AutoCAD Architecture :: White Ghost Boxes With Copy / Move Or Mirror Command

Jun 8, 2013

I am getting these white "ghost" boxes with every copy, move or mirror command. They can be individually deleted but that takes too long. The more there are the slower each command takes, to the point a copy can take over a minute. If I save and close then when I reopen they are gone -- until I execute a command. This is unique to a single file I recieved  from a friend using a PC based Autocad; I use Autocad for Mac. I had no trouble with his file until I did a "Save As" and used it as a base for a new file. Now, every file that is a copy of it, even any file in which I x-ref it, has the same problem. All of my original, older files are fine. There is simply too much work in these (now) five files to start over. See attached.

View 3 Replies


ADVERTISEMENT

AutoCAD Inventor :: Copy Colors Of Surfaces With Mirror / Array Command?

Oct 30, 2013

I have an ipart I'd like to create w/ surfaces.  The surface color is important because we use that as plate thickness ID in FEA.  When I color a surface blue, then another red I continually get the default color when using the mirror or array command.  We're creating a customizeable ipart where there will be some intelligence surrounding how big the array (we may need 3, 4, or 5 beams based on the unit size).  I need a way that the colors on the surface propogate to the new surfaces created by the commands.

View 1 Replies View Related

AutoCAD 2013 :: Copy And Move Command But Not With Copy With Base Point

Apr 21, 2013

I have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).

The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)

Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.

How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.

This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.

I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD. 

About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).

View 4 Replies View Related

AutoCAD .NET :: Basic Move Or Copy Command With Drag

Jan 13, 2011

get any further with VB.net I'm trying to (re)create some autocad commands (and a own features, eventually).

I'm trying a move command now.A recreation of the Autocad command.

The selection of object works. Moving the set between two points works. The only thing thats too advanced for me is the drag posibility VB offers.

View 9 Replies View Related

AutoCAD Architecture :: Autosave Ghost Folder In 2012 For Mac?

Aug 5, 2012

I don't consider myself a minimalist in any way, but I like to keep my personal folders clean of any system files. I recently changed the path for the autosave-folder as it intruded my private work files. The problem is that even though I did change the path, every time I start AutoCAD a new 'Autodesk'-folder is created in my personal folder. It still contains the sub-level 'Autosave'.

View 1 Replies View Related

AutoCad :: Optimize The Mirror Command

Dec 2, 2011

I use often the Mirror command and I want to optimize that. To end the Mirror command,you have to choose if you want to erase the source objects.

Usually,I don't want to erase the source objects so,this dialog it seems to be useless. What is the macro command that disable this dialog?

View 2 Replies View Related

AutoCAD 2010 :: Freezes With Copy Or Mirror Commands

Jul 5, 2011

Just got AutoCad 2012.  Commands like Mirror and Copy which involve duplication (no problem with Move or Rotate, for example) will cause AutoCad to not respond for a few minutes. I believe it only is an issue with files brought forward from AutoCad 2000.

View 6 Replies View Related

AutoCAD Inventor :: Mirror Command Will Not Select Lofted Feature?

Jun 18, 2012

I select the mirror command, but it will not select the lofted feature. All of the extruded features will select just fine.

View 5 Replies View Related

AutoCad 2D :: Get Rid Of Little White Pop Up Boxes?

Dec 11, 2011

I x them out and they just keep coming back. i don't even know what they are called so i can't figure out how to turn them off.

Screen Shot 2011-12-11 at 2.09.01 PM.jpg

View 5 Replies View Related

AutoCAD Architecture :: Turn Off Ghost Text That Appears When Select Text?

Aug 14, 2007

Any way to turn off the ghost text that appears when you select text that is annotative, not get rid of it just not show all of the other scales for clarity.

View 6 Replies View Related

AutoCAD 2010 :: Mirror Command Default Erase Source Object Set To Yes

Oct 22, 2012

I'm trying to change the dafault varible for the mirror command from no to yes. whne you do the mirror command after you choose your second point it asks if you want to erase the source object and the default is set to no but I would like to change it to yes. I'm able to change the macro for the mirror button which works but only when I push the button. Before the cui file I remember everything was done from the acad.pgp or the acad.mnu files but with the new CUI file i can't seem to locate wher to change the actual command and not just the macro for the mirror button.

View 6 Replies View Related

AutoCAD Inventor :: Command MIRROR To Create A Symmetric Component From Existing Ipt

May 17, 2012

When I use the command MIRROR to create a symmetric component from existing ipt there are two problems:

1. in the existing ipt dwg the dimensions were lost, when I update the dwg;

2. in the iam that contains the mirrored component the constraints were lost, when I update the dwg.

