It could be interesting to activate a layer filter from a combobox (I'd like to have this combo into the layers panel) in order to have fast access to the layers beginning to this filter.
View 3 RepliesIt appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedMy ACad2006 Layer Combo Control bar appears to be locked. It will only show the current layer and will not show the layer of an object that is selected with the pickbox. I must have accidentally made a change somehow, but don't know how to undo this.
View 2 Replies View RelatedJust upgraded to LT13 from LT12 and noticed that the layer filters don't change the list of layers in the manager. for example if I click on an xref'd drawing in the filter tree in past versions only the layers in that drawing would be visible. In 13 all layers are still visible. Is there a setting in this version I am unaware of?
I'm sure this is the first of several "quirks" I will discover with the new version that I will most assuredly ascribe to a step backwards in functionality in the interest of pushing out a new piece of software. How many days before the first service pack is available?
How to bring Layer filter from one drawing to another drawing?
View 1 Replies View RelatedI'm having issues with Civ3d 2013. I pushed off upgrading because of the format change and the service pack release. I was hoping little glitches would be fixed.Here are the a couple of glitches to date that I saw no resolution to in the long list of threads.
1. Layer filters do not filter, unless I have checked "Apply filter to toolbar". The problem is, I don't want to apply them to the toolbar.
2. Publishing to PDF - when set to lines merge (set in the page layout and the publish setting), the wipe outs don't work, and the background masks on leaders makes a faint border around the text in the PDF. When set to overwrite, to get the wipeouts to not print to the PDF as a big black blob, they have to be on a layer set to color 255. I can work around most of the wipeouts, except for dimensions because the background mask doesn't seem to take.
another complaint that doesn't have anything to do with AutoCAD, but since I'm venting... we just got a KIP 7100 printer/scanner. WORST printer/scanner we've ever had. Period. Getting the right driver, then getting the driver to produce good drawings to the correct paper size was ridiculous, and the gray shades still look like we're using a big dot matrix printer. Scanning is the most painful thing; compared to the Xerox 6204 we gave up, the quality is poor and PDF file sizes are huge.
When I use the Layer Isolate command, then use the Layer Unisolate command, everything seems to work fine, as far as displaying the correct layers again. However, when I go to the Layer Manager, I noticed that all frozen or frozen in current viewport are also turned off.
LAYISO set to OFF (use fade?)
This only happens in a maximized viewport, not in model space.
This problem just started when I upgraded to 2014. When I try to set up layer filters the Layer filters properties dialog box does not show. I'm guessing the function is working its is just that the dialog box is poping up somewhere out of view of the monitors, forgot to mention it is a 2 monitor set up.
View 2 Replies View RelatedThe sketch section in my Filter Gallery are grayed out. Provide me with the steps to activate it again.
View 5 Replies View RelatedFor printing or mailing purpose, i used to re-open big .psb layer files (2-6GB) in cs5 and cs6 with keybombo "alt" and "shift" while double clicking the document in the finder window (10.6 + 10.7.5), in order to save time.
This is not possible anymore, everytime i open a document this way its white and empty in photoshop.
I am finding the layer combo control in 2010 an annoyance. The drop down box does not access as many layers as did the version in 2009, and I find myself continually searching through the drop down box to reference a particular layer. How to rectify to have it similar to 2009?
View 9 Replies View RelatedHow do I activate the "keep" option in photoshop touch
View 1 Replies View Relatedcamera raw filter does not show up on the filter drop list on CC. I am trying to determine why this is the case. So far everything else seems to work.
View 2 Replies View RelatedWhy new rooms show up in lieu of existing rooms when"show previous and demo" are set for the phase filter? Every single other existing element including doors, walls, windows, etc. show in the "show previous and demo" phase filter with the exception of rooms.
View 5 Replies View RelatedWhat is the fastest way to activate the right layer for editing when multiple transparent and background layers are overlapping in gimp?
