AutoCAD Civil 3D :: Group In Home Tab Missing?
May 22, 2012in 2012 I had group in the ribbon home tab...how do I get it in 2013? 2013 Civil 3D
View 6 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Group Dialog Box Missing?
Jun 5, 2011I am running 2012 and my group dialog box is nowhere to be found. (I opened 2011 and the dialog box pops up)
I just get a command prompt to select objects or [Name/Description]: -group gets me command line as usual. I enter a lot of legal descriptions and set them as various named groups for boundary analysis. Selecting the various groups via dialog is much easier. I have checked system variables but I cannot find anything I need to change. I have searched the discussion groups also but could not find any info.
Civil 3D 2012
Win 7 64
i7-980x
24gb
quadro fx 1800
XEON E3-1270
32 GB RAM
Win 7 Pro 64
Civil 3D 2013
256 GB SSD
2TB HDD
nVidia Quadro NVS450
3 monitors
(all available hotfixes/updates applied)
AutoCAD Architecture :: Build Panel On Home Tab Is Missing
Apr 7, 2011I installed ACA 2011 on 6 computers. 5 of the 6 had aca 2008 and XP on them. The 6th was a new computer with windows 7 on it. We notice that the build panel on the Home tab is not there. How do I get it there?
View 7 Replies View RelatedAutoCAD Civil 3D :: Point Group For DTM
Aug 7, 2012I am having a problem getting all the points I want to include in my DTM into a Point Group. The raw description inclusion of most double codes, codes with line designators and codes with size and description modifiers does not bring the points into the point group. (e.g. WL S, CLF E, PIN 18 where the description key set is created to size the pine tree by 18 and create a descriptor that says 18Inch Pine).
View 1 Replies View RelatedAutoCAD Civil 3D :: Where Is The Group Command Located
Aug 29, 2013I have been looking all around Civil 3D 2013 for the "group" command and cannot find it anywhere! I had it in 2012 and previous versions (and added it to the quick bar).
View 3 Replies View RelatedAutoCAD Civil 3D :: Point Group Properties
Jan 3, 2013I know that there used to be a way in land desktop to change an entire point group to the same layer without having to do each point separately. How to do this in Civil 3d 2011?
View 3 Replies View RelatedAutoCAD Civil 3D :: UNDO Group Of Commands
Apr 29, 2013Civil 3D 2013 on Windows 7 64-bit:
Cannot use UNDO on command line because I have to enter the command many, many times to ever undo anything.
I therefore use the UNDO pull-down in the quick access toolbar; however, a few simple zooms and/or pans using the mouse wheel results in many, many (it seems like hundreds of them) "Group of Commands" items. I have to work my way back through (that is highlighting) many of these to ever get back far enough to undo something simple like an erase of an object. It works like this even if the erase (or whatever) was the last command issued--besides zooming and panning.
The mouse wheel zooming and panning seems to be what is adding all of the "group of commands" listings in the undo list. I must say this seems like a terrible bug in the software to me.
Combine zoom and pan IS checked under user preferences of options.
AutoCAD Civil 3D :: Point Group Creation
Nov 7, 2013When point groups are deleted through the UI and then recreated via code with the same name the criteria such as the excluded point number list is included. It would be nice if it started with a clean slate once created and not keep around deleted point group.
View 6 Replies View RelatedAutoCAD Civil 3D :: Point Group Properties
Apr 23, 2013I have a bunch of culvert points in my drawing and I would like to include all of the in the same point group. They all have CUL in the raw discription but some are CUL 0.3 INV, CUL 0.4 INV, etc, etc.
Is it possible to group all of these by just using the CUL somehow so that I don't miss any?
AutoCAD Civil 3D :: Set A Default Point Group?
Jan 20, 2012How do I set a Default Point Group? When creating points manually, I want them to automatically go into a certain/current point group, but since I don't know the point range prior to creating the points, I am having to continuously update the "include" points catergory. I can set the default/current layer, default point style, etc, can I do the same with point group? I understand about the "all points" group and the description keys that can be utilized in the other individual point groups to group information , but Is there a better way? Under the point creation toolbar, there is a point group template, but when I create a point group thru there, it doesn't do anything but create the point group. None of the newly created points go into that group.... what is the point of that option?
