I am using AutoCAD 2013 and, out of nowhere, my keyboard aliases don’t work. Ex: When I type m for MOVE, I get MADD. When I type co for COPY, I get COLOR. If I turn off ‘Auto Append’, and try it, I get ‘UNKNOWN COMMAND’. I’m at a loss as to what to do. (I checked to see if I lost the acad.pgp file, but it’s still there.) how to get them back.
I like the new feature in 2012 where I can type a couple of letters at the Command Prompt and get several commands to pick from but I would like to have the command alias back (for me) such as typing E and the Erase command would be there. I went to Express Tools and loaded the acad.pgp file; typed RE-INIT at command prompt but there was not change. Closed the program and restarted and still no change. When I type E, the first command is EATTEDIT. I don't see any of the aliases abbreviations. How do I get these to show up?
I have Autocad Architecture 2012, and somehow after some manipulations with the interface the keyboard shortcuts ("L" for line, "M" for move, etc.) stopped working.
If I do a command such as regen, or switch between tabs/modelspace, generally anything that seems to involve a screen update, then immediately following that if I try something like a Shift-Tab type of operation, there is no response from autocad until I move the mouse. This is consistent if hardware accelertion is turned on or off, so I can't go blaming the video drivers just yet.
ACad, MEP, 3DS Max Windows 7x64 X5482 @3.2Ghz 8Gb Ram Quadro FX1700
recently I installed GIMP on my Lenovo S10-3t netbook running Gentoo Linux, and for some reason I haven't been able to get the keyboard working at all. I have tried resetting everything to default, and reinstalling GIMP, but to no avail.
This is my first post as I've been having a problem with my new Copy of CS2. I previously used PhotoShop 5 which had particular shortcuts which I have been using for years now but since purchasing CS2 I cannot use these shortcuts? I've explored the edit Shortcuts route but alas it doesn't let me change any of the shortcuts and some of them are not even listed. Code:
I notice that some of the shortcuts/hot keys don't work. For example, one basic hot key that does not work is the F7-key. The F7-key opens and closes the layers palette.
Another hot key that does not work is the spacebar. My teacher taught me to hold the spacebar down when you want to move the canvas around. When I am in handtool mode I hold the spacebar down, I then apply pressure on my laptops touchpad, I then slide my finger across my laptops touchpad in order to try and move the canvas, but the canvas does not budge.
Some shortcuts work. For example, tapping the F-key multiple times will expand and reduce the size of Photoshop.
Closing my web browser did not resolve the problem. Updating the software did not resolve the problem.
why lots of my shortcuts won't work or very little shortcuts are registered in my keyboard shortcut menu and when you use them they seem to be mixed up.
I'm having trouble with 2 problems in Photoshop CS. My first problem is that my keyboard shortcuts don't work, at all. They are turned on, but still do not work. Ive even tried setting my own, and those wont work either. Can anyone tell me how to fix that? Secondly, my brushes don't work. I have to set the brush to be over 100 just to see like a 5 pt line show up on the canvas. Ive tried everything!!!
My tool keyboard shortcuts work for switching from one tool to another, but not for toggling between that catagory of tool (for intstance: using "L" for toggling between lasso, polygonal lasso and magnetic lasson). how to fix this? (I use a Mac OSX, if that's relevant.)
I've noticed a strange bug with photoshop when working with a pen and tablet. I'm using the CC version on the latest Mac OS
While working on an illustration I'll frequently use keyboard shortcuts. command+z, i, r, z, option, etc. Someties after making a stroke with the brush tool, I'll go to undo with command+option+z and nothing will happen. Other keyboard shortcuts do the same thing—no response.
I'm using PS CS5 extended on two different systems and having the same problem. My right control key is often getting stuck on - even though the key is not physically stuck. Occasionally it also just seems to stop working, as does the right alt key. It only affects Photoshop, and I can fix it by quitting and restarting. This happens on a Vista 64 system and my Windows 7 laptop. They have two different keyboards, obviously, and I think two different drivers. I use custom keyboard shortcuts for a few things, but reverting to default did not seem to work that I could tell.
my keyboard acting up until I got the laptop and started having the problem there too.
I'm using win8 with photoshop cs5. Using english & hebrew languages. When using hebrew the keyboard shortcuts (exe: T for type, Ctrl+C, etc) doesnt work. everytime i need to change back to EN to use the keyboard. where can be the problem?
Why the texts that have the same "Textstyle" don’t change as the settings of the style change?
For example, suppose that particular texts have the T1 as text style. Then why if we change the value of “paper text height” of the T1 then the texts (that belong to this style) don’t respond?
At the same time, this behavior is valid pertaining the dimension style, i.e, if we change the text height of the dimension style then the dimension text responds and is changed!
