AutoCAD LT :: Ribbon Combo Box Display Size

May 30, 2012

I'd like to understand to logic behind code "NaN" which controls the size of a combo box. I found 2 of those combo boxes with the same value but the onscreen size is different.

View 3 Replies


ADVERTISEMENT

AutoCAD 2010 :: Ribbon Combo Box - Text Height

Jan 18, 2013

When creating Mtext, I can't figure out how to specify a given height using the ribbon. Clicking on the "A" on the "Home" tab brings up the "Text Editor" ribbon and displays the Mtext editor in the drawing area. On the "Style" panel of the Text Editor ribbon is a drop-down box with a default height of 1/8". Clicking on this drop-down box gives the list, 1/8", 1/4", 1'-6", 1/8", and 3/16". It appears those are my only choices, but I need to make Mtext that is 1'-0" high. If I try to highlight the size selected in the drop-down box and type in 1'-0", AutoCAD erases my typing, replacing it with the 1'-6" choice (or some other member of the preset list). It does this whether or not I have typed text in the Mtext editor, highlighted that text, etc.

If I hover the mouse over the drop-down box, a tooltip comes up that says "Ribbon Combo Box - Text Height / Press F1 for more help." Pressing F1 brings up the Autodesk Exchange window which is blank except for a spinning wheel animation in the center that never stops. The promised "help" never appears.

Right now my only workaround is to create Mtext using one of the heights that AutoCAD has chosen to make available, then select it and change its height using the Properties palette, which may or may not be so easy depending on whether the height I need is very different from the height I was forced to use and the zoom factor of my view (the created mtext might show up as an almost invisible dot, forcing me to play "Where's Waldo" to select it). This is an almost unusable kluge. How can I set the size when creating the Mtext, not afterwards? How is the list of sizes available in the drop-down box determined?

View 4 Replies View Related

AutoCAD Inventor :: Adding Combo Boxes To Ribbon Panels?

Oct 16, 2010

I preparing an addin written in VB.NET VS2008 which allows uses to do several different function depending on the type of document opened and the ribbon environment active.

I have add lots of different icons/buttons to execute simple runtime commands, but I wish to develop my code a little better.

I currently have code that when the button is pressed opens a form with a combo box. If the active file opened in the workspace is as Assembly Document, the combo box is populated with the colors from the Styles Library. Once the user selects a colour, the program then cycles through all of the parts in the assembly and changes the colour at the part level be that which the user has selected.

I would like to short cut around opening the form and maybe add a combo box definition directly to my custom panel that I have created in the "id_TabAssemble" Tab ribbon.

have a snippet of code which adds a combo box to a ribbon Tab panel and allows that combo box to populated with whatever the user desires.

People may say that this is already done with the colour combobox that is in the Quick Tool menu for assemblies, however this colour change is only at the view rep level and not at the part level, if the part is used again in a different assembly the colour will be the original colour.

View 6 Replies View Related

AutoCAD .NET :: Create Ribbon Control Combo Box With Directory List

May 5, 2011

I would like to create my own Ribbon Control for a custom cui with a combo box that fills in the appropriate directory of scripts.

I will also need a button to execute this script from my combo box that will pass (executescript"my script.scr")

I have Visual C# 2008 Express

I am just starting to look at C# code about how to start this process.

View 4 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Missing Ribbon Combo Box - Workspace

May 14, 2013

I am unable to find the "Ribbon Combo Box - Workspace" to our 2013 MEP or ACA CUI. It is visible in vanilla AutoCAD 2013, but it isn't listed in the Command List (under Ribbon Control Elements). I am unable to transfer it from AutoCAD's cuix either. We typically have this control in our Quick Access Toolbar, but I am unable to create this same environment in the 2013 verticals.

I am unable to see it even using one of the default profiles, like "AutoCAD Architecture (US Imperial)".

View 2 Replies View Related

AutoCAD 2010 :: 2010 Layer Combo Control Display?

