Illustrator :: Stroke Weights Missing After Upgrade To CS5
Feb 20, 2012
In Illustrator CS4, I could select a path, click into the stroke weight selector on the Control Bar, and be presented with 0.25, 0.5, 0.75, and then 1 - 40. From the keyboard I could use the up/down arrows to move among each of these options. I found this handy because 0.5px and 0.25px are the line weights I most often use.
Ever since I upgraded to Illustrator CS5, the sub- 1px options in this selector have disappeared.
I've edited the default graphic style, to no avail. And yes, I have unchecked everything I know of with regard to "snap to pixel grid". I doubt that would be the problem anyway, because I am able to type "0.25px" and get a 0.25px weighted line. Which is what I have been doing ever since the upgrade. But I am annoyed at having to do it this way and the thousands of microscopic frustrations over the months have gradually accumulated into an ulcer and a disturbing addiction to prescription dandruff shampoos.
Did Adobe remove this from CS5 for the hell of it, or am I missing something obvious?
View 6 Replies
ADVERTISEMENT
Mar 14, 2013
I have been using Illustrator for almost 10 years and have never run into this one. When enter a stroke weight on a line with a decimal point like .25 or 4.5 is keeps rounding the number up. For example I enter 0.75 and it makes it 1 point or I enter 5.5 and it makes it 6 point. Whether I enter the number manually or pick from the drop down (0.25, 0.5 or 0.75) it keeps rounding my strokes to even numbers.
View 2 Replies
View Related
Mar 24, 2013
I have created a path with multiple strokes, which differ in weight and color. I can save that as a profile but it's really tedious if I want to alter the different colors and stroke weights.
I can't seem to do record an action which will automatically alter those parameters (f.ex. raise each strokeweight by 10pt.). All I get is just an action that will recreate the altered state during recording (f.ex. stroke weights 20, 10 >--Action--> 15, 5). I cannot start the action and raise or lower my stroke weights at once based on the current parameters.
View 1 Replies
View Related
Mar 20, 2013
I'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) How to change this back?
View 3 Replies
View Related
Apr 28, 2013
I seem to be missing the stroke functions such a creating dash lines etc, I have the latest version of CS6 Illustrator but don't understand why its missing all I have is the stroke weight (see image below). At first I thought it was because of changed and the effect is no longer there but I read forums and it seems to be everywhere.
View 2 Replies
View Related
Feb 12, 2012
For some reason when I use my Paint Skin weights tool, the mesh does not go into a grey scale type shader. Instead, the textured model is still displayed instead of the black and doesn't display weight values in the greyscale I'm used to.
Did I mess up settings somewhere? I know I'm in Paint Skin Weights tool because I can see the bones when it goes into Xray. I can open other scene files and can view the weights just fine.
Note: I have tried the following fixes: copied the mesh into a new scene, made sure it wasn't a subdiv shape.
I am using Maya 2010
View 2 Replies
View Related
Aug 1, 2011
When i select my mesh and click paint weights i get this error:
// Error: file: D:/Program Files/Autodesk/Maya2012/scripts/others/skinClusterInflMenu.mel line 568: No object matches name: LeftLung.liw //
LeftLung is a joint and i figure liw is "Lock Influence Weights".
I can change settings in the tool and then go to paint and it is a red x through a red circle. When i click to paint it resets all settings in the tool and logs absolutely nothing to the script editor, even with Echo All Commands on.
This leads to the next problem, locking weights is doing nothing at all. Locking them by selecting the joint or using the component editor shows them as "on" but it does not actually lock in any way. Putting influence to any other joint will remove/change the influence on the locked joints.
View 9 Replies
View Related
Sep 12, 2013
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
View 1 Replies
View Related
Jun 11, 2012
We just upgrade ACA 2011 to ACA 2013 and our ctb is missing.
How/Where can we get our ctb and place them for ACA 2013?
View 2 Replies
View Related
Jan 26, 2013
I just opened Lightroom and was prompted to do an upgrade (4.3) now my catalogs are all gone. How can I get them back?
View 2 Replies
View Related
Dec 13, 2011
I upgraded from 3.5 to 3.6 this morning and now 3/4 of my photo's show as gray boxes in the panel at the bottom of the screen. I click on the little question mark near the box and it tells me that the photo is missing. the box next to the question mark tells me the previos location and asks me if I want to locate it. This is new as of the upgrade. What should I do? This is happening with a couple thousand photographs.
View 5 Replies
View Related
Jan 4, 2013
I have a shape with a black stroke and green fill. I have a white line segment over it. How do I get it so that the end of the line segment doesn't show over the black stroke of the object? If I try to put the line segment behind the object, then the object fill hides it completely.
I'm new to illustrator and I've tried to search for an answer but I don't know the best way to accomplish what I want to do. Seems like some combination of transparency or knockout groups and I've read a bit about this and can't figure out what I need to do.
View 3 Replies
View Related
Mar 24, 2014
I need an outline on a stroke that i drew but when i apply object>path>outline stroke i keep getting my initial stroke applied as well. I only need the outline, not the initial stroke. I use Illustrator CC.
View 4 Replies
View Related
Feb 3, 2013
I plan on getting a larger storage device for my Mac to accomadate my growing image files. When I install this device, and transfer my images to it, will Lightroom show these images as "missing"? If so, how would I correct that.
View 2 Replies
View Related
Jun 20, 2012
I have custom profiles (created in ProfileMaker 5.0.10) for 9 Canon iPF5100/6100/8300 printers installed on my Mac OS X 10.6.8 MacPro. All worked fine using CS5 and CS5.5. They are Printer(X)-(Paper Type).After installing CS6 the Photoshop print dialogue Profile list doesn't show these profiles any more.