I recently requested assistance to find French accent keyboard shortcuts. This I received, but I can't seem to get these shortcuts to work using the Type Tool on a document in CS6. Is there a particular setting that I need?
I am working with a PC. I have even tried using a built in font to ensure the problem was not that the font of choice not having the accents I was looking for.
since I updated my Mac OS to 10.9.2, my Adobe Premiere Pro CS6 has a problem: when I import MTS-files (AVCHD) from a Sony video camera, I get the video, but I don’t get the audio! That’s strange, because when I import other video formats like mp4, everything is fine, and I get video AND audio.
I also tried Premiere CC test version, but there’s the same problem.
Before my update I had Mac OS 10.6 and Premiere worked fine.
I’ve installed Revit 2014, but mainly using 2013. When I installed 2014, the button on the 2013 ribbon started acting funny.
When I select an element, a wall for instance, I don’t get the proper buttons under the MODIFY tab showing up. I have to hit the show/hide button on the drop-down menu that controls the visibility of the ribbon & buttons to get the EDIT PROFILE button.
And it doesn't end there; when I get into EDIT PROFILE mode, the proper buttons are not showing up again. Again, I have to do a show/hide with the drop down menu, and then the proper buttons show up and I can edit the wall.
If I then select another element, such as a roof, I have to go through the same two-extra-step process to edit the roof.
I just re-installed 2013 yesterday because I’ve been having issues with 2013 crashing on a daily basis, and then not opening at all. Yet the same problem still happens. I un-installed 2014, and the problem still happens. After I un-installed 2014, I did a repair on 2013, and the problem still persists.
I spoke to my Tech Support, CAD-1, this morning and they told me it’s possibly an issue with 2014 over writing some .NETFRAMEWORK files for 2013 (or something like that). They saw the problem on my system but couldn’t resolve the issue.
I’ve called Autodesk Tech Support, and of course the made a ticket and “will get back to me.” (I’ve not had much luck w/ Autodesk Tech Support in the past, and have a bad taste in my mouth because of it)
1. I prepared a 57 mm square, proportionally resized it to 58 mm and applied enter for the change but it remained as is i.e. 57 mm sq. Next I made the same changes through property bar, it worked. Through further experiments I observed it only make transformations through enter if we give x=val and move to y=val through tab and press enter. Or if we directly give new value to y and press enter. The property bar doesn't has this problem.
2. Transformations dockers problem of showing wrong position on y-axis. Screen shot attached.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key. This problem remains as is from v16.0.0.707.
4. Printing - EPS with CMYK / Native colour management shows graying problem on RIP. Facing it as a major problem.
Problems encountered even after resetting through pressing F8 at startup.
The same scene, same settings, produce 2 very different outputs in max 2011 and 2012, render to texture for normals is currently useless in max 2012.
The blue one is a correct tangent normal map created from a sphere in max 2011, the colored one is the the one created inside max 2012 from the same objects and settings, and the last is another sample of normals generated in max 2012.
I keep running into a situation where I would like to be able to create an edge or a work axis at the intersection of a work plane and the surface of the part. I figured out a work around if the surface is flat, but I haven't figured out a work around for a curved surface.
How do I create work axis where work plane intersects curved surface?
Or put another way: How do I project intersection of work plane and curved surface onto the work plane in a 2D sketch?
I need to be able to draw a 2D sketch on the work plane, but get a perfectly matching projected line onto the work plane, from the curved surface, at the intersection of the curved surface and the work plane.
The attached jpg shows the intersection in question. I circled it.
All of my block updates work just fine when I use them in MEP 12, but we have a couple of drafters working in vanilla AutoCAD & for some reason the same commands/ blocks/ settings (same exact file even) that work in MEP do not work in regular ACAD.
Now they do "work" - the commands/ block insertion - but the annotative adjustment (i.e. 1/4" to 1/8" to etc) do not work until I select the block and add the desired scale to its annotative object scale list - why is this necessary? it isn't in MEP? The blocks work/ act properly annotatively once inserted and adjusted as mentioned above, but again, why? Why? Why is this necessary? All of the scale are in the block file as it resides in my block folder...?
I installed AutoCAD LT 2013 on Friday. Everything was working fine until this morning. I found, as of this morning that my keyboard shortcuts don't work. eg 'l' to draw a line or 'e' to erase an object.
When I try to edit the acadlt.pgp file (Tools/customize/edit program parameters) I get the error message acadlt.pgp could not be found.
I read in another thread that after changed are made to that file the 'reinit' command should be run. on doing this i get the error message ' Dialogs are not available because DCL files are not loaded' .
My keyboard delete key has stopped functioning in autocad regardless of the .dwg file. Also my right click options when an object is selected is now exactly the same as if nothing were selected. I cannot double click to edit text nor double click to edit a table cell.