AutoCad 2D :: Right-Click Setup Customization
Aug 27, 2012
So when using C3D, I have my right-click setup so that when I click on an object, say a multi-leader, surface, etc, a long menu pops up with object-specific options. Such as multi-leader styles and scales, pipe network options, etc.
So today, AutoCAD decided to be lazy and not show that menu. I've tried turning off the R-C customization, then turning it back on, switching the custom options around, applying, then setting them back to the way I had them, starting a new drawing, restarting CADD, and finally restarting my computer. NOTHING.
This has happened to me several times in the past and it just starts working properly again at some point. To draft, modifying C3D objects, without the r-c menu is such a time consuming PITA.
View 2 Replies
ADVERTISEMENT
Jul 3, 2013
My right click customization, which would bring up properties as an option, or could unlock a viewport by selecting it and right clicking. and can also select an x-ref to open, or edit in place, and modify attributes, etc.....has disappeared.
All I get now are basic pan/zoom commands, action recorder, clipboard, etc.....I checked my options, nothing has changed in my right click customization field, but for some reason, it's just not working. Any way to get that back?
View 3 Replies
View Related
Jun 18, 2012
when I wanted to copy objects from one drawing to another or even inside of one drawing, I could right click, "Copy with Base Point" . In 2013 (possibly before) they moved that command along with copy, paste into another command called "Clipboard".
I've been searching for a way to customize that to remove that extra click to access a commonly used command with no luck.
View 2 Replies
View Related
May 27, 2013
I have altered my CUI so when I double click on civil 3d objects it opens up their properties for quick editing. Never had a problem pre 2013 and I am sure this is something I did but am lost.
Every time I double click on any object it just opens up the properties box. It skips right over my double click customization.
View 3 Replies
View Related
Apr 11, 2012
When I change the User Preferences "right click customization" to "Repeat Last Command" and "ENTER" then hit "Apply & Close" it reverts back to the default settings.
View 9 Replies
View Related
Jan 10, 2013
I lost my setup in the right click for my menu. How can I bring it back?
View 2 Replies
View Related
Jun 7, 2013
In our drawing office we use Inventor in a mining materials handling environment. Our output is mainly structural drawings where we require a bill of materials as part of creating a drawing. Whenever I insert a BOM in the drawing environment I get this table which is labeled in a foreign language (it looks like an Eastern European language) and the format is not as per the standard Autodesk installation setup.
How do I either revert back to the standard setup or do a BOM setup from scratch?
We use IV 2013 Professional on Windows 7 64 bit.
View 1 Replies
View Related
Feb 15, 2013
I have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies
View Related
Apr 17, 2012
I have noticed that when I click on any button on the Ribbon Panels it now requires more that one click to activate the button.
View 9 Replies
View Related
Nov 13, 2013
We people are doing the Autocad CAD customization using COM & .NET API.
Now I have heard that we can read or write thedwg file using realdwg toolkit without installing AuotCAD on my machine so it is beneficial that we can do without AutoCAD.
Rather than this advantage, how it can be usefult to our team if our organization will but it ?
View 2 Replies
View Related
May 3, 2012
Trying to migrate my copy of AcadLT 2010 from and XP to Win7. I have successfully moved my menu customization, but do not have the custom settings for point mode/size and leaders that I had set. What file(s) am I looking to move to get this done?
View 2 Replies
View Related
Jan 29, 2012
I am in Customization of AutoCAD and the problem am facing is with dimensions.
Am able to get normal dimensions but problem lies in Parametric Dimensions. How to perform this Linear Constraint Dimension?
View 5 Replies
View Related
Jun 10, 2013
my client is having an issues when she opens AutoCAD Arch that the attached image shows up...
I have never seen this before, but then I did not do a lot of customizations
View 3 Replies
View Related
Aug 15, 2012
I am now looking to work with custom iProperties that will populate our company's new BOM standard. I have not done much with regards to customizing a BOM (I've always used the generic fields). Now my boss has come to me and wants to use the following headings for our BOM....
