VideoStudio :: Previous And Next Buttons Not Showing In Create DVD Wizard?
Dec 18, 2010
Using Ulead Video Studio 10.0.0110 0 SE DVD.
Using this tool I wish to create a DVD with a stored project file(vsp). using the Studio Editor/tools/CreateDisc option. I then have problems with subsequent screens because the Previous/Next buttons do not display as per the documentation. Therefore I am unable to go backwards and forwards throught the wizard steps. I have attached screenshots.
I am running Window 7 64 bit Home premium. In other ways the software appears to work fine.
In an attempt to resolve the problem I have attempted to run the service pack 1 dated 2007-01-15. However this refuses to run stating that Video Studio is not installed.
I have been trying to create a short video that will show some video through a title. I have found a Corel Tutorial on how to do this but it seems to be for an earlier version of VS since I do not see some of the screens in X5 that are shown in the tutorial. I am still basically a beginner with some of the VS features so may have easily overlooked the process.
Every-time I synchronizing a folder, Lightroom always shows Previous Import for the found images.I think this is very annoying, since I manually have to point to the synchronized folder.When I synchronize a specific folder I expect Lightroom to stay on that specific synchronized folder!There should at least be an option for this in the preferences but I haven't found anything...
I'm currently following a longer Lightroom 5 course on Lynda and this don't occur on the authors mac when synchronizing occurs!Is this a windows-only issue or should I dig deeper into my manual?
My computer crashed and had to reinstall everything, well almost everything, still re-installing. The issue that I am having is the Instant Project-Wizard button/icon, that is suppose to be located above the Timeline is not being displayed. This applies to both programs, VideoStudio X4 & X5 versions.
I’ve installed Revit 2014, but mainly using 2013. When I installed 2014, the button on the 2013 ribbon started acting funny.
When I select an element, a wall for instance, I don’t get the proper buttons under the MODIFY tab showing up. I have to hit the show/hide button on the drop-down menu that controls the visibility of the ribbon & buttons to get the EDIT PROFILE button.
And it doesn't end there; when I get into EDIT PROFILE mode, the proper buttons are not showing up again. Again, I have to do a show/hide with the drop down menu, and then the proper buttons show up and I can edit the wall.
If I then select another element, such as a roof, I have to go through the same two-extra-step process to edit the roof.
I just re-installed 2013 yesterday because I’ve been having issues with 2013 crashing on a daily basis, and then not opening at all. Yet the same problem still happens. I un-installed 2014, and the problem still happens. After I un-installed 2014, I did a repair on 2013, and the problem still persists.
I spoke to my Tech Support, CAD-1, this morning and they told me it’s possibly an issue with 2014 over writing some .NETFRAMEWORK files for 2013 (or something like that). They saw the problem on my system but couldn’t resolve the issue.
I’ve called Autodesk Tech Support, and of course the made a ticket and “will get back to me.” (I’ve not had much luck w/ Autodesk Tech Support in the past, and have a bad taste in my mouth because of it)
Is there a particular reason that the intersection wizard will not create the profiles if you select the horizontal alignments rather than let it create them by offset?? My EOP is not always parallel to the centerline. Why bother giving the option to pick out a name if it isn't going to work.
I am having a problem viewing some previous videos that I made (I have had two different photo cameras since then and had used some of their software) could that be a problem?I get a message that the computer or disc player cannot find the file to open it.I have read articles about not being able to open VOB,BUP,IFO FILES but I am at loss on what or how to properly correct this concern.I am running windows7.0 and have corel video x5 software .
Trying to redo a disc I did in 2006 on a previous program. When I go to capture and then import, it shows 2 files, title and chapter. They are both the exact same thing? Is there any particular reason for this?
I have a user in my group that is hesitant to upgrade to 2012 because , he has many lisp routines that are associated with the PREVIOUS selection feature. This selection is very useful in that when you are moving or selecting many objects you can enter P for previous and the object will be selected.