For example in the photoshop I would click left and right mouse buttons on an object of a layer that I need and a list of layers which have visible objects at the area where i click will appear and i will choose the one i need(which I meant)In Gimp, I find it difficult for me to access the right layer fast, when I have many layers.
i cannot open create new layer in elements 9 the cursor does not activate
View 1 Replies View RelatedThe big problem with CAT. 3dsmax 2012 64-bit. Problems have appeared after installation SP1. I adjust a skeleton. In Link Info In Setup Mode I activate Animation Controller and Additive To Setup Pose. Then I create an Absolute Layer and activate Setup/Animation Mode Toggle. The bone departs not clearly where.
View 5 Replies View RelatedHaving issue with the layer dialogue box showing not enough layer name. Is it possible to widen it or is that controlled somewhere?
View 1 Replies View RelatedWhen i click on the green line has you can see on the image. The layer toolbar wont show me the right layer, like if it's not working. But i can see the right layer inside propreties.
Is there a system variable to ajust to see my layers inside the Layer tool bar?
Is it possible to creae filter that would only show layers that are in use (actually have objects on the layer)? How would that be done?
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
I'm adjusting a photographic image and am using both a filter effect and a layer style in the same layer on a Smart Object. I want to separate the two effects into two layers, so one layer has the filter effect (Nik) and one layer has the layer style (Color Overlay) (with the goal of merging/rasterizing the Nik filter effect with the Smart Object but keeping the layer style unmerged). I can make two layers and move one effect without problem, but the visual result of each effect on a separate layer is quite different from having both effects in the same layer. The Blend Mode for all my layers is Normal. Within the Color Overlay panel, the blend mode is Linear Burn.
Layer 1: a layer style and a filter effect, stacked
looks very different from....
Layer 2: a layer style
Layer 1: a filter effect
I made a wax seal on Photoshop with a lot of embossment, bedevilment and a Smart Filter. It's done and I just need to make it smaller so it fits well on my certificate. When I resize it (Ctr + T) It pops up a message that reads:
______________________________________________
Adobe Photoshop CS6 Extended
"Smart Filters applied to layers contained in this group will be turned off temporarily while the transform is being previewed. They will be applied after committing the transform."
OK
[] Don't show again
______________________________________________
I click OK and I re-size the layer with free transform, and then hit enter. The Layer is resized but my Smart Filter which creates a wavy affect around the seal is totally distorted.
How do re-size my layer with smart filter without affecting the smart filter aspect of the layer.
I have a curve which is a set of lines and arcs.This is present on a layer. code to filter these objects based on layer.I also need to convert all the object ids to a single entity.
View 4 Replies View RelatedThe freeze tool is not pictured on the left with the other tools. I can access freeze by pressing the "F" key, but there is no way to unfreeze since that tool is missing as well. Only seven tools are seen now.
View 1 Replies View RelatedI am using the trial of LR5. I have made some adjustments with the Radial Filter. When "opening as a smart object in CS5," the radial filter adjustments do NOT show up. Crop does, basic exposure adjustments, but no radial filter.
Would it show up in CS6? I do not want to go to CC.
I'd like to understand to logic behind code "NaN" which controls the size of a combo box. I found 2 of those combo boxes with the same value but the onscreen size is different.
View 3 Replies View RelatedI have two layers. I want one layer to fade such that the layer under it "fades in".
View 2 Replies View RelatedI have been working on an extensive template and wanted to add some layer filters too it. I was wondering if there was a list anywhere that outlines what different characters mean to the fillter? What I mean is... I know that ~*|* excludes xfref layers because ~ means 'not' and * means "anything" and | is the character we are looking for. But what are all the other things that filters understand?
View 2 Replies View RelatedI'm trying to set the active Layer filter. I tried myDB.LayerFilters.Root.Name = "Filter1" but it wouldn't work.
View 9 Replies View RelatedI'm attempting to create a layer property filter so that all used layers except xref ones show up. I can use the Invert filter option, but that doesn't stay checked between sessions for some reason. How can I set up this property filter?
View 2 Replies View RelatedI have AutoCAD LT 2008 soon to be LT 2012 and I also have AutoCAD 2012.
I would like to know if there is a way that I can set up a Layer Filter and transfer it from one drawing to another.
Ideally we would be able to do this in the LT version not full. If there is some way to do this with Tool Palletes that would be great.