I installed ACA 2011 on 6 computers. 5 of the 6 had aca 2008 and XP on them. The 6th was a new computer with windows 7 on it. We notice that the build panel on the Home tab is not there. How do I get it there?
View 7 RepliesMy AutoCAD Architecture 2012 system was acting funny so I reset it and lost my build panel under the home tab. I tried to right click and select it in the tool bar but it was no longer there. How do I get this tab back?
View 1 Replies View RelatedI have autocad 2012 and am diving into 3d modeling. I realized the build panel is missing from my home tab. how I can get it to show?
View 5 Replies View RelatedI am working with autocad architecture 2011 for magicad. After some days a built panel under home tab missing. I check through CUI , ribbon and expanded home 2d/3d panel. I cannot get(see) build panel. how can I get the lost build panel.
View 1 Replies View RelatedAutoCAD Architecture 2014 (Student License) The SET LOCATION panel is missing on the INSERT tab.
View 1 Replies View RelatedWorking with an excel spreadsheet and following ACA. Looking for datalink dialog box.
Ribbon: Insert tab>Linking & Extraction panel>data link.
Problem is that the Linking & Extraction panel is not available.
ACA2011
Win7 64
So, I have been learning how to customize the CUI. I have gotten as far as adding and arranging commands on the existing panels. Next, I added a new panel and added commands to the new panel. Then I dragged and dropped it onto the Home tab. But no new panel. I seem to have missed a step in getting the new panel recognized as being on the Home tab.
So, once you have created a new panel, is there a command in the CUI to activate the new panel?
I'd like to locate the PROPERTIES button in the Home Panel instead of, or in addition to, the View Panel. When I go into CUI, it won't let me move/copy it.
View 1 Replies View Relatedin 2012 I had group in the ribbon home tab...how do I get it in 2013? 2013 Civil 3D
View 6 Replies View RelatedI am trying to build a curtain wall panel family (see attached). I want the extremities of the solids to be glued to the surrounding frame. I want to be able to scale the model inside the frame with different curtain wall panel system sizes. 5'x4', 6'x8' etc... I am having problems with restricted constraints. I do not know what I am doing wrong. the model inside the panel are created from soild extrusions. if I align the solid extrusion from one side of the frame , only that side will grow or shrink with frame, and makes the model look weird. I tried to group the solids with reference lines in them glued to the reference line grid i created in the panel and that did not work. I want to be to scale proportionally the model inside the panel.
View 6 Replies View RelatedI am using the the tool palette to build exterior walls.. I have the wall as needed finished except for a limestine sill. It is bull nosed and contoured. How do I put the profile in the wall style so it looks correct?
View 8 Replies View RelatedI am trying to build a spiral staircase and need to use spline to build the railings. Every time I try to end the spline by hitting enter the spline disappears. I am using 2014, and I have never had this problem before with previous versions.
View 8 Replies View Relatedwhere to find the build number of my Revit Architecture 2012-that is within the software I've installed. I know what the latest build number is. so want to check I have it.
View 2 Replies View Relatedcustomize my ribbon panel no longer works here thus my problem. We upgraded to 2013 and since I'm use to my 2011 ribbon the way it is ... I'm trying to customize it. How do you move a panel from one tab to another? I'm trying to move the dimenions panel from annoate to the home tab.
View 9 Replies View RelatedI have a number of custom Toolbars from ACA 2009 that I would like to convert to Panels in ACA 2010. I created a new Panel that is listed in the CUI but does not appear on the Ribbon anywhere. what windows to use in the CUI, and when to drag info from one to another.
View 3 Replies View RelatedIs there a way to add to the ribbon panel? I want to add a tool bar so it shows as a panel instead of a tool bar. I tried to customize it but I think I'm missing a step. I went to CUI and selected the default workspace, went to the toolbar area and added the toolbar to the ribbon panel. I then went the the right side of the CUI and hit customization, but there's nothing to select on either the right side or left side that would add the toolbar panel.
View 1 Replies View RelatedI'm using a disto laser with my tablet running "AutoCad Architecture". The laser can be set to fire using a combination of Alt, Shift or Control keys plus a number or letter. I arbitrarily set it up as "Alt 1". My old tablet had a mechanical button that I easily assigned this function. For my new setup, I need this button on the ribbon but I can't figure out what Macro text format is the same as pressing "Alt 1".