View 4 Replies View Related

AutoCAD 2013 :: Copy Command Terminates After Single Copy - No Multiple Copies

Jan 3, 2013

I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?

View 2 Replies View Related

AutoCAD Civil 3D :: COPY Command Won't Multiple Copy When Executed With ACAD.PGP Shortcut In 2011

Aug 3, 2011

I recently upgraded to Civil 3D 2011 from C3D2010. I have used the same ACAD.PGP file for years that includes the shortcut C for the COPY command. Up until C3D2011 this would always allow me to copy an entity multiple times, (the default when COPYMODE is set to 0).

I am running C3D2011 64bit on WIN 7 64bit OS. It happens with other commands too that use a dialog box normally, i.e. INSERT - it only brings up the command line version of it.

View 5 Replies View Related

AutoCAD 2013 :: White Boxes Around Aerials?

Sep 19, 2013

I am getting these white lines around my aerials that are turning black when i print them to PDF. I need my graphics guy to turn it into an exibit but these lines are getting in the way.

View 7 Replies View Related

AutoCad 3D :: 3DMIRROR Command To Mirror Magenta Box Along Zx Plane Defined By Middle Of Steel T-angle

Nov 13, 2013

Why can't I get the "3DMIRROR" command to mirror the magenta box along a zx-plane defined by the middle of the steel T-angle?

First, I use the ZX option, and after that fails to work, I try the 3-point option using a picked first point and two ortho-points to define a zx-plane.

Also, there's some randomness in the sense that some of the time the exact same series of steps will produce the correct result, but not this time, as the video below shows.

[URL]....

I'm also attaching the drawing in AutoCAD2010 format.

View 0 Replies View Related

AutoCAD Architecture :: Rename Dialog Boxes

Apr 22, 2012

How can I fix the following:

In AutoCad (I am working with ACA 2012) there are several dialog boxes e.g. the "rename" dialog box that always show up in the same (too small) size.

After renaming e.g. a block, the window closes and I have to repeat the command to rename another item.

I would like to size the window and keep the setting and would like to keep renaming things without getting interupted by automatical closeups of the window.

View 3 Replies View Related

AutoCAD Architecture :: Option To Create Block And Never Changed Text When Mirror Or Rotate

Apr 13, 2013

i used autocad 2010  and when i create a new block and rotate in that block text hhave been changed by cad.

 is there any option to create block and never changed text when did mirror or rotate.

View 1 Replies View Related

AutoCAD Architecture :: Pull Down Menus And Dialog Boxes

Mar 24, 2012

I have an eye problem Macular Dystrophy) that requires the CUI Menus and dialog boxes to be made larger. Changing the customizing windows fonts do not increase the size of anything. I am still using AutoCAD 14 through virtual XP but want to use Autodad 2011 and can't get it to change so I can read the CUI.

View 1 Replies View Related

AutoCad :: Plotted PDFs - Text Turning Into Little White Boxes?

Apr 23, 2013

Our company plotted some PDFs using Publish, DWG to PDF and all the text came out fine but when our customer views the text in Bluebeam some of it is replaced by little white squares. It also prints out on their end with the little squares.

Mystery_Squares.png

View 2 Replies View Related

Revit :: Mirror Command Flipping Families?

Jan 6, 2014

still on this family quality control audit... i've come across some new and entertaining behavior.
 
several fmailies (face based) flip host sides with their flip controls as expected, but if i mirror them , instead of flipping along the mirror line as an accurate reflection, they ALSO flip top to bottom, AND around the face.
 
the right family in both views is the original, the left is the new mirror. (plan and elevation views in wire frame included)  you can see it landed within the wall, and upsidedown. 

View 7 Replies View Related

AutoCAD Architecture :: Check Boxes For Project Properties Palette

Oct 3, 2013

Is there a way to have check boxes in the Project Properties to be able to turn on and off txt / stamps / etc. for all sheets in a project?  I am looking for something that is similarly down in Revit Title Blocks?

View 6 Replies View Related

AutoCad :: Drafting Floor Plans - White Angle Boxes Appearing

Jun 27, 2013

While drafting floor plans; lines, fillet, Radius, Snap lines, there are small white boxes showing there is an angle or radius. They are getting in the way of drafting, slowing down my program and genuinely annoying. Do you know how to prevent them from appearing? Also, and I believe related, there are blue boxes appearing on all my right angles for reasons beyond me. How can I also prevent these from appearing?

View 2 Replies View Related

Photoshop :: Properties Pop-up Boxes How To Move?

