AutoCAD 2013 :: Setup Different Elevation For Objects?
Mar 20, 2013
In regular conditions de elevation of every object that I creat is Z= 0
Lines starting and ending points are at this level, circle centers -and circles as objects- polylines etc.
How is possible to setup a different elevation for my objects?
Second case: Just in case I rotate my UCS and having my drawing doing all my objects in the plane X-Z therefore my coordinate Y as default for every object, could I set up the Y coordinate as required?
View 1 Replies
ADVERTISEMENT
May 28, 2013
We using CODEBOOK to generate the layout plan, elevation. When we insert form CODEBOOK this alert appear.
Last time, we work with ACAD 2011 normally. Got the problem when upgrade to 2013.
See the attached.
View 9 Replies
View Related
May 20, 2011
Can I setup certain layers so that they are always above all other objects?
View 2 Replies
View Related
Nov 21, 2013
I'm currently creating blocks for our office library. One of these is a grille with some apposed blade dampers on it. I'm trying to set up an array that will duplicate the apposed blades as I change the length of the grille. However, it will only copy the blades in pairs, not singly one after the other. Ie, the blades are 100mm apart, and in a / pattern meaning that each instance of / or 'should' duplicate every 200mm. Except when I lengthen the block by 200mm it won't duplicate until I've gone double the distance (400) when it gives me both / and .
View 8 Replies
View Related
Nov 14, 2013
ACA 2011
So, I extract elevations from my model. No prob. Works perfectly. I then often edit linework to change some linework colors...works fine. However, What if I want to change/edit a Hatch? When I click on 'Edit Linework', the hatch automatically turns off to allow me to edit the linework... Can one edit the Hatching?
View 4 Replies
View Related
Jul 18, 2012
I just gave one of my drafters a new PC with AutoCAD 2013 and 2012 on it. We migrated the settings from her old pc with with 2012 to the new PC. All settings are correct except for the plotter. She had custom page setup that was used on all her drawings and that did not transfer. We setup a new one with the same settings but that requires us to reapply to every drawing.
Isn't there an easy way to do transfer these settings? If we choose the page setup most of the time it just goes back to none and a lot of the time it isn't even an option.
View 9 Replies
View Related
May 1, 2013
My drawings typically have 5-10 pages(layouts). The page setup on the layouts have the printer name set to my printer in my office. So I can pulish all layouts and print them all at once. I would like to be able to send these drawings to others with different printers and have them be able to print all layouts at once without going and and changing page setups or anything like that, its mostly non autocad people. How can I set this up?
View 8 Replies
View Related
Mar 3, 2013
I have just downloaded the 3 year trial of AutoCAD for students. I have managed to create a floor plan but struggling to amend the layout. First of all, I would like the page setup to be A3 but that is not an option on my Page Setup Manager as it will only connect to my printer size.
I am also trying to add a Title Block but again do not know what I am doing, or where to download template ones for free?
View 1 Replies
View Related
Jul 13, 2012
What I am having trouble with is that I need to get a true elevation. When you use the scroll wheel the model moves away from a true elevation, either above or below ground level. I need the tru elevation to create 2D sections using flatshot.
View 2 Replies
View Related
Jan 11, 2013
getting consistent crash when clicking on "new" in page setup manager dialog box.
Happens regardless of which drawing is open. Even for new blank drawings.This prevents me from creating new pagesetup overrides for Publishing. MAJOR PROBLEM.
At this point I have to get other people in the office to create new page setup for me. Editing existing page setups works find, only the "new" setups are a problem.
AutoCAD 2013 (G.114.0.0 SP 1.1), Windows 7.
Also, AutoCAD internal crash reporter is not called. Goes direct to Win 7, "Application has stop working" dialog.
View 4 Replies
View Related
Aug 12, 2013
System Autocad 2013 on PC 32bit
Our company as a .ctb file that has been in use for some time. I have upgraded to 2013 and now...
When I open up old files that contain sheets and page setup.
If I attempt to "Modify" or "Create New" Page setup "Page Setup Manager" goes into lock down and freezes everything.
I am unable to change the setup to re-assign the proper .ctb.
I checked with a new document and I am able to access and use the right .ctb.
This is duplicated on everyone of the machines in our office that has 2013 running on PC.
The one machine with Autocad for Mac 2013 works just fine.
right now we out of four computer, we only have one computer running 2008 that do any printing or PDF'ing.
I tried changing the .CTB to an .STB, with no success. Changing the color space does not appear to work.
Is there a problem with my .ctb file that makes it not compatible with 2013?
View 5 Replies
View Related
Nov 16, 2012
Is their a way to create a spot elevation in AutoCAD LT 2013?
View 1 Replies
View Related
Oct 17, 2012
There is a coworker of mine that seems to have an issue pop up in random files here. He is drawing his siteplan on a file received from a consultant, the issue he's having is that if a line has any sort of elevation to it, he can't extend another line to it. He can flatten the line and then extend to it, but if the same issue is tried on any other machine, the rest of us can extend the line without issue regardless of it having elevation or not. The frustrating part is that he couldn't tell the line had any elevation to it until he took the precision value out to 8 digits. The line he couldn't extend to had an elevation of 0.00000004. But as I said, his machine is the only one that has this issue. We are all running AutoCAD 2013 on Windows 7 64 Bit. Is there a setting or variable somewhere controlling this behavior?
View 5 Replies
View Related
Nov 6, 2013
what I need to do to fix the elevation tag block below? I want the text to rotate and be readable as I rotate the block. Right now the text rotates but it's not readable when it's on the left hand side.