In 2009, when you select objects then hit escape, then try to execute a command requesting to use the Previous, AutoCAD will remember the last selected object and then highlight it.
In 2012, when you select objects then hit escape, then try to execute a command using P for previous, it will not highlight the previous object selected but will highlight the previous object where a command was executed on.
Hope I haven't lost you. It seems there should be a setting under SELECTION of how to manipulate the Previous selection feature.
Trying to burn DVD after completing project. All menus missing, next button greyed out and will not work. Downloaded a patch to make this work when I first purchased software however computer crashed and disk image I restored did not have this patch included.
Have downloaded and installed both service packs for this software. Did not make any difference.
Trying to create rollover buttons in Xara Pro which are essentially just text, the rollovers are working fine but instead of hiding the button below on the rollover state it is just placing the rollover state on top of the one below "the normal state", you can see a slight hint of the normal state. Is there a way to make Xara only show the rollover state on mouseover, my buttons are just text so it's fairly obvious that the normal state is still showing beneath the rollover.
Newbie to paint.net and I dabble with making my own DVD menus and wanted to expand my creativeness with making my own buttons and graphic images to use on these DVD menus. DVD menu buttons that look good requires image mask overlays and/or manipulating image and color attributes.
Bottom line question: Does Paint.net have all of the tools needed to create DVD menu buttons, and are there tutorials that explain how-to?
I'd like to create a video with an awkward resolution: 400x70. I don't see how to do this in VS5. Even when I go to the "Share" option, my custom resolution buttons are greyed out. Is there a way to do this?
I am writing a script for Illustrator. I created a palette with some buttons. I like to keep the palette open while working in Illustrator. The problem is, that the buttons don't work. For example, I have a delete button that should delete my active selection. When I change the Window Type from palette to dialog everything works correctly.
var w = new Window ("palette"); w.orientation = "row"; w.text = "Path Transform"; var f = File ("/C/icons/corner-tr.png"); var corner_tr = w.add ("iconbutton", undefined, f ); var corner_tl = w.add ("iconbutton", undefined, f ); var corner_br = w.add ("iconbutton", undefined, f ); var corner_bl = w.add ("iconbutton", undefined, f ); corner_tr.onClick = function () { selectedObject[0].remove(); createLines(); }
I'm trying to create a 12 page interactive PDF with a set of 12 buttons (set in the master page) at the bottom of page that relates to each page. When clicked the button should you directly to that page.
I have used this method many times before in CS5 using Go to destination in Buttons and setting each page as a destination. It normally works great.
However, in CS6, once I export to interactive PDF and open in Acrobat Pro the buttons all seem to disappear once you click on the 3rd or 4th page button.
I have stripped the indesign doc back to include no other content - just the buttons, with no rollover effects etc but I am still having the same problem
I can supply the relevant indesign doc and exported PDF. One forum member suggested trying to open it in Acrobat Reader instead and it worked fine. This is OK to a point but I really need it opening in Acrobat Pro.
When I apply a video filter the sliders and button under the original/preview box are hidden beyond access by the windows box's boundaries.
I can see they're just hidden below the timeline of the split original/preview section. Can't seem to maximize the windows box to show the whole thing and access them. Here's a picture to show: [URL].......
Is this a common problem? Is there a work around? Has it been fixed in VS X4?
Quick edit: this happens with more than just one filter.
I'm working on creating a disc menu in VS Pro X4. I've customized several parts of my menu (background, music, text, etc.), but I can't figure out how to change the little highlight icons that appear next to the selected menu options. Is it even possible to customize these?
I am using AutoCAD 2014 and trying to create custom buttons as a short cut link to open external files, such as a link to company standards, osha, or any file in general. I basically justa want to be able to open the file from with-in autocad. Like a hyperlink without having to click an object.
I cannot save my previous files created on a student version to an upgraded 2014 version. I tried changing the save as path in the options menu, but no luck. I am able to open the file in the upgraded version but it states that it will open as a student version. Also I cannot copy and paste anything from the student version to the upgraded one. Not sure why.
