What I am having trouble with is that I need to get a true elevation. When you use the scroll wheel the model moves away from a true elevation, either above or below ground level. I need the tru elevation to create 2D sections using flatshot.
View 2 Replies
The Architect posted a drawing that I must print in 2012 format (she forgot to save to 2004). I have tried 6 machines in our office this morning, attempting to get True View 2013 to run. The exact same error problem that plagued my attempts to use True View 2012 are occurring. True View says .NET 4.0 isn't installed. The problem is, that it is installed and running correctly. In two of the machines I went through the repair process of .NET 4.0 to see if there was a problem. There wasn't, no change; True View still errored out before installing. Is this a problem with buggy software? Are there any other options open to me? I don't know why they stopped updating True Convert. It was far superior and not full of programming/install bugs.
View 9 Replies View RelatedI am trying to create a pdf file from a dwg file, using DWG True View 2013. I am NOT a CAD user, so all of the terms are new to me. I read that sometimes it's better to convert the DWG to DWF first and then convert it to PDF. So, I tried 'export' to DWF after trying 'export' to PDF. In both cases, after pressing SAVE, I tried to find the new file and couldn't. Basically, I am trying to print out a DWG file (that is in color), so when I print the DWG directly, you can't see the lines very well. That's why I'm trying to convert it to a pdf first.
View 1 Replies View RelatedI installed acad 2014 and copied all my font files into the directory that cad says it looks in under the support paths, and the main font used is a true text font (penguin) and it is not showing up right.
View 2 Replies View RelatedI have a curved piece of acrylic in a design that is a section of a cone with 2 holes in it (for a structure to pass through), I need to try and flatten it for CNC matching.
View 1 Replies View RelatedIs their a way to create a spot elevation in AutoCAD LT 2013?
View 1 Replies View RelatedIn regular conditions de elevation of every object that I creat is Z= 0
Lines starting and ending points are at this level, circle centers -and circles as objects- polylines etc.
How is possible to setup a different elevation for my objects?
Second case: Just in case I rotate my UCS and having my drawing doing all my objects in the plane X-Z therefore my coordinate Y as default for every object, could I set up the Y coordinate as required?
There is a coworker of mine that seems to have an issue pop up in random files here. He is drawing his siteplan on a file received from a consultant, the issue he's having is that if a line has any sort of elevation to it, he can't extend another line to it. He can flatten the line and then extend to it, but if the same issue is tried on any other machine, the rest of us can extend the line without issue regardless of it having elevation or not. The frustrating part is that he couldn't tell the line had any elevation to it until he took the precision value out to 8 digits. The line he couldn't extend to had an elevation of 0.00000004. But as I said, his machine is the only one that has this issue. We are all running AutoCAD 2013 on Windows 7 64 Bit. Is there a setting or variable somewhere controlling this behavior?
View 5 Replies View Relatedwhat I need to do to fix the elevation tag block below? I want the text to rotate and be readable as I rotate the block. Right now the text rotates but it's not readable when it's on the left hand side.
View 3 Replies View RelatedIn AutoCAD Architecture 2009, we had this awesome button that would basically "lock" the z-axis. This was very handy to move 3D objects around in the same plane.
Now in AutoCAD 2013, the button is no longer there! I found that you can make it a full-time change in the Options/Drafting tab, but we like to switch back and forth with this and that button was really handy.
I've also read that in older versions you could run the "AecProject.arx" file, but we don't have that in our AutoCAD 2013 folder (and I can't find it anywhere else on our hard drives.)
We do have AutoCAD Architecture 2013 but I was trying to only utilize what I needed rather than turn on Architecture every day.
I made a lake using lines set at different elevations to show depth, is there a way to calculate the volume of the lake in AutoCAD 2013 from just the line elevations and area without having to make the lines a solid surface
View 2 Replies View RelatedThe way I used to adjust feature lines was to highlight the node I wanted to adjust and then raise or lower that elevation incrementally until I got to a grade that worked.
Now I've noticed that when I highlight a node and hit the button to raise or lower, it forgets which node I had highlighted after the first press. This is a problem because now I either have to click on the node every time, because if I don't it will raise or lower the elevation of the entire feature line.
how to get 2013 C3D to create a large watershed with a big elevation drop? Arcview can do it, but I bought the new version of AutoCad, which meant a new computer, instead of the Arcview extension and I don't see it happening.
View 9 Replies View RelatedI went to content browser and loaded the "Plan Elevation Label" onto my tool palette when I go to place the label in the drawing it prompts for elevation and nothing else.
How can you change the rotation on the screen accept to use the rotation command?
