (/ (* (/ (* 360 j) M) PI) 180))(defun XIJ (I J) (* (+ (* RM (cos (alphai I))) RB) (cos (gammaj J))))(defun YIJ (I J) (* (+ (* RM (cos (alphai I))) RB) (sin (gammaj J))))(defun zij (I J) (* RM (sin (alphai I))))(setq I 0)(setq J 0)(setq PT0 (list 0 0 0))(setvar "CMDECHO" 0)(repeatM (repeat N (setq PT (list (XIJ I J) (YIJ I J) (ZIJ I J))) (command "_point" PT) (setq I (+ I 1)) (setq PT0 PT) ) (setq I 0) (setq J (+ J 1)))
I have a lisp which I use to erase all points in a specific layer.
(defun cPL ()
(setq ss1 (ssget "x" (list '(0 . "point")'(8 . "Points"))))
(command ".erase" ss1 "")
(princ)
)
It is working only if I have the points in the DWG. If there are no points, I receive "Unknow command DPL". Is there anything I can do in order to avoid this error?
Just going over some old stormwater flows but have some other stuff included in the coordinates I have, is their anyway to convert lines to points?
I know a long way but im just seeing if theres a quick lisp routine that can do it for me?
I got this code in a web trawl to insert a block to points taken from a txt file......
its coming back with an error as follows:
; === Top statistic:
; Function definition (with number of arguments): ((C:INSERTBLOCKS . 0))
; Check done.
What does this mean and how can I fix it.
(defun c:insertBlocks (/ txtFile xyData expertVar attreqVar)(setq expertVar (getvar "expert"))
(setq attreqVar (getvar "attreq"))
(setvar "expert" 2)(setvar "attreq" 0)
(setq txtFile (open "c:\cad\textfile.txt" "r")) ;
[Code] ......
with a function like this I added some xdata, some MULTILEADER
(defun c:add_xdata () (princ "Select: ") (setq ogg (car (entsel))) (addXdata ogg "TEST" "CODICE" "1256") (addXdata ogg "TEST" "MATERIALE" "LEGNO") (addXdata ogg "TEST" "TIPO" "A"))
Now with the following function can only select leaders who have linked the xdata application TEST
(setq selez_all (ssget "X" '((0 . "MULTILEADER")(-3 ("TEST")))))
I can not, however, find a way to select all MULTILEADER who have a particular value of XData.
For example I would select all MULTILEADER with MATERIALE = "LEGNO" and TIPO = "A".
Newbie here trying to learn LISP. My first program is to flip all arcs and circles that have a Normal Z property of -1. But I'm having trouble finding a detailed list of commands and functions for the LISP language that explain creating circles to selecting entities filtered by properties. I must be searching for the wrong terminology.
View 9 Replies View RelatedI have the following code, that for some reason the last created dimension is no being selected. That's the first problem. The second (and not as improtant) problem( becasue it does work), is that I'm using the "dimedit" command. I prefer to do a swap within the dxf codes, that I treid but didn't work, so I resorted to the "dimedit" command.
(command "DIMLINEAR" pause pause pause)
(setq last_dim (entsel (entlast)))
(setq oldunits (getvar "lunits")) (setq oldprec (getvar "luprec"))
[Code].....