I record video game footage for a youtube channel. I am recording using Dxtory, which can record audio from multiple sources. Currently, it records from two sources, one for gameplay sound and one for microphone voice overs. The problem is when you play the video through a video player, you have both gameplay audio as well as the voice over audio. But when I put the video into Corel for editing, the only audio is the game play audio. I know the video file contains both audio but Corel seems to disagree with me. I am new to Corel, so am I just missing something or should I be looking at a cause outside of Corel?
how do I end my videos with the last text that I used to continue to show on a black background? I have accidentally done it before but could never replicate the process.
I want my website URL to continue to display in my video once the video is over. I don't want to go to a blank black screen.
Just noticed that projects with Boris effects in X4 that are imported into X5 (as a VSP file) don't seem to carry over the effect. I had some trouble last year when I started a project in X3 and then tried finishing it in X4. But this time I noticed the Boris effect is completely missing when I open the file in X5. I spent quite some time getting the effect I wanted with Boris in X4 so I'll just have to create a video file and then pull that into the time line with X5. The other thing I noticed was the VSP project from X4 is very jerky and not fluid at all in X5 even with the same preferences set in X5 as were in X4 (proxy enabled). The jerky movement is mostly with the Motion Studio clip I created but again like I said I had a bad experience once before working on a project started in a previous VS version so I should have learned. It's only less than 30 seconds of work so I'm not too concerned. I couldn't wait for Father's Day so I started it on X4. But now I can't wait to play with the new. Got the lawn done, other chores completed and the kids are leaving alone me to play with my new toy for the rest of the day
I use VS Pro X4 sporadically, but I seem to recall that when previewing my work before burning a DVD, I was able to see my chapter's/menu's that I created - in the Adding/Editing Chapter option. I would then click on their remote control and select/test out my "links" before burning a disc. I must be doing something wrong because when I choose Preview, my main screen custom menu doesn't appear.
If I play around a bit, I can select "Top Menu" on the remote and click a number - which brings me to the chapter (but again, I can see my main menu/chapter screen - the screen that would appear when someone loads my DVD to play it).
A curious thing I have just noticed is that I no longer have any DivX showing as an AVI option under Custom in either X5 or X6. Don't get me wrong: I know all about the DivX woes of other users here. But on this same computer, I have always been able to update to the latest version of DivX and use it with no problem. Today I updated DivX to the very latest version, and went to make sure it showed in VS, but it was not there in either X5 or X6. Nor can either program "see" DivX clips I have stored on the computer.
A few weeks ago, I was having trouble getting X6 to see the various proDad and Boris filters added in the Ultimate package. That was eventually resolved, but in the process I had to uninstall and reinstall both versions. Something else obviously happened then and I am pretty sure it removed the DivX capacity, since all I have now showing under the AVI Compression option, apart from uncompressed, is DV Types 1 and 2, and the MJPEG codec. I used to have a lot more, including, apart from DivX, Cinepak, Microsoft mpeg-4 V1 and V2, ffdshow, Intel IYUV and XVid.
FYI, I have tried renaming the 15.0 and 16.0 folders in Win 7 C:Documents and Settings[My Name]Application DataRoamingUlead SystemsCorel VideoStudio Pro I realise that is mainly to do with repopulating the filters, but thought I would give it a go.
I also re-loaded an older version of DivX which I know had previously worked in X5, though I had never checked it in X6 (8.2.2). That did not work either, including after a reboot.
Also FWIW, I uninstalled XVid, which had previously showed up in X5, and reinstalled it. But it still does not show in either X5 or X6, including after a reboot.
FWIW, I have also checked on another computer on which I have X5 (though not X6 yet) loaded, and that has all the AVI filters mentioned above as missing, plus a variety of others specific to that computer (related to a Matrox program I have loaded on it).
I have just tried connecting a Panasonic PV GS300 camera using a firewire connection to Videostudio 4. For some reason the camera is not showing up as being connected. It is showing that there is no driver installed, but I understand that no driver is required.