The tag itself is referencing a block I went to the block and changed the block now if I go to insert the multi view block it prompts for rotation but not to edit the attribute is there any way to get it to do both?
We using CODEBOOK to generate the layout plan, elevation. When we insert form CODEBOOK this alert appear.
Last time, we work with ACAD 2011 normally. Got the problem when upgrade to 2013.
See the attached.
I am trying to create an elevation label that will give me the spot elevation followed by the letters "TC" and then on the line below subtract 4 inches from the elevation followed by the letters "BC". It's easy enogh to add the letters but the simple equation of elevation - 4 inches eludes me.
View 3 Replies View RelatedWhen I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.
-changing osnapz variable
-latest civil 3d service pack
A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue
i have some existing drainage pipe and structures in a base plan that i need to change the invert (which is the easy part) and the top elevation to the existing top elevation that does not meet the minimum presect in civil 3d 2012 is there a way to change these min. to match my exisitng elevation for example i have a catch basin invert is 15.45 top is 17.56 with a 18" rcp the cover will be less than 12" and i need to change this.
View 3 Replies View RelatedA coworker believes an elevation tag can be placed in plan view A, but can be moved in plan view B without relocating it in plan view A. My experience...move an elevation tag in one view and it will be relocated in all views. Is there a way to have two different locations but reference the same elevation?
View 3 Replies View RelatedI'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
Any way using autoCAD LT 2014 to get CAD to display the elevation heights of survey points without having to type the heights in text bozes next to each individual point. i can insert a field which displays the elevation of the point but doing this again i would have to do every point individually.
Another words is there a way to select all the survey points required and get CAD to display a certain property, which in my case is the elevation height of that survey point, next to it? so it looks like x 23.35 x 23.57 etc..
I am trying to insert blocks into my drawings and for the most part I have been successful using Design Center. However, I have difficulties turning some of those blocks from the Plan View into the Elevation View, even when they show as elevation blocks. Even the downloads that show as 3-D end up being inserted as 2-D in plan view. In floor plan mode, I have no problem; so how do I turn them into 2-D in elevation mode?
View 1 Replies View RelatedWhen I try to plot a pdf of my drawing, the elements are distorted (circles larger, plines thicker, etc). How can I convert to a true pdf? I have AutoCAD 2012 student version.
View 3 Replies View Relatednow i can get the anonymous blockname like 'uxxx', but i want to know the original block name before the insert changed to an anonymous block.
ps,the block is not a dynamic block.
I am making use of some of the building models created using CAD. Since the models are added to virtual earth, I would like to get clarified for few of my doubts,
1) say, when the buildings of true representation on ground is made, whether any reference axis with respect to ground is considered to build the model?
2) How the scaling is made for the same model with respect to ground?
I am trying to find out how to print a true color solid hatch for a rendered site plan. I can change the color in layer properties but when I go to print, it shows and prints a darker more saturated color almost like an autocad color. When I select the transparency button it seems to be closer to the real color.
View 7 Replies View RelatedI want to use a true type font on my CAD template. I have copied the file and saved it in the fonts folder (path x64/acadlt/windows/fonts), however in CAD when i try to select the font it is not available on the list.
View 9 Replies View RelatedWhen I start Inventor2011 with classic UI only first start set in my addin FirstTime on true, every oder run of inventor FirstTime is false - everythink is OK.
But when I change UI on Ribbon FirstTIme is always True, and every time UI is reloaded -there is bed.
Last week I downloaded the Autodesk Design Review and for some reason I installed the DWG TrueView as well. Now, every time I open up a .dwg through explorer, True View overrules AutoCAD and thinks it has to be the one to open the file. Is there any way to turn this program off?
View 5 Replies View RelatedI'm working with AutoCAD 2012 x64 and I need a control to view DWG files selected in my ListView. I tried using DWG True View 2013 and it worked well, but this is more than my requirement. My requirement is to simply show a preview of the drawing. But DWGTrue View is an advance control and is not standalone i.e. Users have to download and install its full installer.
This might require some customization to code in order to fix TOP View and do a Zoom Extent: Currently not succeeded.
I also seek using DWGThumnailviewer.ocx referenced in this post but unfortunately, I couldn't find DWGThumnailViewer.ocx with AutoCAD 2012. I guess it was discontinued.
Other option could be to generate a raster graphic file (*.jpg, *.gif, *.png, *.bmp) and display that into a picture box. I tried some code from this thread and this one but at some small dwg files, it is unable to read bytes.
I have to deal with the plans of others, some who change the dimensions through text formatting that I can see are fake or incorrect. I used to have a command that would detect the ACTUAL dimension but I can't seem to find it in ACAD 2010. find the command to restore the true dimensions?
View 3 Replies View Related