View 6 Replies View RelatedAutoCAD 2010 :: Group Selection Set Unable To Select Individual Elements Within Group
Mar 19, 2013One of my designers running 2012 AutoCAD and 2012 CADWorx, can no longer select individual parts of a GROUP by shift selecting the unwanted elements.
I have tried to modify..
Pickadd
Group
PickStyle
PickAuto
PickDrag
but to no success.
Also fiddled with her Options file, still nothing+
AutoCAD Civil 3D :: ViewFrame Group Dynamic Reference?
Jun 5, 2013Why would you Dref a Viewframe Group into another drawing?I wanted to cut P&P sheets (via layout tabs) in a new drawing. The sheets display fine, except that the plan view is an xref. I cannot move the matchline labels in the new P&P sheets because they are xref'd. Sure I could go to the parent drawing and move them, but that become tedious. I thought, why not Dref the viewframe group into the P&P sheet, that way I could move the matchline label to a new position. By new position I mean along the matchline itself, not to different stationing. It works but the sheet next and previous labels display #### (hashtags). The only workaround I can think of is to create the P&P sheets in the current drawing (parent), that way the matchlines would be live. I don't want to do that, I want just the alignment and profile of the P&P sheets I create to be dynamic, Xref everything else..
View 1 Replies View RelatedAutoCAD Civil 3D :: Add Sample Lines To Specific Group
Apr 11, 2008How or if you can add sample lines to a specified group? I created a group only to realize that there are some specific stations I need. I do not want to re-create the group and re-assign the materials nor reproduce my volume reports. I just want the section plotted on my sheets.
View 3 Replies View RelatedAutoCAD Civil 3D :: Renumber Points In Point Group
May 25, 2013Is there a way to renumber all the points in a point group? Right now I am doing each point individually but I have many points and it would be wonderful to learn how to do that automatically.
View 4 Replies View RelatedAutoCAD Civil 3D :: Any Way To Convert Group Of Lines To Polylines
Nov 1, 2012On several occasions I have had to convert a group of lines to polylines but had to select and convert each line one after the other. Instead of one after another is there a way or a command to select all the lines and convert them as group into polylines?
View 7 Replies View RelatedAutoCAD Civil 3D :: Section Label Group Edit?
Apr 29, 2012In the Multi-Section Creation tool i couldn't find a way to edit or remove Grid Break Labels ,aslo after creation i could Edit it each indvidual Section but not allover all Sections ?
How i can Editit ? also how ican do soin creation And why do i feel that the 2012 is Different from 2010 ?
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
AutoCAD Civil 3D :: Get Group Of 3D Polylines To Elevation Zero All At Same Time
Nov 12, 2012is there a way to get a group of 3d polylines to elevation zero all at the same time. a 300 foot long 3dpoly i have might have a couple hundred grips on it.
View 5 Replies View RelatedAutoCAD Civil 3D :: Section View Group Labeling?
Sep 5, 2013I have multiple alignments. When I create a section view group I would like a label at the top or bottom that is the alignment name. I cant find this option and I'm certain it exists!
View 6 Replies View RelatedAutoCAD Civil 3D :: Add Points To Surface Not In Point Group?
Mar 7, 2012Is it possible to add points to a surface without adding them to a point group? I've got a bunch of ponds I'm doing and it will save me some time if I could just select the points, and not have to put them in a point group then add the point group.
View 5 Replies View RelatedAutoCAD Civil 3D :: Add SectionView To Section View Group
Nov 7, 2012C3D 2012
Is it possible, in c# code, to add a sectionview to a section view group?
AutoCAD Civil 3D :: Point Group Include Exclude
Nov 14, 2013im trying to create a point group by including all points and then excluding the points i don't need. it doesnt seem to be removing anything from the group. i used to do this all the time in ldd. is it still possible in c3d?