REF ID, QTY. , DESCRIPTION, SHAPE, SIZE, LENGTH, MASS, TOTAL LENGTH, TOTAL MASS, COMMENTS, REF. DWG.
REV., REV. DATE
While I understand some of these fields will require the user to manually type information in (Comments and Ref. Dwg.) The others, from my understanding, can come straight from iProperties or Parameters. I am running INV Pro 2013.
View 1 Replies
View Related
Oct 4, 2012
Is there a way to customize the BOM columns so that Inventor remembers which columns I need? I know that I can add in the file name column etc. but I use the same columns over and over. I find myself in every assembly adding these columns in.
Autodesk Inventor Professional 2010
View 2 Replies
View Related
Sep 28, 2012
I'm trying to do a customization of the Bom structure to obtain a new custom column "Qty*x" (where "X" is a number).
I need this because in my order I have multiples of these items.
View 1 Replies
View Related
Aug 1, 2013
On older versions of Acad, I was able to go into the .mnu file and do a macro such as follows:
***POP10
**LIB2
ID_MNLIB2 [&Lib2]
[->Bolts]
[->Bolt ****'y]
[#10]^C^C-insert;F:/STD/LIBS/BOLT-01/BOLT010A;;;;
[* 1/4]^C^C-insert;F:/STD/LIBS/BOLT-01/BOLT025A;;;;
[5/16]^C^C-insert;F:/STD/LIBS/BOLT-01/HH031A;;;;
[*3/8]^C^C-insert;F:/STD/LIBS/BOLT-01/HH038A;;;;
And a new pull down menu would be created and my listing of bolts could be inserted from the std libs bolt file as I clicked through the route. I developed all of this on older versions at a different company. With 2014, I went to the CUSTOMI ZE under the main Drafting and Annotation / AutoCAD Classic pull down and created a New Menu, renamed to BOLTS and then pulled the INSERT command and dropped it ontp the BOLTS pull down and changed the DISPLAY NAME to 1/4" and edited the MACRO from ^C^C _insert to ^C^C_insert;F:/STD/LIBS/BOLT-01/BOLT025A;;;; Seemed to work fine....until I added another 10 bolt assemblies and then noticed that they all showed up as whatever the last bolt I had put in the Macro line was. The display name stayed correct but the insert was gloabally changed on all pull down to whatever the last item was. I have reset 2014 back to the original settings now to clear out everything I had done.
View 6 Replies
View Related
Feb 9, 2012
I have been working on creating custom content center families that will populate our company's part numbers and descriptions into the browser and drawing BOM. I have been quite successful in this except with the material. I've created custom materials for the fasteners that have the specified strengths and finishes per the fastener. By doing this I've created a different problem.
How can I create a custom property that will insert a specified value for material into the BOM? I've tried to change the link for Project.Material and then the part inserts as Inventor's default. I don't think creating individual material styles for each fastener is a viable one since I'll end up with duplicate style names.
IV 2012
Running on:
Windows 7 64 bit
12 GB Ram
Intel Xeon processer
View 3 Replies
View Related
Jan 16, 2012
Is it possible to have the area portion of the PROPERTIES PANEL display Acres instead of, or in addition to, square feet for a closed object? If so, how to I accomplish this?
View 1 Replies
View Related
Aug 29, 2012
I have created a drawing from the parametric model assembly where i have clevis, lug plate and pin arrgt.
the model has been generated using the input excel spreadsheet where i have given the inputs like clevis thk, lug thk,pin dia etc.,
while creating the drawing partlist i have included the column of clevis thk, lug thk etc., using the iproperty, but these columns are coming separately, i just want the thk of clevis and lug in the same column so that i will make Bom for the assembly.
How to get the parametric inputs in the same column of the patlist in drawing.
View 2 Replies
View Related
May 6, 2013
how to load .NET project dll file in AutoCAD LT for customization ? Because in plain AutoCAD command is there named NETLOAD to load DLL file but this command is not working in AutoCAD LT.
