AutoCAD Architecture :: CTB Missing After Upgrade
Jun 11, 2012We just upgrade ACA 2011 to ACA 2013 and our ctb is missing.
How/Where can we get our ctb and place them for ACA 2013?
ADVERTISEMENT
AutoCAD Architecture :: Upgrade Existing Computer To Run Renders On Autodesk?
Mar 27, 2012Im currently in my second year at architecture school and have recently been learning how to render and do simple animations on autodesk. Being a poor student and only having an existing home computer, how to update my system so I would be able to run some simple renders on my computer?
I have attached an image below of my system details. My computer doesnt have a graphics card and I know I need to get that sorted.
AutoCAD Architecture :: Upgrade 2011 To 2012 - Wall Cleanup
May 1, 2013We just upgraded from ACA 2011 to ACA2012 and we are getting some wall cleanup issues with foundations. some walls, the footings show while adjacent wall (same style) footing disappears.
also, when i copy a wall where the footing is missing, the new copied wall shows the footing. when i move a wall without a footing, the footing shows up.
Lightroom :: Missing Catalog After Upgrade?
Jan 26, 2013I just opened Lightroom and was prompted to do an upgrade (4.3) now my catalogs are all gone. How can I get them back?
View 2 Replies View RelatedLightroom :: Photos Missing After 3.5 To 3.6 Upgrade?
Dec 13, 2011I upgraded from 3.5 to 3.6 this morning and now 3/4 of my photo's show as gray boxes in the panel at the bottom of the screen. I click on the little question mark near the box and it tells me that the photo is missing. the box next to the question mark tells me the previos location and asks me if I want to locate it. This is new as of the upgrade. What should I do? This is happening with a couple thousand photographs.
View 5 Replies View RelatedIllustrator :: Stroke Weights Missing After Upgrade To CS5
Feb 20, 2012In Illustrator CS4, I could select a path, click into the stroke weight selector on the Control Bar, and be presented with 0.25, 0.5, 0.75, and then 1 - 40. From the keyboard I could use the up/down arrows to move among each of these options. I found this handy because 0.5px and 0.25px are the line weights I most often use.
Ever since I upgraded to Illustrator CS5, the sub- 1px options in this selector have disappeared.
I've edited the default graphic style, to no avail. And yes, I have unchecked everything I know of with regard to "snap to pixel grid". I doubt that would be the problem anyway, because I am able to type "0.25px" and get a 0.25px weighted line. Which is what I have been doing ever since the upgrade. But I am annoyed at having to do it this way and the thousands of microscopic frustrations over the months have gradually accumulated into an ulcer and a disturbing addiction to prescription dandruff shampoos.
Did Adobe remove this from CS5 for the hell of it, or am I missing something obvious?
Lightroom :: 4.3 Missing Images After Disk Upgrade?
Feb 3, 2013I plan on getting a larger storage device for my Mac to accomadate my growing image files. When I install this device, and transfer my images to it, will Lightroom show these images as "missing"? If so, how would I correct that.
View 2 Replies View RelatedPhotoshop :: Custom Device Profiles Missing After Upgrade To CS6
Jun 20, 2012I have custom profiles (created in ProfileMaker 5.0.10) for 9 Canon iPF5100/6100/8300 printers installed on my Mac OS X 10.6.8 MacPro. All worked fine using CS5 and CS5.5. They are Printer(X)-(Paper Type).After installing CS6 the Photoshop print dialogue Profile list doesn't show these profiles any more.
I've confirmed that the profiles are there and are working fine by running the CS5.5 versions of PS but they won't show up in the CS6 PS Print Profile menu. They also appear and work in the CS6 PS Soft Proofing dialogue.A question similar to this appeared in the PS CS6 beta forum, but was never answered.
Photoshop :: Upgrade To CS6 - Components Missing From Applications Directory
Nov 1, 2012The Upgrade to CS6 from CS5 will not open!!When I try to open I get the Message "Componets missing from applications directory. Please reinstall" I did five Times with the same results
View 2 Replies View RelatedCorelDRAW Graphics Suite X5 :: Many Of Fonts In Use Are Missing After Upgrade?
Apr 26, 2011I just upgraded to X5 (from X3). Many of the fonts that I have in my used are missing. I went through the Bit Stream Font Navigator and cannot located them there either. Many of my existing customer files require those fonts for use in their logos...etc. I also went to myfonts as indicated and did not see them there.
View 2 Replies View RelatedAutoCAD Architecture :: Refedit Window Missing
Sep 19, 2011AA 2012 - The REFEDIT window is missing, which means I cannot add a subtract objects while editing a block, I can save and close the block by Right Clicking menu, but the window is nowhere to be found!
Do I need to modify the CUI?
AutoCAD Architecture :: Missing Tabs In Ribbon?
Jun 13, 2011In AutoCAD Architecture 2011, some of the tabs are missing. One is the Insert tab. So I can not insert an xref.
how to regenerate the ribbon...if that is what I need to do.