View 3 Replies
View Related
May 2, 2013
A user is having problems when using the copy command in AutoCAD 2013.
When they select objects, its not reporting on the commandline how many objects its found or keeping a running total of objects selected. Not even any duplications...
I've tested it on my machine but i cannot replicate the issue and have never come across this before!
Is it a bug? Is it a variable? User setting etc.
View 9 Replies
View Related
Feb 11, 2013
I'm trying to setup a title-block for everyone at my new place of business.
In this new job, 98% of our drawings are done in a single file with multiple layouts. I would like to set my template up so that things like Rev numbers and drawn by, and checked by etc., are updated in all layouts by changing just the first sheet. I also want to include a field for the drawn date so that it takes the current date (they want the drawn date to reflect the print date rather than the actual drawn date...)
I would like to incorporate attributes for things like checked by, engineer check, and such but make them so they don't appear unless you open the attribute editor.
View 9 Replies
View Related
Aug 23, 2012
In AutoCAD Architecture 2009, we had this awesome button that would basically "lock" the z-axis. This was very handy to move 3D objects around in the same plane.
Now in AutoCAD 2013, the button is no longer there! I found that you can make it a full-time change in the Options/Drafting tab, but we like to switch back and forth with this and that button was really handy.
I've also read that in older versions you could run the "AecProject.arx" file, but we don't have that in our AutoCAD 2013 folder (and I can't find it anywhere else on our hard drives.)
We do have AutoCAD Architecture 2013 but I was trying to only utilize what I needed rather than turn on Architecture every day.
View 1 Replies
View Related
Jun 25, 2013
Cannot find a way to set up angular dimensions to show that first zero if the minutes or seconds value is less than ten.
Desired: <degrees>08'05"
Stuck with: <degrees>8'5"
View 1 Replies
View Related
May 31, 2012
I am trying to plot a drawing on a tabloid sheet. I don't remember how to do so.Heres is what I have tried:
I went to "Page Setup Manager" in the options from right clicking on the Layout tab and then went to modify. From there I chose my Paper Size as "ANSI B (17x11 Inches). Then from the "What to plot" tab I chose extents and when I preview the print it doesn't incorporate the whole drawing, but only a portion of it. It does the same thing if I choose the other options (window, layout, etc...).
View 5 Replies
View Related
Sep 26, 2012
I made a lake using lines set at different elevations to show depth, is there a way to calculate the volume of the lake in AutoCAD 2013 from just the line elevations and area without having to make the lines a solid surface
View 2 Replies
View Related
Oct 13, 2012
The way I used to adjust feature lines was to highlight the node I wanted to adjust and then raise or lower that elevation incrementally until I got to a grade that worked.
Now I've noticed that when I highlight a node and hit the button to raise or lower, it forgets which node I had highlighted after the first press. This is a problem because now I either have to click on the node every time, because if I don't it will raise or lower the elevation of the entire feature line.
View 2 Replies
View Related
May 8, 2013
how to get 2013 C3D to create a large watershed with a big elevation drop? Arcview can do it, but I bought the new version of AutoCad, which meant a new computer, instead of the Arcview extension and I don't see it happening.
View 9 Replies
View Related
Jun 14, 2012
I went to content browser and loaded the "Plan Elevation Label" onto my tool palette when I go to place the label in the drawing it prompts for elevation and nothing else.
How can you change the rotation on the screen accept to use the rotation command?
The tag itself is referencing a block I went to the block and changed the block now if I go to insert the multi view block it prompts for rotation but not to edit the attribute is there any way to get it to do both?
View 1 Replies
View Related
Jun 7, 2013
In our drawing office we use Inventor in a mining materials handling environment. Our output is mainly structural drawings where we require a bill of materials as part of creating a drawing. Whenever I insert a BOM in the drawing environment I get this table which is labeled in a foreign language (it looks like an Eastern European language) and the format is not as per the standard Autodesk installation setup.
How do I either revert back to the standard setup or do a BOM setup from scratch?
We use IV 2013 Professional on Windows 7 64 bit.
View 1 Replies
View Related
Jul 11, 2013
I am trying to create an elevation label that will give me the spot elevation followed by the letters "TC" and then on the line below subtract 4 inches from the elevation followed by the letters "BC". It's easy enogh to add the letters but the simple equation of elevation - 4 inches eludes me.
View 3 Replies
View Related
Dec 19, 2012
When I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.
-changing osnapz variable
-latest civil 3d service pack
A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue
View 7 Replies
View Related
Apr 16, 2012
i have some existing drainage pipe and structures in a base plan that i need to change the invert (which is the easy part) and the top elevation to the existing top elevation that does not meet the minimum presect in civil 3d 2012 is there a way to change these min. to match my exisitng elevation for example i have a catch basin invert is 15.45 top is 17.56 with a 18" rcp the cover will be less than 12" and i need to change this.
View 3 Replies
View Related
Dec 30, 2013
A coworker believes an elevation tag can be placed in plan view A, but can be moved in plan view B without relocating it in plan view A. My experience...move an elevation tag in one view and it will be relocated in all views. Is there a way to have two different locations but reference the same elevation?
View 3 Replies
View Related
Feb 8, 2013
Is there a way to get into a 2012 Action setup via history in 2013?
View 3 Replies
View Related
May 6, 2013
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies
View Related
Nov 1, 2013
I'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
View 1 Replies
View Related
