how do I end my videos with the last text that I used to continue to show on a black background? I have accidentally done it before but could never replicate the process.
I want my website URL to continue to display in my video once the video is over. I don't want to go to a blank black screen.
I have been trying to create a short video that will show some video through a title. I have found a Corel Tutorial on how to do this but it seems to be for an earlier version of VS since I do not see some of the screens in X5 that are shown in the tutorial. I am still basically a beginner with some of the VS features so may have easily overlooked the process.
View 3 Replies View RelatedIs there no simple way to select a start and end time for the video timeline?
I have the text the way I want it, but it's OVER the video. I want the text to come up first then the video. The only way I was able to accomplish this is by drag and dropping the video into overlay track timeline. That won't work b/c I have to overlay the track yet. I know I can overlay then save then reimport. but something as basic as delaying when the video portion starts by 8 seconds should be simple. If I want an 8 second delay before my video starts how do I "insert" that delay before the video note: I want a HARD delay not fade in fade out.
How can I enter continuous text that runs the entire length of a 8 min project. I know how to enter a title, but I need unbroken text narration.
View 2 Replies View RelatedI'm using Corel videostudio X6 and I have 2 problems.
1. when i go in to track/customize motion mode, the window is bigger than the screen so i can't use this option (i'm using lap top wide screen). like in here: [URL] ....
2. when i'm adding a text to low quality video the text doesn't look well and i wonder how can i maintain the quality of the text?
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies View RelatedI rendered the video previews on the timeline (5 video timelines) The length of the timeline is 1 hr 20 min. The first 37 minutes playsback fine but from that point on, the edited video flickers showings video from the footage on each stacked timeline. I restarted computer hoping that would take care of the problem but did not.
View 2 Replies View RelatedDoes any video showing sub entity selection with use of control key?
I can not seem to get it to work.....so I don't know if I am doing it wrong, or if I have somehow disabled the feature....
Perhaps there is a link out there showing it working?
I'm making a hybrid between machinima and an "MLG parody".
h264, 720p, 30fps - Eventually going on youtube.
The setting is basically a "box" of gameplay videos with the scene inside. One wall is visible in the screenshot, there are 10 total 3d models within a fast moving 30second time frame littered with Trapcode Form, Element 3D animations, and greenscreens.
My issue begins with a fast moving camera which pans around the character below as he animates in from a green orb. Obviously the bitrate is through the roof, artifacts appear and slowly go away after the camera stops (screenshot below). I can smooth the camera out and add motion blur, but things seem pixelated even when the camera is still.
The artifacts slowly disappear, but another problem arises with a Trapcode Form blob below; The blob also has artifacts, probably the result of a massive bitrate from a combination of things - would the background videos be a serious cause of this?
The capture went just fine when digitizing my tape and the .mov file has both audio and video during playback in both quick time and Adobe Premeir Pro, but when I drag it into the time line only audio will show up. Even weirder it's 4 layers of audio instead of just one audio and one video. This only began with videos that I catured today. When using footage I captured on a previous day it works just fine. What went wrong? Where's my video!?
View 1 Replies View RelatedI'm wanting to create transparent text over a picture with only the outline of the text showing. So basically, I need to only see the stroke of the text and have be picture show thru from behind.
View 9 Replies View Relatedi am trying to create a drop shadow on text. i select the text and then copy and then paste in back. however, the copy shows up way above the text and not behind it. what am i doing wrong?
View 2 Replies View RelatedIs there any way to push the video in the video track after the title track is completed ....
View 4 Replies View RelatedWhen i mark Text/Dimension/Multileader and such in autocad 2011 LT, i get an issue, which i have tried to shown on the picture.The problem is that when i mark them, they show the current size they have, plus any other size they have had (Annotation it seems).
I Make a dimension. The overall annotation scale is 1:10. Now i change the overall annotation scale to 1:100. Then i set the overall annotation scale back to 1:10, i click my dimension, and it now shows how it currently looks, plus how it looked when the annotation scale was 1:100. This way i end up with every text object showing up 5 times when i mark them.