View 1 Replies
View Related
Jun 14, 2012
I am using civil 3d 2012 and i want to use rail assembly for my single track rail project. i want to know how can i customize my assembly. As in given defaulf assembly i can keep the width of sub base same on both side of track centerline. But my requirement is to use different widths on left and right side of centerline of track.
View 1 Replies
View Related
Oct 22, 2012
im using acad 2010 in work and in home. i want full sync of all the customization i'vei made in both sides. itried to use a cloud service like Dropbox, i copy and paste there all the supportfiles and i set the path to there inboth machines but for some reason acad wouldn't use it.
View 9 Replies
View Related
Nov 25, 2008
I need to add weight to my parts list and notes for both parts and assy. Is there a way to get the weight parsed out from the model without the "lbsmass", just the pounds number no nomenclature I have a couple of other questions on parts list customization also. Also are these better questions for the customization group?
View 2 Replies
View Related
Apr 23, 2012
How to do the Properties window customization as shown in my attachment.
View 1 Replies
View Related
Nov 27, 2012
unable to load customization file:
c:usersdantappdata
oamingautodeskautocad mechanical20152
18.2enusupportacetmain.cuix
that customization group already exists.
I have two boxes here where something seems to create a acfusion.cuix, an aliasconcept.cuix and a acetmain.cuix. If I unload them and restart, I dont get the error but the have been created. Could a startup lisp be creating these? I havent done anything with lisp files. the target in the shortcut doesnt seem to be pointing to a lisp file.
We dont need these cuix files how can I stop them from being created on start up?
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
View 3 Replies
View Related
Apr 7, 2012
I've been using ACAD LT 2013 successfully, until the message started flashing on my screen "Sync Error, A customization sync error has occurred" It does not allow me to turn it off.
View 3 Replies
View Related
Jun 26, 2013
Earlier I`ve used a simple code from Rob Cohee to update the title blocks and it works like a charm, however, now I would like to try to kick it up a notch.
If (ThisDrawing.ModelDocument Is Nothing) Then ReturnmodelName = IO.Path.GetFileName(ThisDrawing.ModelDocument.FullFileName)iProperties.Value("Project", "Part Number") = iProperties.Value(modelName, "Project", "Part Number")iProperties.Value("Custom", "Client") = iProperties.Value(modelName, "Custom", "Client")
I`m working with several similar projects where the Inventor models and IDW`s is copied from one project to another. A typical project can consist of 50-75 drawings and the only properties needed to change is Client, project number and drawing number (consisting of the project number and a suffix, ex 123456789-125).
I would like to try to make an .ini file with these 3 properties in the root of the project folder so they can be changed and updated easily.
View 3 Replies
View Related
Jun 6, 2012
I've been forcing myself to accumulate to the new marking menu and gestures system. I'm starting to get used enough to them to see that it's really worth it.
I've found that the defaults are crap for what I do in IV, which is fine because I can customize it to whatever I do use.
However, when I RMB on a component pattern it displays a unique menu for which there appears to be no option for under customization. I'd really like to replace the craptastic useless options with things that I actually use.
By the way, why does AutoDesk neglect component patterns so much?
View 4 Replies
View Related
Feb 13, 2013
I added the Layer group (On / Off Freeze Lock / Unlock and Layer name) to the Quick Access Toolbar. I only see the first part name of the layer. Is there a way to stretch this part of the group in the QAT tool bar so I can see the more of the layer name? The partial name and layer color may be a sufficient clue as to the whole layer name over time. Would be nice to see the whole name until then.
View 1 Replies
View Related
Jun 21, 2013
Question regarding view labels in drawings.
I want to change the appearance of the view label to look like attached snap shot. Is this possible? I have looked through the inventor settings but cant find any options.
As a possible solution I can always create intelligent symbols which update with the drawing (like the standard view labels) but before I begin creating these I wanted to check if there was any other way?
View 3 Replies
View Related
