Revit :: Don’t Get Proper Buttons Under MODIFY Tab Showing Up
May 28, 2013
I’ve installed Revit 2014, but mainly using 2013. When I installed 2014, the button on the 2013 ribbon started acting funny.
When I select an element, a wall for instance, I don’t get the proper buttons under the MODIFY tab showing up. I have to hit the show/hide button on the drop-down menu that controls the visibility of the ribbon & buttons to get the EDIT PROFILE button.
And it doesn't end there; when I get into EDIT PROFILE mode, the proper buttons are not showing up again. Again, I have to do a show/hide with the drop down menu, and then the proper buttons show up and I can edit the wall.
If I then select another element, such as a roof, I have to go through the same two-extra-step process to edit the roof.
I just re-installed 2013 yesterday because I’ve been having issues with 2013 crashing on a daily basis, and then not opening at all. Yet the same problem still happens. I un-installed 2014, and the problem still happens. After I un-installed 2014, I did a repair on 2013, and the problem still persists.
I spoke to my Tech Support, CAD-1, this morning and they told me it’s possibly an issue with 2014 over writing some .NETFRAMEWORK files for 2013 (or something like that). They saw the problem on my system but couldn’t resolve the issue.
I’ve called Autodesk Tech Support, and of course the made a ticket and “will get back to me.” (I’ve not had much luck w/ Autodesk Tech Support in the past, and have a bad taste in my mouth because of it)
In AutoCAD LT 2013, the Modify box on the ribbon, I regularly use about four buttons in the main box on the ribbon and I use only the Lengthen button in the drop down box. Is there a way to trade the Lengthen button in the drop down box for one of the seldom used buttons in the main box on the ribbon?
I'd like to make it so that a user may add a button for my addin by only having to modify an xml entry.
None of the values (name, descrip, tooltip) are null, and reading from the xml is working properly. Each internal name is unique. Why this code would result in an error? The error message is attached.
If there's a known way to dynamically add buttons(in a loop), I'd be happy to use an established method as well.
If it is possible to create proper dimensions for 3D isometric drafting views? In AutoCAD I could set an oblique angle for a dimension but in Revit there is no setting. I can only dimension 3D model views.
Using this tool I wish to create a DVD with a stored project file(vsp). using the Studio Editor/tools/CreateDisc option. I then have problems with subsequent screens because the Previous/Next buttons do not display as per the documentation. Therefore I am unable to go backwards and forwards throught the wizard steps. I have attached screenshots.
I am running Window 7 64 bit Home premium. In other ways the software appears to work fine.
In an attempt to resolve the problem I have attempted to run the service pack 1 dated 2007-01-15. However this refuses to run stating that Video Studio is not installed.
I am experiencing two problems. One is the tool icons in Photoshop are disappearing on the screen. I move the cursor and see nothing on my screen.
The second problem is at other times the proper tool icon and function is not showing up and working. I select for example the pen tool and the hand tool icon show up and the function works as the hand tool not the pen tool?
Every so often while i'm working in Revit the Ribbon/panel bottoms disappear. Even when toggling threw the options i can only get some of it to reappear. I attached what it looks like and when i toggle through the options.
Last night I was editing an In-Place family and for some reason, Revit did not exit the In-Place Editor properly. The Modify tab was kicked all the way to the left on the ribbon to precede the Home tab. Is there a way to reset the ribbon to its default state because, the contextual tabs react to the new location of the Modify tab? I have attached an image.
I am using a M6400 Dell Precison Laptop with Win 7 64 and SP1 has been installed to Revit Architecture
I am running Revit Architecture 2012 on Windows 7 Professional 64 bit... I was drawing a roof and when I finished and exited out of the edit mode my modify tab was gone and was replaced with the "Modify l Roofs > Edit Footprint" option, even though I was no longer in the edit mode. So I exited out of Revit and reopened it. Now my modify tab is infront of my home tab and how this happened or how to move it back.