Jun 9, 2009

I am finding the layer combo control in 2010 an annoyance. The drop down box does not access as many layers as did the version in 2009, and I find myself continually searching through the drop down box to reference a particular layer. How to rectify to have it similar to 2009?

View 9 Replies View Related

AutoCAD .NET :: Not Able To Display PNG Files In Ribbon

Dec 23, 2012

I am trying to create a ribbon of my own, and the code and execution is fine, but I am not able to put the images.

my images are not more than 1 kb in size and are stored in the resources.resources1.... how do I get them to display.

I am trying to work with the available code found in one of the training sessions,

'Code starts

'on one of my subs I am calling this function 

'ribBtn.LargeImage = LoadImage("FR.png")

Private Shared Function LoadImage(ByRef ImageName As String) As Imaging.BitmapImage

Dim bi As New System.Windows.Media.Imaging.BitmapImage()

bi.BeginInit()
bi.StreamSource = GetEmbeddedResourceStream("MyRibbon_Autocad." & ImageName)
bi.EndInit() ' When i debug the code, the code is exiting at this point, i am assuming it is not getting initialised.
Return bi
End Function

Protected Shared Function GetEmbeddedResourceStream(ByVal ResourceName As String) As Stream
Return System.Reflection.Assembly.GetExecutingAssembly().GetManifestResourceStream(ResourceName)
End Function

I dont see any error, but the ribbon is getting generated but withut any images, just a plane ribbon.

View 2 Replies View Related

AutoCAD Civil 3D :: 2011 - Will Not Display Ribbon

Feb 11, 2013

I am using Civil3d 2011 and the ribbon will not display.  The button seem to work some times but I can't see the ribbon, QAT, or Infocenter.  I tried relaoding the CUI files, updated video card drivers, Civil3D patches, even uninstalled and reinstalled Civil3D.

I can turn the ribbon off (ribbonclose) and the ribon area is rendered correctly on the screen.  I can turn the menubar on/off and it works just fine.

I tried logging on to the computer as different user, as the administrator, etc.  Same error.

I use the Ribbon but now I can't because I can't see it.

I have attached a screen shot of the ribbon area.  

View 5 Replies View Related

AutoCad :: The Ribbon - New Panel Display Control

Apr 26, 2012

I've created a new Panel in the cui....put some commands in it. It has a name and a display name.

i cant for the life of me find out how to make it (or any of the 100's of other panels) display

Right clicking the 'toolbar' area just gives me the usual options?

Architecture 2013 (if that matters)

nice of Autodesk to remove the Autocad classic then!

View 5 Replies View Related

AutoCAD Inventor :: Ribbon Display In Work Pane?

Feb 3, 2012

Some how I changed the way my ribbon displays and I can't find the correct termenology to find the solution on the help section. Previously the different function icons displayed with each panel on the ribbon. now only the pannel and title display. Where do i look to change the setting back?

Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium

View 6 Replies View Related

AutoCad :: 2011 - Display Large Icon Without Text In The Ribbon?

Oct 22, 2012

Is there a way to display large icon without text in the ribbon in autocad 2011? or this feature is only available in 2012 and up.

Is there a workaround to display large button icon without text in 2011?

View 4 Replies View Related

AutoCAD .NET :: Size Of Custom Ribbon?

Nov 16, 2013

I created a custom ribbon for my collection of blocks.

I want to arrange the buttons in three columns each with about 5 to 10 rows.

The ribbon is nicely created, except that all rows are shown.

I would like to see only the first three rows and the next rows as a drop down.

Like in the Draw-section of the home tab in AutoCAD 2013.

View 6 Replies View Related

AutoCAD Inventor :: 2013 Addin Icon Size On Ribbon Is Wrong?

Apr 19, 2012

The icon dispayed on the ribbon for my addin seems to be the large (32x32) icon and i'm not sure how to fix that.

In IV2012 it was fine and i can't find anything in the programming that suggests anything was changed.