View 1 Replies View RelatedI'm using C3D 2013 on a 64 bit windows 7 machine. I have basejump loaded, and when I first installed it there would be a "Raster" tab in the ribbon that would allow me to resample, etc. That tab is now gone. How to get it back?
I used to click on a point to select it and a new tab would show up in the ribbon to list points, edit points, etc. That doesn't come up anymore either.
My co-worker is working on his first Inventor project and he opened up Inventor 11 this morning and both his panel and browser bar are no where to be seen - yet checked off in the options as visible? What is the problem and how do we fix it. He used it two days ago and everything was fine.
View 7 Replies View RelatedI was recently looking at the WikiHelp entry on AutoLimits, because it sounded useful but I haven't seen it before. However, upon checking, I noticed that I don't have the AutoLimits panel in my Inspect tab. Instead, I only have the Interference (buttons: Analyze Interference; Activate Contact Solver) and Measure (buttons: Distance, Angle, Loop, Area, Region Properties) panels.
I am running Autodesk Inventor Professional 2012, student edition, on a HP Pavilion dv2000, with 3GB RAM and an Intel Pentium Dual CPU (1.86GHz). My operating system is Windows 7 Professional 32-bit. I am an administrator.
I am a new user of AutoCad 2010 and am trying to access what used to be the detail component manager, but now I understand would be accessed through the Style and Display panel under the manage tab.
The problem is, I have no Style and Display panel
I have attached a screen shot showing the manage tab open and the CUI open showing the panel options expanded - which do not include the style and display panel- only the four panels currently installed under the Manage tab.
I've really hit a dead end and don't know where to look for the style and display panel so I can ultimately access the structural catalog.
I am looking to reach the Autodesk Seek function from the ribbon menu, but cannot find the Content Panel on the Insert Tab. I did a little poking around in the .cuix, through the cui customization command, but cannot even find it. Is there a way to download this, or has the feature been removed for ACAD 2013?
View 6 Replies View RelatedHow can I add the multileader panel onto my annotate tab on my ribbon?
View 4 Replies View RelatedI thought I had a grasp of the CUI routine, but apparently not. I copied the Image panel from the "Insert" Ribbon tab in Task-based Geospatial, and got it where I wanted. The commands are there, but the images are not - just the infamous cloud with "?". I can go back into Task-based Geospatial workspace and the icons are there, but I can't figure out where they are being referenced. Are they embedded here somehow? In the CUI under both the main .cuix list of ribbon panels and those for the partial workspace for TASKBASEDRIBBON, the button images are not linked to anything, just the cloud with "?" It seems that I need to be able to copy the Image panel from the right side window (when Task-based Geospatial is set to current) over to the main .
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
In looking for the design center in autocad 2011lt I discovered the content panel where it should be nested is missing in the insert tab on the ribbon
View 3 Replies View RelatedWhen initiating the hatch command H at the command line my panel changed to the hatch panel. Now the command opens the more traditional hatch dialog. I don't how it happened, but just when i was getting used to the panel.
When editing a hatched area the panel appears. Why when I stretch some hatched geometry does not the adjacent hatch stretch with it?
What's the best way to change the primary command on a ribbon panel? I want to set Pline as the primary command on the draw panel as it is currently line. I've managed to get it to work (sort off) but shouldn't it as simple as right click "set as primary command"?
View 4 Replies View RelatedI minimized then maximized Max and the panel was gone. hid and revealed in the roll-up...no go. Restarted...nopeLoaderd a maxstart file from Max 2011...no 32 bit Windows XP sp2 i7 Quadro 3500 4 gigs
View 3 Replies View RelatedFor some reason, every panel is now missing it's associated menu bar. I've tried doing research for a command to restore them using a MEL command, but to no avail. I did nothing to remove them in the first place.
View 4 Replies View RelatedEvery so often while i'm working in Revit the Ribbon/panel bottoms disappear. Even when toggling threw the options i can only get some of it to reappear. I attached what it looks like and when i toggle through the options.
View 1 Replies View Relatedim starting up illustrator, and the control panel (at the top) is missing. I tried restoring the essentials layout, restarting the program, and restarting the computer to no avail. the screen resolution is at the highest setting, and the control window is checked.
View 1 Replies View Related