In the past day I have run into a problem whenever I copy and paste any text inside Illustartor CS6. If I copy text from outside Illustator and paste in a file, everything is ok. But if I copy text from inside an AI file and paste into another AI file or to the same file, I get a bunch of extra text that gets displayed before the pasted text. In the example below I copied and pasted the text "This is a test" within the same AI file, and got the a bunch of information above the text.
View 25 Replies View RelatedI record video game footage for a youtube channel. I am recording using Dxtory, which can record audio from multiple sources. Currently, it records from two sources, one for gameplay sound and one for microphone voice overs. The problem is when you play the video through a video player, you have both gameplay audio as well as the voice over audio. But when I put the video into Corel for editing, the only audio is the game play audio. I know the video file contains both audio but Corel seems to disagree with me. I am new to Corel, so am I just missing something or should I be looking at a cause outside of Corel?
View 1 Replies View RelatedI have installed the Corel Video Studio Pro X6 Ultimate. I installed the plugins, but they are not showing up in my effects at all.
View 2 Replies View RelatedJust noticed that projects with Boris effects in X4 that are imported into X5 (as a VSP file) don't seem to carry over the effect. I had some trouble last year when I started a project in X3 and then tried finishing it in X4. But this time I noticed the Boris effect is completely missing when I open the file in X5. I spent quite some time getting the effect I wanted with Boris in X4 so I'll just have to create a video file and then pull that into the time line with X5. The other thing I noticed was the VSP project from X4 is very jerky and not fluid at all in X5 even with the same preferences set in X5 as were in X4 (proxy enabled). The jerky movement is mostly with the Motion Studio clip I created but again like I said I had a bad experience once before working on a project started in a previous VS version so I should have learned. It's only less than 30 seconds of work so I'm not too concerned. I couldn't wait for Father's Day so I started it on X4. But now I can't wait to play with the new. Got the lawn done, other chores completed and the kids are leaving alone me to play with my new toy for the rest of the day
View 3 Replies View RelatedI use VS Pro X4 sporadically, but I seem to recall that when previewing my work before burning a DVD, I was able to see my chapter's/menu's that I created - in the Adding/Editing Chapter option. I would then click on their remote control and select/test out my "links" before burning a disc. I must be doing something wrong because when I choose Preview, my main screen custom menu doesn't appear.
If I play around a bit, I can select "Top Menu" on the remote and click a number - which brings me to the chapter (but again, I can see my main menu/chapter screen - the screen that would appear when someone loads my DVD to play it).
A curious thing I have just noticed is that I no longer have any DivX showing as an AVI option under Custom in either X5 or X6. Don't get me wrong: I know all about the DivX woes of other users here. But on this same computer, I have always been able to update to the latest version of DivX and use it with no problem. Today I updated DivX to the very latest version, and went to make sure it showed in VS, but it was not there in either X5 or X6. Nor can either program "see" DivX clips I have stored on the computer.
A few weeks ago, I was having trouble getting X6 to see the various proDad and Boris filters added in the Ultimate package. That was eventually resolved, but in the process I had to uninstall and reinstall both versions. Something else obviously happened then and I am pretty sure it removed the DivX capacity, since all I have now showing under the AVI Compression option, apart from uncompressed, is DV Types 1 and 2, and the MJPEG codec. I used to have a lot more, including, apart from DivX, Cinepak, Microsoft mpeg-4 V1 and V2, ffdshow, Intel IYUV and XVid.
FYI, I have tried renaming the 15.0 and 16.0 folders in Win 7 C:Documents and Settings[My Name]Application DataRoamingUlead SystemsCorel VideoStudio Pro I realise that is mainly to do with repopulating the filters, but thought I would give it a go.
I also re-loaded an older version of DivX which I know had previously worked in X5, though I had never checked it in X6 (8.2.2). That did not work either, including after a reboot.
Also FWIW, I uninstalled XVid, which had previously showed up in X5, and reinstalled it. But it still does not show in either X5 or X6, including after a reboot.
FWIW, I have also checked on another computer on which I have X5 (though not X6 yet) loaded, and that has all the AVI filters mentioned above as missing, plus a variety of others specific to that computer (related to a Matrox program I have loaded on it).