Using IV2014 Pro SP1 update 1, Win7-64bit

View 3 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Customize Ribbon Panel In Ribbon Tab

Nov 28, 2012

I am trying to customize Autocad 2012 ribbon tab. I can't seem to find how to mimic the small arrow that appears in several of the standard menus. For example, in the 3D Solids - Home Tab, the second panel from the left is "3D Solids Home - Mesh" It has a small arrow in the corner that opens up a preferences dialogue box.

How can I add that arrow to a custom panel with that little arrow so that I can add my command to it?

View 4 Replies View Related

Photoshop :: Can Size Of Tool Icons Be Enlarged On Ribbon Or Toolbar

Sep 24, 2013

I'm having a hard time viewing the tool icons and constantly have to squint and put my face on the screen to choose a tool! I'm using a PC in case that matters.

View 1 Replies View Related

AutoCAD .NET :: Where Are Bits Of Ribbon API To Add Slide Out To Ribbon Panel

Jan 24, 2013

Where are the bits of the Ribbon API to add a slide out to a ribbon panel?

Autodesk.Windows.RibbonControl ribbonControl = Autodesk.Windows.ComponentManager.Ribbon; RibbonTab Tab = new RibbonTab(); ribbonControl.Tabs.Add(Tab); // create Ribbon panels Autodesk.Windows.RibbonPanelSource panel1Panel = new RibbonPanelSource(); panel1Panel.Title = "Panel1"; RibbonPanel Panel1 = new RibbonPanel(); Panel1.Source = panel1Panel; Tab.Panels.Add(Panel1);
 
I saw some source that hinted you could use panel1Panel.AddSlideout() but in the search I do not see any Ribbon API that allows for any slideout functionality?Do you *have* to use the CUI API for this?

View 5 Replies View Related

AutoCad :: Layer Combo Control Is Locked?

Aug 3, 2011

My ACad2006 Layer Combo Control bar appears to be locked. It will only show the current layer and will not show the layer of an object that is selected with the pickbox. I must have accidentally made a change somehow, but don't know how to undo this.

View 2 Replies View Related

AutoCad 2D :: Determine Display Size Of Dimensions?

Jul 25, 2012

How to display the annotations properly. Perhaps this may just be a display or view setting but I beleive I have checked them all at least 3 times =).

Even in the video he explains all the things explained here but does not explain exactly how to make the dims and ext lines notate and display properly, in model or paper view (view port). I have tried many ways to create a view port in paper space and annotation several dimensions. I constantly get different text sizes and ext line scaled differently within the same view port.....even after I have locked it.

I am also confused about notating dims in the model space within the paper space view port vs on the paper space outside of the model space view port? Perhaps this has something to do with my issues?

Again it may be because I don't understand another function/setting impacting this well enough yet?? I have tried/used every variable in the Dimension Style Manager on the Lines, Text and Fit tabs to no avail.

View 6 Replies View Related

AutoCad :: Drawing Properties Window - Shortcut Combo?

Feb 26, 2013

Is there a shortcut combo to bring up the drawing properties window? I want a quicker way to edit custom fields.

View 2 Replies View Related

AutoCAD Civil 3D :: Rollover Tooltip Display Size?

Mar 20, 2012

I would like my rollover tool tip to display the entire name of the surface not just the first 16ish and then go to "..." is there anyway to customize this?

View 3 Replies View Related

AutoCAD Civil 3D :: Pipes In Profile Display - Size Changes

Apr 19, 2013

I've got a weird problem with pipes in 2014.  When I edit a pipe (right-click Pipe Properties) and make a change, when I press OK or Apply, the pipe SIZE changes?  It's still listed as a 300mm PVC, but it's being represented as a 410mm?  Look at the attached image.  The storm (green) shoes a 300mm pipe and 375.  The 375 is smaller?  The pipe style (as you can see int he image, is set to display the inside pipe walls.

Nothing is unique here about the pipe sizes, this is a stock pipe catalog. But the size doesn't really change, only how the pipe is drawn in the profile.  I've never seen something like this before.  It measures .418m instead of .3m.

View 3 Replies View Related

AutoCAD 2013 :: Show Combo Box To Activate Layer Filter

Mar 13, 2013

It could be interesting to activate a layer filter from a combobox (I'd like to have  this combo into the layers panel) in order to have fast access to the layers beginning to this filter. 