AutoCAD Architecture :: Missing Export To Button
Feb 6, 2012My AutoCAD Architecture 2011 program is missing the button to export to an earlier version of AutoCAD. I have seen this button on other computers at our office. I need to export some drawings to earlier versions without having to bind exrefs and do a 'save as' earlier version.
How I can get this button back? Does it have anything to do with DWG Trueview?Here are two screen shots, one with the button, and one without.
AutoCAD Architecture :: Grips Missing From Images?
Jun 8, 2011After upgrading ACA2012 to Autodesk Building Design Suite (which still includes ACA20012)
The grips on images to resize them to a rectangle for example no longer appear.
The grips still appear on other entities such as lines, circles and rectangle still appear.
Driving me potty as it still works on the systems where this upgrade hasn’t been applied yet.
It’s not drawing specific as this happens on all previous drawings opened on the upgraded machines, but not on the none upgraded.
Using the scale function to reference points at the moment as a very much longer work around, but would like it back the way it was.
AutoCAD Architecture :: Full Saturation (missing)
Jul 3, 2012I am using ADT 2013, and I had my drawings printing fine, and was able to override layer colors and plot some xref's such as the floor plan ghosted so the electrical plan would show up better. Now it says that Full Saturation is missing. I can override the vp color in the layer properties manager, but when I go to plot preview the layer still remains colored.
View 4 Replies View RelatedAutoCAD Architecture :: Set Location Panel Missing?
Oct 6, 2013AutoCAD Architecture 2014 (Student License) The SET LOCATION panel is missing on the INSERT tab.
View 1 Replies View RelatedAutoCAD Architecture :: Missing AEC Objects In 2009?
Aug 13, 2008my OS is Vista 64bit. i was using ACA2008 SP1 without any problems about a year.i decided to uninstall it and start using ACA2009.i have uninstalled ACA2008, 3dsmax2008 and other autodesk apps and removed some folders 'autodesk' and 'autodesk shared' from vista system folders.i also delete 'autodesk' from registry (LocalMachine/Software & CurrentUser/Software).then i installed ACA2009 64bit without any problems. after install i start it and there wasn't any problems (but i do not use any AEC objects, so i don't know if they was working).next i installed 3dsmax2009 & sp1 for it. max worked OK.then i installed sp1 for ACA2009. instalation was OK... but when i start working on a project i realised that AEC objects (wall,door, etc.) dont work at all ACA2009 starts OK without any warning or something...it loads at startup AECarchBase (and other AEC related stuff) but when you are trying to use any of wall,door,window it does do nothing... for example when you select wall from tools pallete it shows command 'WallAdd' in command line and then wall command ends without any warning or something...it also doesn't work from command line or menu the strange thing is when i uninstall ACA2009 and install ACA2008 again problem was also now in ACA2008 !!!
View 9 Replies View RelatedAutoCAD Architecture :: Missing Swing Lines
Apr 27, 2012It appears to be an error with swing lines for double doors when an elevation or section view from an AEC model is generated. Only one out of the two door leafs shows swing lines in any event. Could this be a legacy error after the hotfix re: hidden line projection error on elevations and sections? I applied the AecCore.crx fix yesterday and then became aware of the problem with the swing lines.
View 2 Replies View RelatedAutoCAD Architecture :: Construct Missing On Sheets?
Apr 13, 2012I'm starting to set up Sheets from our template but none of the construct is transfering except for dimension lines. The views are drug in from Project Navigator. Elevations are fine, but when the viewport window is made larger the construct isn't there. I've attached an example of what is supposed to be the floor plan.
I've edited the walls but that made no difference. They are set to start at 0". Is there anything I haven't checked? I'm supposed to go to contract with these drawings next week.
AutoCAD Architecture :: Text Formatting Box Missing
Jan 22, 2013when I double click on a text, a text formatting dialog box use to appear, but now it does not.
View 2 Replies View RelatedAutoCAD Architecture :: 2D Section Linework Missing?
Jun 8, 2011I'm working with Architecture 2011 and when I draw a 2D section, the defining line is missing for the structural members cut by the section. The hatching displays fine but the line around the material isn't there.
Under the material definitions I've got the 2d section / elevation linework turned on and under the elevation style I've got the defining line turned on and set to by material.
The defining line will come on if I turn on the inner and outer shrinkwrap but then it's color is defined either by layer or by color in which case it's all the same color and i have to manually edit the linework to change the color.
AutoCad 2D :: Missing Properties Of Objects In Architecture
Apr 26, 2013I used architecture on my pc. I installed Autocad on another pc with the same Serial code. I can see on the top that my version suddenly is a Educational version. I'm telling you this because i don't know if this is the reason of my problem.
The problem: i can't see the properties of an object when i use autocad architecture in the educational version.
For example: I make a wall and i place a window in the wall. Now i want to change the width of my window, using the properties bar. SO i click on my window (right mouse button) and click on PROPERTIES. It opens the properties bar BUT i can't see the window and his properties. At the top of the properties bar it says "No selection".. How can this be when i begin with the right mouse click on my window?