Aug 15, 2004

i change my screensetting from single laptop screen to extended screen (laptop+19") and back again on dayly basis.

the problem (which ONLY occours whit adobe products is
that when changeing my screen to laptop only the property boxes used fx; on layer/layer style/"blending options" appear (well they don't) outside the main window even though i placed them im my main window before changeing the screen setting.(from extended to normal).

most windows can be moved the the arrows or move function in the bottom bar, but how can i MOVE the pop-up property window and place it in the main (well, only) window ?

looking for a keyboard comb. to move the active window og a function
to place ALL windows i the main window...

i'm using PS 6.0

the "reset workspace" works fine on everything BUT the "Layer/layer style" -property boxes, and the whole prob. is that i only have 1 screen here at home.

View 3 Replies View Related

Illustrator :: Move Dialog - Option / Enter To COPY And Move Object

Dec 24, 2012

What happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator???  Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move.  Immensely useful for prepress work!

View 2 Replies View Related

Revit :: Mirror Project Is Hanging At 29% Architecture 2013

Jan 26, 2014

I am using Autodesk Revit Architecture 2013. I am using mirror project from the manage pulldown under position. I have used this tool many times in the past with success. This particular home is an average size two story. The file is about 40Mb. I tried flipping the home and Revit gets to about 29% and stopps. I let it run for an hour over lunch, even over night and no luck. I tried the same house on another computer running Autodesk Revit Arch. 2013 and it did the same thing.
 
I tried purging the file, I made sure nothing was locked, I even got rid of my grouped items. I tried copying the plan into another "fresh" file with nothing extra (like title blocks or other families).
 
I do have some floor framing shown in this plan. I used structural 2x10s to produce the framing (I did try getting rid of the framing and it didnt work). I tried turning off the roof lines (it has about three reverse gables) and nothing.

View 8 Replies View Related

CorelDRAW X6 :: White Boxes When Printed?

Jun 17, 2013

I have been having a problem with white boxes appearing in my drawing only when I go to print. I searched this problem before and found a solution but of course can't remember what it was and can't seem to find the solution again. Wished I'd saved the url. From what I remember, it was something to do with bitmap effects. For me the boxes are appearing where I have guassian blurs for others it's drop shadows. I know I can convert the whole drawing to bitmap but that changes the look of my graphic slightly and don't want to do that.

View 12 Replies View Related

3ds Max Modeling :: Random White Boxes In Rendering

May 2, 2011

I am having an issue with some product renderings I am doing. 3DS Max seems to be placing random (sometimes not random) white boxes in my renderings like missing info. I can reboot Max and they will shift the next time I render. The models are fairly simple polys with a PS Layered .

System: Windows 7 64, 12GB Ram, ATI Fire Pro v7800, Intel Xeon X5355 @ 2.66GHz

View 2 Replies View Related

AutoCAD Architecture :: Cannot Type In Mtext Boxes - UPPERCASE / Lowercase Buttons Make Text Disappear

Feb 16, 2012

Architecture 2009 running on Windows 7.  Dell Precision T5400 with a Quadro FX570 graphics card.

I have lately been having some issues with text in Architecture 2009. I first noticed that within Mtext, when you hit the "UPPERCASE" or "lowercase" buttons, the text disappears in the editor, and no changes are made.  Not the end of the world, but not handy.

Then it stopped letting me type in Mtext boxes at all. The return key seemed to work, but nothing else. Then it started converting text typed into Mtext boxes into (I think) Chinese characters. Really not handy. At this point I decided to try to reinstall. First I tried a repair, then reinstalled over the existing installation, then uninstalled completely and reinstalled from the disk.  I've also done a windows restore, though as this has slowly been falling apart, I'm not sure when I should restore back to.

I have Mtext basic functionality back, but the "UPPERCASE" and "lowercase" buttons still make the text disappear.

Not sure if it's related, but I also get a Fatal Error e06d7363h at 758bd36fh about 4 or 5 times a day.  Usually it's associated with the open command (ctrl+o), but sometimes it just happens at random.

View 1 Replies View Related

Photoshop Elements :: Cannot Move Text Boxes While In Middle Of A Project

May 24, 2013

For some reason, I suddenly cannot move my text boxes while in the middle of a project.  I get either the hand or arrow but I am not able to move it.

View 5 Replies View Related

Photoshop :: Mavericks And CC - Blank White Dialog Boxes?

Nov 16, 2013

On Mavericks.  I'm getting white blank dialog boxes in Photoshop CC. Doesn't happen right away. It lets me work for a limited time then I get the blank boxes and can only Force Quit.  I don't use Suitcase but I do have a Wacom. iMac.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved