Revit :: Mirror Project Is Hanging At 29% Architecture 2013
Jan 26, 2014
I am using Autodesk Revit Architecture 2013. I am using mirror project from the manage pulldown under position. I have used this tool many times in the past with success. This particular home is an average size two story. The file is about 40Mb. I tried flipping the home and Revit gets to about 29% and stopps. I let it run for an hour over lunch, even over night and no luck. I tried the same house on another computer running Autodesk Revit Arch. 2013 and it did the same thing.
I tried purging the file, I made sure nothing was locked, I even got rid of my grouped items. I tried copying the plan into another "fresh" file with nothing extra (like title blocks or other families).
I do have some floor framing shown in this plan. I used structural 2x10s to produce the framing (I did try getting rid of the framing and it didnt work). I tried turning off the roof lines (it has about three reverse gables) and nothing.
View 8 Replies
ADVERTISEMENT
Sep 18, 2013
In ACA 2011 I have the project browser icon. This is easy to find and use in the 2011 quick access toolbar.
When I open the "Customize user interface" I find and select "Project Browser", then I see under the properties of the command I only see "Display" and "Advanced" nothing else is listed. This command is quite odd compared to other commands.
However, in ACA 2013 this icon is completely missing, I cannot find it in the quick access toolbar, when I search in the "Customize user interface" command list, I cannot find "Project Browser" in the search field of the command list.
How do I find the command for project browser so that I can drag it / steal it from another .cuix file?
Bonus Question: How do I stop the sheet set manager from always showing up? I use the sheets tab of the project navigator all the time.
View 4 Replies
View Related
Aug 30, 2012
When creating custom materials and utilizing them within your Revit project, are the image files embedded within the RVT file and thereby increasing file size? I was needing to know before we load down the project file (.rvt) with many custom materials. Hopefully it is just a pointer to a separate material file.
View 1 Replies
View Related
Apr 21, 2011
My ACAD hangs when I try to open/save. I've reinstalled the computer with only Op + ACAD. The second a explorer window opens, ACAD hangs. Tried different install options for 3 days now.
View 9 Replies
View Related
Jul 22, 2013
Not sure what to categorize this as, throw it under another 2013 oddity.
We have a project that has some filled regions causing graphics issues. What happens is the plan elements around a filled region are being transposed onto the filled region causing a "ghosting" affect on the filled region. See attachment.
It is happening in both Arch and MEP and I've tested it with update 2 and update 3 installed. No changes with an audit either.
View 5 Replies
View Related
Jan 16, 2013
how can i open the project browser and properties box in revit 2013. they just disappeared.
View 3 Replies
View Related
Nov 1, 2011
I have got a split level building with hanging light fixtures in a double height room. The cable is connected to the double height ceiling, but the fixture itself hangs right down to below the split level used in another part of the building. I have set the light fixtures level to higher level, reduced the hanging distance right down, tried change the host, but they still hang below the split level line.
The fixture is the Rectangular Hanging Light Fixture from [URL] ... And the drawing is in millimetres.
View 1 Replies
View Related
Dec 6, 2011
I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies
View Related
Mar 9, 2013
I am using AutoCAD 2013. During the creation of 3D while I am using Presspull Command, it works fine in the beginning after some time, AutoCAD seems to be hang while I took the command but once I press Esc, AutoCAD continue working.
View 2 Replies
View Related
Dec 11, 2012
How to create dormer window in revit architecture 2013
View 1 Replies
View Related
Jul 5, 2012
I am having very frequent recoverable errors - havent seen any pattern but happens in veiws and mostly editing operations. I am filling in the error reports and there must be quite a collection now of mine.
View 4 Replies
View Related
Sep 9, 2011
I used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
View 1 Replies
View Related
Jul 17, 2013
I have to set up a project in Navigator so we can get started on it but I will have to go back and change the project number when we get it.
My question is how do I change the project no so that it re paths everything and reorganizes itself numerically in Windows Explorer...or should I just create a new project in Navigator and copy the files I need into the new project?
View 2 Replies
View Related
Apr 13, 2013
i used autocad 2010 and when i create a new block and rotate in that block text hhave been changed by cad.
is there any option to create block and never changed text when did mirror or rotate.
View 1 Replies
View Related
Jun 8, 2013
I am getting these white "ghost" boxes with every copy, move or mirror command. They can be individually deleted but that takes too long. The more there are the slower each command takes, to the point a copy can take over a minute. If I save and close then when I reopen they are gone -- until I execute a command. This is unique to a single file I recieved from a friend using a PC based Autocad; I use Autocad for Mac. I had no trouble with his file until I did a "Save As" and used it as a base for a new file. Now, every file that is a copy of it, even any file in which I x-ref it, has the same problem. All of my original, older files are fine. There is simply too much work in these (now) five files to start over. See attached.
