Is there a system variable that controls being able to view a block during insertion? Currently I cannot see the block I am trying to insert on the cursor to see where I will be inserting it.
View 5 RepliesI working with a LISP program which creates some assembly drawings on the fly. For certain parts of the drawing I INSERT other dwg files which of course become blocks. Once in the drawing the users are sometimes wanting to edit the drawings where the blocks are, which makes an explodeable block necessary. But since the drawings are not actually blocks until they are imported this is not an easy thing to resolve. The other thing to keep in mind is that this drawing process is completely automated. The user does not get a chance to interface with it until the drawing is complete. So asking the user to do something as the drawing is being created will not work.
View 4 Replies View RelatedI have several script commands that insert items such as title blocks (xrefs) and page boundaries (blocks). The base point and INSBASE for all files are set to 0,0,0. However the blocks will occassionally come in at different positions. In some cases I can repeat the command multiple times and each time the same block will inset at a different position in the same drawing even though the insert point is set to 0,0,0.
Autocad LT 2012
I have a simple block, I would like to do the following:
Type: Insert
Specify: Block Name
Click spot with cursor to have the block placed
Rotate the block for orientation
I know that if I use the Tool Pallets I can specify rotate on insert, but do not always want to use the Pallete. I also know I can assign a rotation parameter to the block so I can grip and rotate after insertion. Is there an easier way?
Currently, I have the base or insertion point of some of my blocks in an undesirable spot and I would like to move it. When I insert a drawing or block I have difficulty in placement due to a poor choice in the drawing or block I am trying to insert.
View 6 Replies View RelatedI created a dynamic block with a polar stretch. I insert the block, then have to select the grip to rotate/stretch it. Can it be inserted and then rotated/stretched all in one action? The insertion point is at one of the line and the polar stretch grip is at the other end.
View 3 Replies View RelatedSo a file sent to us was created in AutoCAD Map 2007 and we run AutoCAD MEP 2012 (and some on 2011). A Device ID Block was inserted in the Map program at 1:40 Annotative scale and was fine in their software, but when we load the files the attributes are enlarged to 40x their intended size. There are over 1,000 of these block in the plans and I've run out of solutions. I tried overwriting the block and it failed, and I also tried copying the oversized blocks into a file with the block predefined and that failed as well. At this point I am convinced I need to find or write a lisp for the repeated actions. I am crunching on the process for writing the lisp as I have written macros and VBA Functions for excel and understand the basic principles.
View 1 Replies View RelatedI have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
would like to set a base point during insertion of one block.When not insert by AutoLISP, just type "b" to be able to change the base point.
But when I'm using an AutoLISP that inserts a block, it does not work, it interrupts the sequence of routine.
Lisp:
(defun c:carrobox()(setq #clayer (getvar "clayer")) (if (= unidades nil)(setq unidades "cm")).....
Where can I find the command to globally scale blocks by selecting them and it scales each block around its insertion point.
View 3 Replies View Relatedis there any way that Autocad can have multiple items placed on the clipboard for insertion use like the Microsoft Office Word programme has (up to 24 inputs). This would be a good feature to allow going to one file, copying what you need and then switching to your current drawing file and placing them as needed
View 6 Replies View Relatedhow (if) I can set up my dynamic blocks so that I can set the parameter values as I insert the block, rather than with the grips afterwards?
To take a simple example; I have a block consisting of a rectangle, with 2 linear stretch parameters - length, width. Can I set it up so that when I insert the block, it asks for the length and breadth,just as it would for attributes.
I have a block that contains attributes. When I select the block, you can see all the nodes/insert points from the attributes within the text. I was wondering if there is anyway to have the block only show the insertion point of the block and not the attributes? The attached image shows what I am talking about.
View 4 Replies View RelatedWhen editing multileader text, the insertion point changes. How do I stop this? I have several multileaders with their insertion points aligned together (left justified notes) but if I edit any text, the multileader jumps to a new position and is no longer aligned with the other notes.
View 9 Replies View RelatedI wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
Whenever I insert a title block I get an "AutoCAD Error Aborting" message - FATAL ERROR: Unhandled Access Violation Reading 0x0040 Exception at d69ac126h.
The title blocks have been working fine for months in ACAD2012, and I've even tried saving the drawing containing the blocks as an AutoCAD 2013 dwg to no effect.
The title blocks are 'home-made' and contain a mix of fields and attributes, could this be causing the problem?
When I select a block, all points contained in the block are shown. How do I turn this off? I want to select the block and have only the insertion point showing.
View 1 Replies View RelatedWhen I go to my paperspace layout tab to print my rendered surfaces all i see is the wireframes... Is it possible to view a Realistic Rendering in Layout Tab?