View 2 Replies View RelatedAutoCAD Architecture :: 2010 / How To Explode Group When Group Name Not Found
Apr 15, 2013how to explode group when group name not found
View 1 Replies View RelatedAutoCAD Civil 3D :: 2014 - Point Group (NO DISPLAY) Does Not Appear To Be Included
Dec 20, 2013I just started work in Civil 3D 2014 and was going about creating different point groups for some volume calculations so I could create different surfaces. I noticed after creating my first point group that the NO DISPLAY group could not been seen in the Prospector under Point Group. Now in previous editions there has always been a NO Display Group so you can easily view your different groups. Is this something they changed in Civil 3D 2014 or was the installations faulty?
View 7 Replies View RelatedAutoCAD Civil 3D :: Project Point Group To Profile View?
Apr 12, 2012Project objects to profile view... got it. No problems selecting individual survey points or survey figures and projecting to profile view. Is there a way to project a entire point group to a profile. I have a point group created for the large number of points to be projected. Next I right click on the point group and click "select'. Then go to Project objects to profile view. Nothing...
This process works for the survey figures, but not the point groups! In prospector tab go to survey > figures then select CTRL + each figure to project then VIOLA' the whole group of figures are projected.
Is this limited to graphical selections only? If so, is there a workaround to generate a graphical selection set from the point group.
Using C3D 2010 on Win 32bit platform
AutoCAD Civil 3D :: Profile Data Band Label Group?
Apr 7, 2012So I've got a collection of the LabelGroupSubEntity in the ProfileDataBandLabelGroup. I need to replace some values inside them based on what Vertical Geometry Point they are labeling. Is there an easy way to determine what station value it is labeling?
View 2 Replies View RelatedAutoCAD Civil 3D :: Station Offset Report By Point Group?
Feb 2, 2012I am trying to use the Station Offset to Points report from the Reports manager. Currently, as far as I ca see, there is no way to select a group of points to include, either by point group or selection from the drawing. There is only "Select All' or "Deselect All". I want a report that will show the station, offset, raw or full description and elevation of a group of points related to an alignment/street. I don't see that option.
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Use Surface Contour Label Group Class
Nov 6, 2013How to use the Surface Contour Label Group class in the .NET API.
My first guess was that I had to create an instance object of the class and name it, and then use a "Create" method (e.g., CreateMultipleAtInterval) from there, like this:
Dim labelgroup As SurfaceContourLabelGroup
labelgroup.CreateMultipleAtInterval(arguments)
However, this doesn't work, as Visual Studio told me "Warning: Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated."
I tried just saying:
SurfaceContourLabelGroup.CreateMultipleAtInterval(arguments)
But that didn't seem to work either. How this class works and get it to add some contour labels to a drawing?
AutoCAD Civil 3D :: Lighting Up Grips When Selecting Point Group?
Oct 5, 2013when selecting a point group from the prospector tab, sometimes the point grips will light up and sometimes only the points will be only dashed.
Having the grips light up like that is very useful when viewing a region with many point groups.
How do I toggle this on and off?
AutoCAD Civil 3D :: 2013 Hundreds Of Group Commands In Undo?
Mar 14, 2013Is there a known problem with 2013 undo? I can be in a new drawing issue 2 commands and the undo drop down is populated with 100's of group commands, makinf Ctrl z useless
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
AutoCAD Civil 3D :: Point Group When Importing Survey Points?
May 23, 2013Sometimes when i import points Civil 3d creates a Point group in the drawing with the name of the point file, sometime it does not. I prefer when it does create this point group. It always seems to create a Survey Point Group. How do i control wether or not a point group is created in the import?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
AutoCAD Civil 3D :: How To Find Primary Point Group Using VLisp
Aug 30, 2013When I use the AutoCAD List command on a Civil 3d Point, one reported datum is Primary Point Group.
I want to get at that information with vlisp, but when I vlax-dump a point, there is no mention of Primary Point Group. If that's a limitation of using vlisp, let me know, and I won't chase it.
Maybe I have to go in through the point groups collection?