View 3 Replies
View Related
Jan 6, 2014
still on this family quality control audit... i've come across some new and entertaining behavior.
several fmailies (face based) flip host sides with their flip controls as expected, but if i mirror them , instead of flipping along the mirror line as an accurate reflection, they ALSO flip top to bottom, AND around the face.
the right family in both views is the original, the left is the new mirror. (plan and elevation views in wire frame included) you can see it landed within the wall, and upsidedown.
View 7 Replies
View Related
Aug 17, 2013
How to keep notes not change position in mirror linked model?
View 1 Replies
View Related
Jun 15, 2011
Often when I attempt to insert a sheet list from the project navigator to a sheet, nothing happens. The sheet index will not insert. Why does this happen? Better yet, how can I fix it?
View 2 Replies
View Related
Apr 23, 2013
I want to mirror cut the models "selected" portion but it gives me result very far to it which is highlighted with red in the screenshot.
View 1 Replies
View Related
Jan 23, 2011
Im currently using Autocad Architecture, is it true that Autocad Architecture creates a bigger file size compared to Revit Architecture? Lets say that same structure and components are created.
View 3 Replies
View Related
Dec 26, 2012
I do not get why new Archicad Architecture has 3d modeling when Revit architecture already provided for it. What is the different between those two? I really want to know the difference. It bothers me somewhat about them.
View 4 Replies
View Related
Dec 11, 2011
Does it make sense to use PN for a residential project. This house is in a location that requieres the living space to be 36" above the garage level. In addition the LR ceiling is 18' higher than the other rooms. How shouuld I set up the levels in the construct tab of PN. I am thinking that the garage is level 0, and the other rooms other than LR would be level 1 and the LR to be level2. Or is it that the whole house is one level with 3 divisions?
View 2 Replies
View Related
Mar 14, 2013
I'm using ACA 2013. I am using sheet sets and I am working on my Sheet Template.Typcially we use a 3 line project title in our standard title block and I would like to continue doing so . The problem is that the Project Data only has one line for the "Project Name".
How can I get the project name to be 3 lines that separate when I want them to, I.E.
NEW MEDCIAL OFFICE BUILDING
FOR
MY LOCAL HOSPITAL SYSTEM
Is this a change in the "Project Name" field in the sheet template?
View 1 Replies
View Related
Sep 30, 2011
i"m trying to use architecture 201. I'm getting booted out of the software when I try to select a file using Project Navigator. as soon as I hover over the file name it kicks me out.
INTERNAL ERROR: !dbobji.cpp@7316: eNotOpenForWrite
Using windows 7 currently but it happened with xp pro also
View 1 Replies
View Related
Jan 25, 2012
I would like to copy a sheet from one project to another. Nothing changes from one to the other. Much like copying a view, I would like to copy a sheet. Is this possible and how?
View 3 Replies
View Related
May 13, 2013
What is the correct procedure to set up units in a project. I want to work with meters, ant the metric template is in milimeters. if I change the mm in m, when I make views the callouts are displayed incorrectly.
View 1 Replies
View Related
Jun 6, 2012
how to transfer text (cover sheet) from one project to another. I opened legend and then put it on a sheet then went to transfer it to the next project and it wont except it.I will need the cover sheet for every project.
View 6 Replies
View Related
Aug 12, 2013
Had file "weirdness" when users place "odd" characters in filenames?For example, I have several users that use the ampersand sign in the file name as in: FF&E HT.dwg.
I'm wondering if this causes an issue with the corresponding XML file since the ampersand is kind of a special character.
These users were able to open different versions of the "same" file at various points in its generation. One was the current version, another was several days old and the third version was a month or so old. Each time the file was opened (on the same day and time), the users did not get a warning stating the file was already opened and they both opened the file from Project Navigator.
We are currently running AutoCAD Architecture 2011.
View 2 Replies
View Related
Jun 12, 2013
Is it possible to include an existing drawing into a new project I created so it shows up in the project navigator?
I'm running ACA 2011.
View 1 Replies
View Related
Dec 7, 2012
There is a way to detect is a project is loaded using PSD VB code?
View 9 Replies
View Related
Dec 27, 2012
I am new to the project navigator, I have several projects I would like to move to another computer and I am not sure how to do this. I have searched but must not have used the right words in the search. What is the correct way to move or export these project and import them into the other PC?
View 2 Replies
View Related