I am trying to modify a vertical structural wall in elevation view - change from rectangular shape to trapezoidal (to allow a flat roof to drain to east). Did south wall in one elevation; I chose the wall, and it was outlined in red. I was then able to drag the east vertical edge down by a foot, creating desired slope. I now go to another elevation to modify north wall the same way, but when I choose the wall, it comes up with a blue ball in the center of each edge, with little hash marks on either side, and won't let me modify anything. Also, when I choose the wall outline (with the blue balls), I can't get to wall properties.
(Can't edit the element until 'A' resaves the element to central and relinquishes it and you Reload Latest.).this note come when i try to modify or erase any element in revit file and i want to know why does this proplem occur ? and how can i resolve this proplem becouse ineed this file.
whether it's possible to modify the profile of curved walls. Normally when you select a wall, it should be possible to edit the wall and its profile, though when a wall is curved, the button "edit profile" is gray. Is there any other way to obtain a similar effect, maybe using masses or so?
I just installed the student version of Revit 2013. I opened it and everything seems to be working expect when I draw anything (ie topo surface, wall, etc.), the modify tab is missing all the draw options (line, circle, etc) as well as the Finish and Cancel buttons. This makes it impossible for me to use the software without those. Is there a way they could be hidden or is the software just corrupt?
I want to modify the Room number label so that the rectangle outline displays smaller (less wide).
The rectangular box for the room number doesn't show up even when you open and try to edit the family, nor any parameters show up. How do you modify this box and make it smaller?
To modify the sketch line of the railing, click Modify | Railings tabMode panel Edit Path.
However, everything after"click Modify | Railings tab" does not appear anywhere on my screen. The only active editing tools are 'Pick a New Host' & 'Reset Rail'. Is there a special Revit handshake of dance that I need to know?
How can I modify the Fire Rating parameter of a door to be an Instance Parameter instead of a Type parameter, or how do I Remove the parameter altogether from the door family?
I am working on my first real Revit project. i need to modify a windows family and in particular i want to change the axis of insertion of the window in the wall. I mean... my window should be placed on the outer edge of my wall. i try to unlock the dimensions that define its position and then i lock the dimension in the new position; the window seems to be ok but only in the RFA file. When i imported it in my project file, the windows moves in the wrong way in my real wall.
since I updated my Mac OS to 10.9.2, my Adobe Premiere Pro CS6 has a problem: when I import MTS-files (AVCHD) from a Sony video camera, I get the video, but I don’t get the audio! That’s strange, because when I import other video formats like mp4, everything is fine, and I get video AND audio.
I also tried Premiere CC test version, but there’s the same problem.
Before my update I had Mac OS 10.6 and Premiere worked fine.
I am using AutoCAD 2013 and, out of nowhere, my keyboard aliases don’t work. Ex: When I type m for MOVE, I get MADD. When I type co for COPY, I get COLOR. If I turn off ‘Auto Append’, and try it, I get ‘UNKNOWN COMMAND’. I’m at a loss as to what to do. (I checked to see if I lost the acad.pgp file, but it’s still there.) how to get them back.
Why the texts that have the same "Textstyle" don’t change as the settings of the style change?
For example, suppose that particular texts have the T1 as text style. Then why if we change the value of “paper text height” of the T1 then the texts (that belong to this style) don’t respond?
At the same time, this behavior is valid pertaining the dimension style, i.e, if we change the text height of the dimension style then the dimension text responds and is changed!
When constructing my contours in the site plan, they are not visible. The graphic visibility shows they are visible. When I go to the 3d views the contours are visible.
I inserted a CAD link "this view only" and I cannot now get it to turn on in any other view. I used this option so I would not have to hide it in every view. Now do I have to delete it and start over inserting it so it shows up everywhere?
1. I prepared a 57 mm square, proportionally resized it to 58 mm and applied enter for the change but it remained as is i.e. 57 mm sq. Next I made the same changes through property bar, it worked. Through further experiments I observed it only make transformations through enter if we give x=val and move to y=val through tab and press enter. Or if we directly give new value to y and press enter. The property bar doesn't has this problem.
2. Transformations dockers problem of showing wrong position on y-axis. Screen shot attached.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key. This problem remains as is from v16.0.0.707.
4. Printing - EPS with CMYK / Native colour management shows graying problem on RIP. Facing it as a major problem.
Problems encountered even after resetting through pressing F8 at startup.