I've confirmed that the profiles are there and are working fine by running the CS5.5 versions of PS but they won't show up in the CS6 PS Print Profile menu. They also appear and work in the CS6 PS Soft Proofing dialogue.A question similar to this appeared in the PS CS6 beta forum, but was never answered.
View 3 Replies
View Related
Nov 1, 2012
The Upgrade to CS6 from CS5 will not open!!When I try to open I get the Message "Componets missing from applications directory. Please reinstall" I did five Times with the same results
View 2 Replies
View Related
Apr 26, 2011
I just upgraded to X5 (from X3). Many of the fonts that I have in my used are missing. I went through the Bit Stream Font Navigator and cannot located them there either. Many of my existing customer files require those fonts for use in their logos...etc. I also went to myfonts as indicated and did not see them there.
View 2 Replies
View Related
Feb 1, 2013
I'm primarily an illustrator user, but my office has several people with ISOdraw backgrounds. Part of our job is making line drawings with just a couple of different line weights, and apparently in ISOdraw you can set two line weights and quickly toggle between them while you're working somehow, and the lack of something similar in illustrator frustrates them. To make things easier for me i made a little graphic style library with the relevant line weights in it so i can click between them, which works fine for me, but in ISOdraw it's supposedly more intuitive somehow and they want to know if there is any way of doing something comparable, but I'm at a loss as to what else we could do. Maybe there's a keyboard shortcut for switching graphic styles, or some other shortcut i never noticed?
View 5 Replies
View Related
Jul 25, 2013
I can't find the "stroke" effect in After Effects CC. Is it gone? how to get it back?
View 2 Replies
View Related
Apr 9, 2013
I'm trying to figure out a way to automate a simple, yet repetative process I do countless times a day. Ideally, I'd like to tie it to a keystroke to speed up my workflow.
I work on line art and colorways for footwear, so the way I'm coloring these shapes and strokes break apart the different materials and pieces of the shoe.
While coloring line art, I work with Pantone spot colors as fills for closed path objects. I then have to manually apply that same color to the stroke, set the stroke to 0.5px weight, convert that spot stroke color to CMYK, and add 15% to the K value.
I found some code in an older post for applying the actively selected object's fill color to the stroke, but I'm having but I'm having trouble with the next step of figuring out how to take that spot stroke color and convert it to a CMYK build that I can then add 15% black to. Is this something that's even possible? I've spent about an hour playing with the script and have only had luck matching the fill color or turning the stroke white.
View 13 Replies
View Related
Mar 20, 2014
When I draw a character, i cannot change line weight of fill shapes. When I do so it remains unchanged, however once I export everything is fine and okay.
This image below is how it looks. Even though it is colored.
Once I export I get this
View 1 Replies
View Related
Aug 2, 2013
I have an image that has a black stroke around it. I'm wanting to make that transparent and add a stroke to the outside of the black stroke, so it will basically be an invisible space there. Is that possible or is there an easier way?
View 1 Replies
View Related
Nov 18, 2013
After upgraded to Mac OSX 10.9 (Mavericks), I can't using Chinese (Cangjie & Sucheng) input in AI Creative Cloud, however English and Japanese input are working.
I have tried it in Photoshop CC and Indesign CC, they are no problem at all.
View 6 Replies
View Related
Jun 7, 2013
I recently upgraded my Mac OS to 10.7.5 from 10.7.4. I also upgraded Java from SE6 to 7. Now my cs4 design suite will not open. I click on the Illustrator alias but nothing happens. I get the Rainbow Pinwheel that spins for 2 seconds and then stops. This also happens when I try using Photoshop, InDesign, and Dreamweaver. I've also tried opening using the .app file in the applications folder, but the same thing happens.
A side note: I tried to revert back to Java 6 with no luck. and I do not have a back up of my OS to revert back to 10.7.4. Everything was working great prior to the upgrades.
View 2 Replies
View Related
Jan 20, 2014
I just did the latest CC upgrade and my Illustrator keeps crashing. I use Astute graphics, so figured it may have to do with the plug-ins, but after Iremoved them from the plug-ins folder the issue persists.
View 2 Replies
View Related
Jan 29, 2014
I'm having a huge problem with the brush stroke, I use illustrator CS5,(on PC) but I can't set the stroke weight smaller or bigger than 1 pt.
1. I've already resetted AI preferences. still nothing.
2. I've already created new documents of all types ''web'', ''print'', ''basic rgb'', etc. and turned on and off the ''align new objects to pixel grid''. ( still nothing).
3. I've resetted my preferences file, under Unit/Stoke ( set to pixels instead of points). still nothing
4. I've already went to the Regional and Language Options and changed the decimal symbol but nothing.
View 3 Replies
View Related
Aug 23, 2013
I can't set the stroke of a path to anything less than 1 pt.
Though a dragged path (by an endpoint) snaps to a point on another path, when I lift my finger, the dragged point and path jump a small distance away.
Aligning two separate paths to their common (e.g. top left) endpoints also leaves the two endpoints slightly displaced from each other.
View 6 Replies
View Related
Mar 2, 2012
How do i do a stroke with a fadeout?
View 9 Replies
View Related
Jan 27, 2014
Just started working in Illustrator CC. I can't find the control to set stroke color.
View 2 Replies
View Related
Jun 4, 2010
All i want is to set a stroke width of 0.25 pt. When i select it, it just goes back to 1 pt. What gives????
View 6 Replies
View Related
Jul 22, 2013
In all my research of the new CC features in Illustrator I came across a video that was explaining you can now add a stroke on a placed image. My memory thinks it was a Deke McClellan video but i'm getting too old to rely on my memory being correct and I can't seem to find the video again.
I tried adding a stroke but nothing happeneds.. I still have to mask first then add a stroke.
View 6 Replies
View Related