View 4 Replies View RelatedI have recently loaded Autocad 2013 and am having trouble with the text showing up in the Layer properties manager dialogue box, all information about the layers is whited out.
Is this a transparency setting?
I am unsure what to change/set to correct this so I can see layer informaion in the dialogue box.
Since AutoCAD 2013, I'm not able to use tracking when inserting block from tool palette. Example, I want to insert a door at 6 inches from a wall. I click the door from the tool palette, leave a tracking point at the wall corner, move the cursor in the right direction and type 6 follow by enter. The door is insert randomly in the drawing. It was working perfectly in previous release.
Actually I had to insert the door anywhere in the drawing and moving it at the right place and rotate it if required, it is very tedious.
I am having an issue seeing a 2line pipe drawn in MEP and viewing the drawing in AutoCAD vanilla. I can view the 2line pipe in it's original dwg file, but when I xref it into the base drawing the 2line pipe shows up as a 1line pipe in AutoCAD vanilla. I am using AutoCAD MEP AS AutoCAD which has all the enablers.
View 3 Replies View RelatedI received a file that has a large number of blocks with unnamed blocks inside. I need them all to be by layer, and i really don't want to explode it.
How can I can do it?
I need to start doing shaped glass drawings for our new glass supplier who insists everything is viewed from outside. Unfortunately all our drawings are viewed from inside and I don't want my team to be responsible for copying and flipping glass details in case they forget to flip one day.
I can obviously mirror the viewport view by clicking View/Views/Bottom but this is also mirroring any text dimensions, even though my Mirrtext preference is set to 0.
Is there a way to set a dimension style where the text is automatically back to front so it will then appear the right way round in that particular viewport. How to get round this problem without duplicating parts that can then get missed at a later date and not amended?
This needs to work in both AutoCAD 2014 and AutoCAD LT 2014 as we run a mixture in our office.
We recently updated all of our software at my company from 2010 architectural desktop to 2013 autocad. We do a lot of architectural work where we use the "wall" functions to draw our floorplans. I have noticed that the walls are disappearing on some files and not on others. Or we will only be able to see the outside line of the wall, but not the interior, which results in an undesirable appearance to the floorplans.
I have also run across these error messages when opening the files, I dont know if they are related or not:
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address E43AA180h"
and
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address D41218AEh"
I got this big file of a map, and, when I paste the different pieces of the map, some of them are invisible. I already erased all the scale stil but it doesn't work. The files are there but i can't see them, i think there's something wrong with the blocks.
View 8 Replies View Relatedsome attributes you can double click and edit within the dialogue box, others you have to double click and they are greyed out in the box, you have to click the little button with ... on and edit in place on screen... why?
whats the difference between the block atributes? attached is an example...
I am inserting some mechanical changes into my master drawing (updating my as built drawing). I copy with base point the hvac changes, I paste into the master drawing and all is cool; the block looks fine. When I explode the block, the text and some hvac blocks (like elbows with attribute) are way out off scale, like way bigger than they should be.I don't get it.
View 9 Replies View RelatedWe are currently moving from 2009 to 2013 and have a variety of drop down menus and palettes. I want to promote the use of the ribbon menus and new set up.
What is the best way to set up the block libraries? Could I just use the Design Center references block drawings?
Is it easy to convert existing palettes / menus to the new format?
I am confused how the blocks work in AutoCAD 2013. I previously had 2004 and had an add on called ARCH T. This add on had an entire library of blocks. Although, the new version of Arch T that I would need to buy is $1000... so I'm trying to avoid that. I know you can insert blocks from within AutoCAD. But the process confuses me. In the design center, it seems like I just need to go to a drawing file and it pulls up blocks that are already within that file. But its not necessarily all of them. Is there a way to get all the blocks in one file to pull from? How does this work??
View 6 Replies View RelatedWhen I type in the command "SC" for scaling the object, it'll asks me to specify base point then I can enter what scale I want it to be, such as 2 times or 0.5 for half sacle.
with the new 2013 version, sometimes it'll exit the command if I select the insertion point of the block or if the object is at the 0,0,0 location of the drawing. it'll also give a message of "the scaling factor is too small". But I haven't enter what scale I want to scale the object yet.
When exporting from AutoCad to pdf, from paper space, my blocks come out looking strange. I was having the same problem with text but fixed that by converting to Arial. I am exporting to an Arch E size. I have found that when I am zoomed out to show my entire campus, this is when I my problem occurs. When I am zoomed in to show a specific area, export is fine.
Using AutoCad 2014. Files saved back to version 2010.