As the title says, when several commands are entered very rapidly, i.e. zoom + extents (z+e), AutoCAD doesn't seem to recognise the second command. I believe there was a command that I came across a while back that adjusted the time delay between entered commands but I am unable to remember or locate it.
Any way to decrease the minimum time between entered commands?
I am using autocad Architecture 2012. the other day it randomly stopped recognizing most commands. I cannot TRIM, CO, OFFSET, ect. all of the main ones. a couple things still work, If I need to draw a circle I can type D and still input diameter. But for all of the rest of those it says "Unknown Command, press f1 for help."
View 3 Replies View RelatedI keep getting the following message when activating:
The serial number you entered is not valid. Try again. (Error 2)
I am testing using script files to automate inserting blocks for As-Built drawings. My script files run fine, but AutoCAD is placing the blocks at a location that is different than what the input on the command line shows. For instance, I am placing a block at (6,6), which is reflected in the command line, but the block is actually placed at (6,5.898). The 5.898 does not appear anywhere in my script file, and the command line even shows that (6,6) was entered for the insertion point.
View 4 Replies View RelatedI have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
When I try typing "L" for line and hit enter (space bar), then click the mouse to draw a line nothing happens. The command is active and the grips are active like the command is ready for me to click mouse to draw a line. Also, hitting the space bar again does nothing.
View 9 Replies View RelatedI have a G300 9-button mouse from Logitech and I would like to assign some frequently used commands to each button, is there any way to do this.
View 2 Replies View RelatedAny way to turn off HUD during commands? Seems to pop up right where I want to select geometry. I came across something about it for 2012 not being an option to turn it off but may be one for 2013
View 1 Replies View RelatedI don't know what I did but all the sudden my ribbons are gone, and after a day of research I found that I can type in RIBBON and it will appear. The only problem is I cannot find a solution docking the ribbon horizontally as it was when my program was installed.
is there a 1800 # for questions or just discussion groups?
I am having problems with the selection commands,
Ctrl + A
Deselect all as they seem to be unknown commands? (Quick select in properties does work) I have loaded my own profile (but have used the default profile aswell to check, still no joy)
My computer has started freezing (busy spinning wheel) between each command or button click that I do on AutoCAD. The lag time started at 5 sec between each command, which was annoying, but now has increased on complex drawings to up to 45 seconds between anything I touch. I work with 3D models and it's has gotten to the point where I cannot get any work out. I've turned off and on paging, turned off network connections, turned off properties and nothing seems to work.
View 3 Replies View RelatedHow to get a list of commands and variables in AutoCad 2013. In the past I always got that from the help files, but it seems now that I cannot find in the help files in this new version of AutoCad 2013.
View 4 Replies View RelatedI just had to replace my desktop computer, reinstalled AutoCad, set it up using a saved profile, everything was working fine until this morning when I came in and most of my buttons on the toolbars return "Unknown Command". Now even when I type in the command on the command line it doesn't recognize the commands. ie _layfrz Unknown command "LAYFRZ) I've gone in and "repaired" the program, shut down the computer for a full restart, to no avail.
View 3 Replies View RelatedI have one user with AutoCAD Design Suite 2013. She is unable to run any of the Raster design commands.The Ribbon is loaded but commands are not working (unknown command).
AutoCAD as such runs fine.
Script (command) to make filter and then select any filter.
I have to run this operation on several files. So, needs it script.
Is there a known problem with 2013 undo? I can be in a new drawing issue 2 commands and the undo drop down is populated with 100's of group commands, makinf Ctrl z useless
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
I use the right mouse click command as my enter. But for the past couple of days when I try to use the move, copy, stretch commands, everytime I go to select a base point - autocad selects the point and then automatically snaps or displaces to a random point off of the screen. I don't know if this has something to do with the right mouse click or not, but I can't figure out why it keeps snapping off screen. If I switch and use the enter key or space bar as enter the problem goes away.
examples:
Command: s STRETCH
Select objects to stretch by crossing-window or crossing-polygon...
Select objects: Specify opposite corner: 13 found
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
Command: m MOVE
Select objects: Specify opposite corner: 43 found
Select objects: Specify opposite corner: 27 found (14 duplicate), 56 total
Select objects: Specify opposite corner: 18 found (14 duplicate), 60 total
Select objects: Specify opposite corner: 14 found (4 duplicate), 70 total
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
I have loaded the Express Tools as here [URL] .... says. The Express Tools appear in my menu bar like normal, but when i try to do anything with any of them —FLATTEN, for instance— autocad does not recognize any.
I am running on Windows 8, Autocad Student Version language Spanish.
finally I got my express tools ribbon but a lot of commands are missing....REDIR for example....
Don't tell me to reinstall AutoCAD Architcture because I already did it twice!
Don't tell my to select the acetmain.cuix by CUILOAD...because..
I also tried the menuload and the appload command but won't load every single lisp routine
from the express folder...can you imagine how many lisp routines the Express Folder has....
AutoCAD Architecture hasn't got such problems with Express Tools.....
AutoCad sticking on commands like copy selection and move tool, It is running very slow and when saving it says there is no system memory, although my Computer has pleanty of memory (the local disk has over 200GB space)
PC has correct specification for AutoCad 13, and I have never had problems until this morning-
In my AutoCAD 2014, after selecting a grip on an object or a point it will snap to other grip points even when osnap is turned off. Is there a command or variable to turn what appears to be an auto grip snap function off?
View 8 Replies View RelatedI'm a student at lone star college in houston, and I'm working on a set of piping plans in autocad 2013. I just downloaded a student version of autocad 2014. I wanted to know if I can work on my plans in both the 2013 and 2014 versions without any hiccups or issues.
View 6 Replies View RelatedI am having problems opening an idw created in the 2013 version on my inventor professional 2014.
The idw contains its own template, views, dimensions, details and cuts.
Upon opening in 2014 to release details of the scale is changed randomly and the views are out of the leaf.
i made some 3d modelling in autocad 2014 in the 3d drawing mode but i have some difficulty in modifying the dimensions of the subobjects.
1 method that i already know is to use the scale gizmo which works but not much as i am not able to set the exact dimensions i need. it only scales the subobject according to the previous size.
modify and determine the exact dimensions of the sub-objects.
each attempt to save as or publish / plot to DWF in Autocad 2014 fails (Device not found) other than the device what am i missing?
tried from the Output tab on the ribbon as well as the application icon save as , publish, and plot all with the same result
I just installed AutoCAD 2014, but it's not pulling my custom .pgp file, even though the folder that file is in is first in my support path.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
I've a problema with autocad 2014 when I start it all programs are freezing about a variable period fron 30s at 1min.
With autocad 2013 I don't has problems.
My instructor taught us to attach images with materials rendering tool to add jpegs to our 3d modelling. Every time I try to use it, it stretches my image to nothing but horizontal lines and despite trying to modify it with the texture editor it eventually colllapses the autocad. Here is my error number. CER_83372936
View 3 Replies View Relateddo you have a detailed procedure for updating autocad 2013 to 2014?
View 7 Replies View Relatedcan autocad 2014 import inventor ipt files?
View 3 Replies View Related