I have just tried connecting a Panasonic PV GS300 camera using a firewire connection to Videostudio 4. For some reason the camera is not showing up as being connected. It is showing that there is no driver installed, but I understand that no driver is required.
View 3 Replies View RelatedUsing Ulead Video Studio 10.0.0110 0 SE DVD.
Using this tool I wish to create a DVD with a stored project file(vsp). using the Studio Editor/tools/CreateDisc option. I then have problems with subsequent screens because the Previous/Next buttons do not display as per the documentation. Therefore I am unable to go backwards and forwards throught the wizard steps. I have attached screenshots.
I am running Window 7 64 bit Home premium. In other ways the software appears to work fine.
In an attempt to resolve the problem I have attempted to run the service pack 1 dated 2007-01-15. However this refuses to run stating that Video Studio is not installed.
Is there a way to set 20 fps for my video in corel video studio x3 ?
i made a 3d animation and rendered about 3000 single frames as .bmp . Now i want to put them together to a video. the speed of the animation is preset, so i need every frame to show up for 0.05 second..... 20 fps not 15, not 24, not 25 and not 29.97, but exactly 20 fps. i don't know if i am just very stupid, but i can not find the settings for this.
With the installation of SP1 (VSX4), the options to create a blu-ray video file (assuming 1920x1080 only, though the same options exist for 1440x1080) are now:
Blu-ray (1920 x 1080)
Blu-ray H.264 (1920 x 1080P)
Blu-ray H.264 (1920 x 1080)
Now, I want to create a 'standard' Blu-ray disc of family videos. My camera is a Canon Vixia HF20, recording in 1920x1080 in the '60i' mode. The camera creates AVCHD formatted files. I know I don't want the progressive option, however, what is the difference between the other two options (is it MEG4 vs. AVCHD? If so, what should I choose when creating a new disc?). I want my disc to support as many blu-ray players and HDTV's as possible since I will be giving copies to various family members (meaning I don't want a format that supports only the latest releases of blu-ray players).
Can it actually be done? If I so much as drop 3D file onto the timeline and tag it as 3D (SBS L-R in my case), I get the "... lost 3D attributes..." message when I try to create a 3D file. I tried tagging a 2D file as 3D for S&Gs and got the same result. In case it matters, the files are in .avi format (and even rendering a 2D version of these makes a jumpy video, but I digress...).
View 9 Replies View RelatedIs there anyway to convert the video to 4:3. When I save it 4:3 file it doesn't cut it down. It makes the video look back. Can I cut the outside edges to make the video 4:3?
View 3 Replies View RelatedI just purchased Video Studio Pro X3 and I love it . In my opinion it is possible to capture video from the video camera. I have a JVC HD camera
This the camera I purchased.
[URL]......
I would like to hook my camera up to my computer
[URL]........
How do I do this. Now of course my camera records off an SD card and I can just stick it in there and edit. The reason I am hoping I can capture video just like I can with a webcam is because the view screen on my camera no longer functions so therefore I can only point in my general direction and center up the shot in post edit.
When I record in 720p @ 30 FPS my raw files are usually around 30-35kbit rate, however whenever I compress the videos they seem to drop to around 18k bitrate which really put my videos below the standard I want. I've tried to add my own compression templates but whatever I do, I can't seem to get any of the compression options above 20.000 bitrate.
I have tested with Sony Vegas and with that I can pretty much choose myself what bitrate I want it to be. Although I know Corel a lot better and its easier for me to do what I want with it.
- How can I compress my files with higher bitrate? I want it around 30.000k.
Is it me or am I really seeing that X5 has LESS video encoding options vs X4? Really? I remember having lots of choices and options as far as how to encode MP4 the size (or ratio, etc 720 vs 1080p)
I can't seem to get 1080p but I can get 720p but in X4 I recall I could do 1080p for MP4 though.
I'm new to video editing and am using video studio Pro X3, everytime I edit some video or want to use a clip. The trimmed video always flashes the first frame at the start and finish of the trimmed clip. Also when I add a subtitle or text in the time line, that first frame flashes by at the beginning and end of of the text. This is very annoying and doesn't look very good in the project. How can I remove this first frame and how do I prevent it in the first place??
View 1 Replies View Related