View 3 Replies View Related

AutoCAD Inventor :: Create Combo List And Put It In Form Then In Text Into Symbol

Oct 30, 2012

Create a form with combo box that user can choose one option for the line notes, would be 15 lines with 15 combos, and if necessary the user should be ale to type something insted of using that pre defined option from combo.

I have 2 ideas to make that work, untill now im trying with this 1º but nothing yet.

First Idea:

Create some (15) boolean parameters to enable each line of this NOTE and when the user choose or type one option, that text go directly to one textbox into a Symbol with the 15 lines. I actually dont know how to make this connection, tried some stuffs that found here on forum, but some are too complex.

Second idea:

Instead of create parameters to control everything, i would create all the controls by iLogic, but that is harder then create many and many parameters ? And by this way, i dont know how to conect one INPUTLIST BOX with a pre defined Global form, or, is easier to create a form by ilogic (if that is even posible ofc) ? And still dont know how to make the connection with the chosen option and the text box.

That is just to "centralize" all my notes, that can be variable for each drawing, that way i dont need to have too much symbols for each kind of note, or even have to type everytime that i need one diffent. Would be nice if the user could just choose them in the right sequence he wants.

View 1 Replies View Related

AutoCAD 2010 :: LAYUNISO Command Combo Turns Off Layers In Layer Manager

Jun 27, 2012

When I use the Layer Isolate command, then use the Layer Unisolate command, everything seems to work fine, as far as displaying the correct layers again. However, when I go to the Layer Manager, I noticed that all frozen or frozen in current viewport are also turned off.

LAYISO set to OFF (use fade?)

This only happens in a maximized viewport, not in model space.

View 1 Replies View Related

AutoCAD Civil 3D :: Pipe Tables - Size Column To Display In Inches Rather Than In Feet

Apr 12, 2012

I've got the Pipe Table style just as I need it except for one thing. I have all circular pipes and I would like the "size" column to display in inches rather than in feet. In the past I was able to multiply this number by 12 in the style composer but that doesn't seem to work anymore.

View 2 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Display Paper Size Of A Layout In Block

Dec 20, 2011

I'm trying to display the papersize of a layout in a block. So far I've looked into diesel and field expressions.

With field expressions I can get the name of the papersize to display that's too long(OVERSIZE: ISO A1), I need only the last two letters.

View 5 Replies View Related

Photoshop :: Combo Box/List Box

Apr 14, 2006

1) I have a copy of a PSD file in which it has a combo box with a descriptive text embedded in it. Is there a tool in photoshop (like in MS Access, etc) that I can use to create the said button? I would like to replace the combo box with email address and password. Do I have to manually/use Photoshop to edit?

2) Since it is in PSD and have to convert it HTML later, any suggestion on how can I make the combo box functional after slicing the image in ImageReady.

View 2 Replies View Related

Photoshop :: Size Display

Aug 19, 2007

when you open a file, how do you see the length and width of the image easily?

So far I see where I can click on the little arrow button at the bottom frame of the window that contains the image and I click on the menu item for "Show" and then select "Document Dimensions" but it displays in inches and not in pixels.

View 1 Replies View Related

Photoshop :: Size Display

Aug 20, 2007

when you open a file, how do you see the length and width of the image easily?

So far I see where I can click on the little arrow button at the bottom frame of the window that contains the image and I click on the menu item for "Show" and then select "Document Dimensions" but it displays in inches and not in pixels.

View 3 Replies View Related

CorelDRAW X5 :: Combo For Getting Outline From Another Object?

Nov 1, 2011

I use this combo all the time for getting the fill I want from another object.

Is there a combo for getting the outline from another object?

What i like about this is you don't have to deselect the target object as in Right Click and Drag.

View 3 Replies View Related

Photoshop :: Good Motherboard Combo And Processor...

Feb 26, 2009

What is a good motherboard-processor combo that is optimal for photoshop CS3?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved