BenPruess-pyramid-egyptian-art.jpg
it's possible to crop one side of a 3D image & "FLATTEN" it with Corel Draw ?
Eg: The attached image shows a 3D Pyramid. Is it possible to crop out the side (with drawings) & "FLATTEN" it ?
So that i can simply print it out to serve as a template design.
i have an image on my workspace. its a rectangular image. Now, I want to crop an oval out of it. So everything else around it will dissapear. How do i do this? I was thinking the CUT tool, but that only cuts from point to point.
View 3 Replies View RelatedJust wondering if I'm missing something when I select the crop tool to remove a section of a image. Is there any way to move the marquee around as if it was a square converted to curves...just move the handles to say a triangle? I know I can powerclip to any curve design I can create..it just looks as if you can use the handles to flip, rotate, etc..
Windows 7 64 bit, Intel Xeon 3.30GHz, 32GB memory, ATI FirePro V4800, (1)10,000 Velosirapptor internal HD, (1) internal 1TB HD, (1) 500GB external HD (2) external 3TB HDs, (2) HP z6200 printers, (1) OKI 9650 printer (1) Roland Camm1 Pro vinyl cutter
We are using corel x6 how can you flatten layers we are having print issues. We have a new plotter and does not recognize layers in corel and prints all black. We use many scans in our work. If we combine layers would it pile all scans on top of one another .
View 5 Replies View RelatedI was hoping this feature would be added in X6, and in retrospect I should have asked about this before they released X6 :S
When exporting to PDF in Corel it would be great if there could be an option to get rid of the layers. The problems with layers in PDF it uses a lot more resources and when I combine 20+ PDFs together it barely opens on slower computers. Also, my clients can see what my layer names are in the PDF and I would prefer if they couldn't.
This was exported to tif and sent to the printer, the glow is a white outer glow.
As I usually do I exported the whole thing to a TIF and low and behold black lines in the print.
This was the bullet proof way of getting what you saw on the screen to hadcopy but sadly no more.
Can this be addressed in SP1, as it puts a serious hole in all the signies bag of tricks for that matter any body who wants to output special EFX from Corel.
My color toolbar on the right side of the screen is gone. How do I get it back?
View 3 Replies View Relatedbar-1.gif
How to tweak this page bar scrolls to right side edge, so that space can be provided for the pages. I have moved to the extreme right, but after restarting it is occupying all the space. Put that one to extreme right or even by removing also no problem for me, since i use hand tool very effectively than this.
Even the vertical bar as well (to remove or hide at least)
what I do is design one half of my design first. When I like what I have I duplicate that part of the design and then mirror it horizontally. I then save the file. Close out of the program. Turn it back on the next day, and some of my gradients are now messed up on the side that was mirrored.
As you can see the left snippet is how it should look, the right mirrored snippet's gradients should match but the don't. Some of the gradient. (not all of them though). It's really bizarre. It doesn't happen often, the only times I can remember it happening is when working on really large complex designs. Oh also, it is effecting gradient fills and transparency linear gradients.
This time, my color palette that was on the right side of my screen is gone. How do I get it back on there?
View 3 Replies View RelatedI did something on the screen and removed the tool bar on the left side of the screen. How to get it back?
View 2 Replies View RelatedProblem as we have with CD X5 when trying to crop a PowerClip Object with another object?
When we try to crop a PowerClip object with a rectangle or any other shape X5 just crashes.
How or were to find the crop mark / registration mark tools in x6.
View 5 Replies View RelatedWhen I step & repeat the crop marks are not there. How I get the crop marks for cutting multi up items.
View 5 Replies View RelatedI need to crop pictures of horses to fit within a specified oval shape and size but i dont know how to do it within the corel program, i print it out on special vinyl then cut it on my Roland GX-24 and press it on to an item of clothing and i need to get 2 horses on 1 sheel of paper.
View 8 Replies View RelatedI'm the IT manager at a rather large company which uses graphics quite often. Currently, our art staff uses CorelDraw x3 & x4. Most of what they work with is CDR & EPS files but occasionally PLT as well..
I have looked all over Google for a program that will display a CDR file, but cannot find a good one. A found a couple that will display the thumbnail, but not much else. I wouldn't mind that, but it's not legible on most images.
What we are looking for is an app to install on our reps machines so that they can view these files with a customer.
crest 1.cdr
I have been playing with the nodes at the peak of this image but I can't get a uniform line.
porta1.cdr
Is there a easier way to clean up this image, I have been going through and deleting nodes and moving some. I am still learning but there has to be a better way.
I want to use an image I have imported to Coreldraw x5 as a reference picture to trace around.
I am not sure how to dim the opacity of the reference image so that It is easier to to trace around.
I've been using Photopaint 12 for years. This seems like it should be very simple to do, but I've never found a really quick way.
All I want to do is put a single colour 1 or 2 pixel border around a load of images. I don't mind if it is inside or outside the existing image size (the choice would be nice).
I know I can simply draw an unfilled rectangle, but it's easy to drag the shape outside the edges of the image, or to end up a few pixels in, and it's quite time consuming doing it manually.
Is there a way to tile one of my own images? I want to make a 6x6 image into a 12x12 image so it reproduces a blend of that image 4 times, rather than having 4 images with visible edges.
It was something I could do in PSP years ago when I used it.
I have the following product label for a customer and need to know how to curve the top rounded like it is, from using a rectangle photo.
View 4 Replies View RelatedI am trying to put a client's qr code png on a file I am creating for them. It seems to be a regular png file, but when I try to import or paste in either CD or PP all I get is a black square.
What is strange is I can open this same png with Intraview no problem, I can copy and paste it into Word with no problem, I can open it in Adobe PHotoshop Elements without a problem. I also can open and view it in Windows Live Photo Gallery. It is just in CorelDraw X5 that I am experiencing the problem.
I am trying to export an image to PNG, tried watching the videos here but it doesnt seem to work, im still getting the white background. I have corel graphics suite 11
View 5 Replies View RelatedWhat is the best way of creating the two tones of the palm leaves and trunck of this palm tree.
View 14 Replies View RelatedHow to straighten an image in Coreldraw?
I try the crop tool, envelope tool, but couldn't find a way to do it.
When I used the erasor to remove the fill from inside an image which has been powertraced, the bits which have been erased turn black, rather than transparent.
View 5 Replies View RelatedI am fairly inexperienced using Corel. I work with Corel in a technical capacity for my job. We use it to transform DXF (AutoCAD) files into image files that can then be imported into another very specialized program for weaving.
The problem I am having is this. I would like to be able to export image files from corel that have a specified height, in pixels, larger than 10,000. In the woven program, the pixels of the incoming drawing have a real, physical representation. Namely, the number of pixels wide and high in the drawing translates directly into the number of yarns wide and high in a woven cloth repeat (weft (pick count) and warp (end count) for those who are familiar). We have some designs that require the length be longer than the 10,000 limit, and until recently we have been working around this by resizing ("scaling") the image without keeping the aspect ratio in the woven image editing program. This does ok, but when the lines and curves in the drawing get "stretched," they become very uneven and this is frustrating.
We cannot use jpg file formats because when the lines and curves of a dxf file are converted to an image and then exported from corel as a jpg, the lines do not remain smooth and complete. In other words, they become a series of standalone dots. This severely complicates working with the image in other steps. Currently, our standard is to use .tif files, and .bmp files also seem to work. However, neither seems to allow the exportation of images in excess of 10,000 pixels long.
Is there a different way we could be creating these images in order to get the type of accuracy we are looking for? DXF files have to be successfully made into image files that maintain the proportions set out in AutoCAD and which also are longer than 10,000 pixels.
Being in the Heat Transfer business, there is a new paper out that rids the paper print called "Image Clip", it has a procedure that to make it work. Printing a mirrored image on transfer paper and printing another image with laser but a "NEGATIVE". I have suite X4, any quick ways to make the image using my Corel, their instructions is only in Photoshop, I prefer Corel?
View 6 Replies View RelatedI actually want to put a photo into a heart shape.
View 1 Replies View RelatedImage below, what I want to do is remove the parts of the red logo below the black line. normally I would use the virtual segment delete tool. this is working with the red outer line, but not on the letters. rather than removing the part of the letter below the line, it is removing the whole letter. Also it is leaving a square edge on the line, and not removing it on an angle.
View 11 Replies View Related