When i do it in the other direction: Open properties (ctrl+1) first and then select for example my wall, still nothing changes in the properties bar!
AutoCAD Architecture :: Missing Menu Items
Dec 21, 2011Trying to setup my machine at home to match my machine at work. To clear things up, I'm running ACA 2009 on both machines, both are running XP Professional, although I'm running XP Professional at home through VMWare Fusion 4 on my MacBook Pro and I really doubt that could cause these issues since a coworker is having these issues at work on a PC.
First of all when I startup ACA 2009 almost everything is missing! When I go to profiles and load the imperial profile I get the wonderful ribbon, which I immediately use RIBBONCLOSE to turn off but then I don't have any file menus. I have the large A in the upper left corner but it only has File, Edit, and Exit I believe. So I used MENULOAD to get the ACAD.cui back up and then reinserted the install CD to add EXPRESSTOOLS back (...why aren't this included to start....that's for another time).
So now I have a something pretty close to my work machine after moving some properties, xref, and tool palettes around. I don't really use any buttons so it is a pretty minimalist desktop. Now down to the real question...
Where did the Project Browser and Style Managers disappear to? I know, I know, ending in a preposition...I can't think anymore today and Autodesk you are responsible. Is it just me or does Autodesk seem to be hiding more and more from us with each release every year? I can type ProjectBrowser into the command line and it will appear but it isn't under the File menu and more and I honestly couldn't find the Style Manager command prompt so I can't tell you if that works.
How do I get these two items to reappear, neither of the two buttons existing either in the standard ACAD.cui configuration next to Tool Palette, etc
Also, why don't the profiles work anymore? If I save it under profiles and reload it the next time everything is messed up nothing happens, and yes the shortcut I use to start ACA references that profile.
AutoCAD Architecture :: Missing Light Fixture Tags
Apr 26, 2012Am just starting to explore Revit and was trying to add some lights to my building to play with some renders. When I try and load anything from within the 'lighting fixtures' however, I am met with the message:
"There is no tag loaded for lighting fixtures, do you want to load one now?"
I have explored a number of other family types, walls, doors, windows, kitchen and bathroom etc and never had this message/error occur.
AutoCAD Architecture :: Linking And Extraction Panel Missing?
May 24, 2012Working with an excel spreadsheet and following ACA. Looking for datalink dialog box.
Ribbon: Insert tab>Linking & Extraction panel>data link.
Problem is that the Linking & Extraction panel is not available.
ACA2011
Win7 64
AutoCAD Architecture :: Object Properties Missing Some Parameters
Aug 22, 2013How can I restore my object properties dialog box in its default state? I'm recently working on a project when my Autocad Architecture 2013 just stopped working while it was saving. When i re-opened the file, I just noticed that the object properties doesn't show the full parameters of a certain object anymore. The width,height and other parameters in adding a wall is not included in the properties dialog box. Same scenario goes for all the objects, when i click on a dimension line or any line, an incomplete dialog box appears. Solutions that i've tried but nothing worked:
1. Changed User Profle Preferences
2. Changed my .CUIX in the customization file
3. Restart Autocad
4. Reset Autocad
5. Reinstalled Autocad
6. Downloaded and Installed Autocad Architecture 2013 service packs 1&2
I'm Using Autocad Architecture 2013 64 bit and OS windows 8 64 bit.
AutoCAD Architecture :: Annotation Visibility Button Missing?
Oct 1, 2013My annotation visibility button seems to be missing from the Drawing Status area (down in the lower right corner) when I am in model space. How do I get it back?
View 1 Replies View RelatedAutoCAD Architecture :: Missing Text Style Pull Down?
Sep 30, 2012I have ACA11 that we changed to classic on a computer.
We are missing the text style pulldown and dim style pulldowns.
Is there a code to get these back.
AutoCAD Architecture :: Detail Component Databases Are Missing?
Sep 18, 2012The AEC content folders are missing. Actually, it's not missing but autocad is not able to locate them.
C:ProgramDataAutodeskACA 2012enuAEC Content.
C:ProgramDataAutodeskACA 2013enuAEC Content.
Is there any problem or bugs with the "AecDtlComponents.mdb" file type
AutoCAD Architecture :: Command Aliases Abbreviations Missing?
Sep 13, 2011I like the new feature in 2012 where I can type a couple of letters at the Command Prompt and get several commands to pick from but I would like to have the command alias back (for me) such as typing E and the Erase command would be there. I went to Express Tools and loaded the acad.pgp file; typed RE-INIT at command prompt but there was not change. Closed the program and restarted and still no change. When I type E, the first command is EATTEDIT. I don't see any of the aliases abbreviations. How do I get these to show up?
View 2 Replies View RelatedAutoCAD Architecture :: Build Panel On Home Tab Is Missing
Apr 7, 2011I installed ACA 2011 on 6 computers. 5 of the 6 had aca 2008 and XP on them. The 6th was a new computer with windows 7 on it. We notice that the build panel on the Home tab is not there. How do I get it there?
View 7 Replies View Related