CorelDRAW X5 :: H And V Position Changing
Aug 9, 2011
CorelDrawX5-PositionBug.gi...
I am running CorelDraw version 15.2.0.686 with Service Pack 1.
I need to position graphics in exact locations and using the Transformation Position window, especially with Nudge and Super Nudge, is very useful. However, when I zoom in or out, go to another page of the document and back again, or close and re-open the file, many times the H and/or V coordinates shown in the Position window will have changed by one or two units (sometimes more). I can change them back to the correct coordinates but they will change again, and not necessarily by the same amount, when doing any of the actions I mentioned.
It's not that big of an issue when I know the location ends in either a 0 or a 5 and I can move it back to the correct location, but there are times when the graphics are not on a round number and I don't know if it correct or not.
This has been a bug in many versions of Corel (I have been a CorelDraw user since the beginning), but it is happening with every file I work on in X5.
View 5 Replies
ADVERTISEMENT
Dec 18, 2012
I am trying to change the position of an AttributeDefinition in a block, but it nothing is changed:
foreach (ObjectId oidAttribute in btrBlock){ adOrg = taTransaction.GetObject(oidAttribute, OpenMode.ForRead) as AttributeDefinition; if (adOrg != null) { adOrg.UpgradeOpen(); adOrg.Position = new Point3d(0, 0, 0); // Break; break; } adOrg = null;}
...
Commit();
How do I change the position?
View 4 Replies
View Related
Jan 27, 2014
How to change position of several objects toward center (let's say all objects have pivot point in one place) ?
View 4 Replies
View Related
Aug 23, 2013
For some reason, the camera pivot has changed..Whenever I set it to anything, it keeps going back to the stupid configuration of being 5 meters away from my plot... which means the slightest rotation makes me lose the view.
I tried using the navigation the navigation wheel's "center", but it sets it in two dimensions of the projection's plot on my screen, which is not enough.
And I tried the command alias "3DO", but every time I do it, it works only once... and for some reason the camera pivot gets lost again on the next move.
how to change the camera pivot position by entering it somewhere like (0,0,0).
View 2 Replies
View Related
Oct 24, 2013
I find corners and line caps in outline properties in CorelDraw x6.
But where is POSITION, like in previous versions?
I want to create outline inside object.
Behind fill is not what I want.
View 5 Replies
View Related
Jun 18, 2013
I am curious is it possible in CorelDRAW X6 to move (change Position) of an object and Rotate it at the same time?
What I am after: To create raw of equally spaced (given space) multiple (e.g. 21) successively rotated (given angle) images.
CorelDRAW X6
View 3 Replies
View Related
Nov 21, 2011
Platform specifics: Windows Vista 64bit, Corel graphics Suite X4
Recently (for a month ?), when I open Corel Photo Paint (by any method), the window opens not in a maximized size, but almost, with the upper border just off screen and the right border barely visible on the far right side of the monitor screen. To relocate the PP window I have to place the cursor on the right window border, click (the cursor changes to the left/right cursor), and slide the window to the left . When I do this, the entire PP window "snaps"downward just enough for me to "grab" the upper right corner (the cursor changes to the diagonal arrows). This doesn't occur with the Draw program.
I have tried opening/closing, resizing with new files, no files, old files, from the Taskbar, from the "exe" program, Start menu, the Open with option, etc. Nothing I do will force the opening window to open in the size/location it was lastly closed in (as I remember it doing). Even using the Ctrl key/Exit, as suggested elsewhere here for another's problem.
View 8 Replies
View Related
Aug 15, 2011
I am trying to center objects in the page but for some reason the Object Position is not working. I am doing a 24x36 poster and when I type 12 in to center the object it is not working.
View 2 Replies
View Related
Jun 23, 2011
I am having trouble with the xy axis. They register 0 instead of the actual position of an object. Rulers are showing correctly, and guides show correctly. Recently re-installed X5 and Patches 1-3.
View 4 Replies
View Related
Sep 8, 2011
I'm trying to write a script to put printing ticks around the selection. I can get the height and width of the selection, but I cant find anything like "position" or "location" in the methods to get the selections X and Y on the document.
View 5 Replies
View Related
Apr 6, 2013
On my tool barin transformation bar i had position - absolute (coordinates) and size of a selected object.
i changed something and now i have position like 0.00 x 0.00 (i think its relative position) and when i write something in position it moves relative to previous.
when i press alt+f7 i can change position relative and absolute but toolbar don't change. How to set toolbar to show me always absolute position?
View 7 Replies
View Related
Aug 12, 2013
i am redrawing an image and used guidelines to insure straight lines. the problem i am having is when i try to put a node on the intersecting lines, it jumps away from where i have placed it. i do not have any of the snap items turned on and am not using a grid in the background. Why will the nodes not go where they are being place? i have been using corel for years and have not had this problem before.
View 8 Replies
View Related
Apr 21, 2013
Is there a way to be able to set the position of fountain fill to more than 100? Wasn't this possible in previous versions of Corel Draw?Anyways, I want to achieve the result as shown below. The logical way would be to set position to more than 100, and than to adjust the gradient colors manually to get the look with less curved arch as in gradient on the left side. I think it is obvious why this is very important. I know that there are multiple other ways to achieve this, as you can see that I did (converting to bitmap and crop in this situation in this case), but these are all limited workarounds, and the only "clean" way to do this is as I described.is possible to adjust the gradient in toolbar to more than 100 by mouse dragging it, but it doesn't apply to the object.
View 10 Replies
View Related
Aug 23, 2012
Change side position of image to face forward?
View 8 Replies
View Related
Jul 12, 2013
Is it possible to setup a block so that an attribute position remaines fixed (absolute to drawing) when moving the block?
I've been playing around with creating a Coordinate Block by following these instructions: [URL] ........
What I would like is to be able to set the position of the Coordinate Label and Coordinate Object independently, so that if I move one in the drawing, it doesn't move the other. I've looked into Dynamic Blocks, and the "Lock Position" parameter. I can move the attribute independently, but still everytime I move the block, the attribute moves too.
Our company uses a custom Sheet/Coordinate system to follow flyoffs across a drawing, and I'm trying to learn how to automate the process. It's completely manually right now, so any changes to a drawing creates a lot of work renumbering these flyoffs.
View 4 Replies
View Related
Dec 16, 2012
I need join open nodes in complex objects. (Import >mechanical design DXF file)
Function close curves work terribly .
I would have to manually select two open nodes on this same position and click "Join two nodes".I have 8000 nodes to join.
View 5 Replies
View Related
Dec 12, 2012
In X5, I was able to edit the position of the line for underline text : Thickness and position, up or down in %
The last command for Characters Effect | Underline was « Modified... »
Cannot find it in X6 ! It's not available in the same menu !
View 11 Replies
View Related
Dec 1, 2013
I have a document i am designing that has a front and a back to it, its not a business card.
How do i align/position the two sides so i get specific elements where i want them on the back side,
the problem is not with the front and i only need to position the back and specifically, i have checked out the print preview imposition tool and only seems to just print duplicate copies however many times need, unless i used it incorrectly,
I mean i could manually try to set them up and waste a lot of ink and paper positioning the two sides but i believe there is a faster/smarter method to accomplish this.
View 1 Replies
View Related
Oct 1, 2013
Is there any way to make print merge fields relative in position to other fields or to non-variable text.
For example if I am doing address labels and I have fields for City and State:
Their positions are absolute, and the state ends up overwriting the city for long city text, as does the comma.
What I want is for the comma to follow the last letter of the city, and then state to follow that.
And yes, I realize that I can combine all three into one field, but I am asking this as a general usage of the feature. One doesn't always have control over the source.
View 3 Replies
View Related
Nov 9, 2011
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
View 4 Replies
View Related
Mar 13, 2013
I have two large format printers that are different Epson Models. When setting up the second printer I accidentally chose the wrong PPD for it. So now when I go to print the PPD is checked (the wrong one) and I can't figure out how to switch it. If I uncheck it and recheck it I never get the pop up window to actually choose the PPD. Corel just assumes I want to use the first one I chose. (doesn't it know a click around like a maniac and I'm accident prone?) how can I switch PPDs.
View 5 Replies
View Related
Apr 3, 2012
Changing the " Origin " on guidelines. The default is to have the point of origin at the bottom left of ones page. I want to be able to change that and keep it as a default so that my point of origin is at the top left corner of my page.
View 1 Replies
View Related
May 9, 2012
Windows 7 64-bit / CorelDraw X4 Educational Version with Service Pack 2 installed
I was working on a file last night and had objects Powerclipped into an object. Next thing I know, the colors are all completely off. They just changed on their own. I don't know if I saved the file and it just did this, or if it just did it on its own. But it always seems to be related to the Powerclip. This isn't the first time I've lost information using X4's Powerclip.
The scarier part is that it seems to be affecting multiple documents of mine that have used the same color. We're talking about months of work.
Also, this isn't the first time colors have just changed on me after closing a document and reopening it. I've set colors to RGB black and when I've reopened it at a later time, it changes to R:2 G:2 B:2
Tonight I'm going to try and uninstall X4 and reinstall and see if it remedies the issue. If that doesn't work, I'm going to try a different version, perhaps downloading a trial of X6 and see if it corrects the issue.
View 2 Replies
View Related
May 15, 2013
Is there an easy way to ensure that the position of attributes on a block match the position on another block?
I just used the ATTIN command to upload a bunch of data to the block attributes on a drawing, and now the information is all over the place.
Instead of going through each one manually and repositioning the attributes (a VERY lengthy process), I want to use a "correct" version as a template of sorts to inform the other selected blocks of where to place the attributes and have it reposition the whole thing automatically.
Is this even possible?
View 6 Replies
View Related
Apr 15, 2011
I have a string of white paragraph text, to which I have assigned a simple hyperlink to a selection. CorelDraw X5 turns the linked text blue to indicate that it is a live link and the Publish to PDF function works as expected. I want, however, for the linked text to be yellow, not blue, and I can't seem to be able to accomplish this. If I change the text to yellow the conventional way, the hyperlink no longer functions.
Is there a way for me to simply change the color of an active hyperlink?
View 10 Replies
View Related
Sep 16, 2011
Hurricane Irene has hit us hard and I lost 4 computers.
I downloaded X4 again and when I re-open a file that was designed in x4 previously, all colors replicate except RGB Green (0,255,0) that we use as a cutting contour on a Roland print/cut. There are hundreds of files. It now opens it as Green (4,255,2).
We need to use RGB because of 10 years of files written in Corel 3-11.
Now I realize that files we just composed and saved are also opening with the same results.
View 6 Replies
View Related
Aug 6, 2013
How do I pick one color (white) and make it transparent. I am importing .tiff images and need to make the white background transparent.
View 1 Replies
View Related
Oct 4, 2012
I have found macro's to change specific RGB values to different specific values within a Corel file. I have not been successful in finding a solution on applying the same sort of change across multiple files. i.e. All Corel files within a folder will search for specific RGB's that I`ve told it to change to other specific RGB's.
I know that Corel has a macro that accomplishes a batch process where it will convert files to different file types.
View 1 Replies
View Related
Jun 18, 2012
I can no longer type in the size of an object. I draw a rectangle and then type in the correct size. Nothing happens. The size of the box does not change.
It's the same with text. If I type a name that needs to fit a certain area, I type in the size for the width and it doesn't change.
View 12 Replies
View Related
Oct 17, 2013
I have a problem with my table in Corel Draw X6.
So, my table has a few rows and a few columns. I want the width of the first cell of the last row to be wider by 1 cm than the width of the first cells of the other rows.
When i select a cell and resize it with my cursor, the whole column changes width. I want the column to stay as it is, just its last cell to change width. How to do this?
View 1 Replies
View Related
May 29, 2012
What I am trying to do is check if a shape does not match a known set of values. If it does not it will run code where the "If msgbox" is at. What I have works if my line or object has a Cyan outline. The issue I am having is when it is checking a line that is any other color that doesn't have Cyan = 100, it errors out.
Below is what I am trying to use.
Sub Start() Dim s As Shape Dim sr As ShapeRange ' ActivePage.Shapes.All.CreateSelection Set sr = ActiveSelectionRange For Each s In sr If s.Type = cdrTextShape Then GoTo s_A If s.Outline.Color.CMYKCyan = 100 Then GoTo s_A If MsgBox("dude", vbOKCancel) = vbCancel Then GoTo s_B s_A: Next ss_B:End Sub
View 14 Replies
View Related
