I just downloaded SP1 to mi Autocad Civil 3D (spanish), but now when i try to order some objects behind others it shows "Comando BACK no reconocido..." (Command BACK not recognized), i have tried to repaired the installation, reinstalled, unistalled and reinstalled, and the problem stills, so i guess it was the SP1 that change the language pack.
View 4 RepliesWhen I have an object selected and I want to de-select said object, I typically right-click and select "deselect all" - I have Autocad 2013 and it is telling me that this is an unknown command.
View 9 Replies View RelatedIf I type in refedit, wipeout, match properties, properties and quite a few others my command line reads Not Recognized! I can't live withour these comands! Not sure what I did, it happend yesterday and I was getting hit by all sides.
Added note: it doesn't seem to mater how I try to get to these commands i'm equally hosed if I use short cut, spelled out, on the ribbon, right click. . . . .access denied.
I still have use of line join edit etc.I don't know if this is related but 2012 dosn't seem to remember settings like if you check the double click to edit in options save work space after the next day it is back like it was.
So I'm in the process of upgrading a project from C3D 2011 -> 2012. As a part of the upgrade process I'm doing some drawing cleanup such as purging unused layers/objects, purging regapps, deleting unused scales and finally taking advantage of the Styles Manager in 2012 and purging unused styles.
However, I'm noticing that almost all of my styles are coming up as "unused" unless they are attached to drawing settings, even though there is clearly objects in that drawing using those styles. I noticed this was happening when after running a purge my road profile lines were disappearing because the style no longer existed.
The items that have styles attached are DREF'd into the drawing and are not "live" objects in the drawing, if that makes any difference.
I still having this issue: in Civil 3D 2013 spanish, after intalled SP1, draw order commands (right click > draw order) get a message " command not recognized"
View 3 Replies View RelatedI'm tweaking out dwt file and I am noticing that the default lable and pipe style I have set in the network defaults is not being honored.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I think this question should be so easy to answer, that I am feeling a bit foolish for asking, but here goes. I am trying to set my pressure pipe catalog, but when I browse to C:ProgramDataAutodeskC3D 2014enuPressure Pipes Catalog and hit open, I get a dialogue that states "There are no Pressure Network Catalogs in this folder". I have tried selecting folders farther down the list (Imperial, Imperial_AWWA_Flanged, etc) with no success. I have opened the sqlite files using the Content Editor, and I can see all the parts and sizes there. I just can't figure out how to open the catalog from Civil 3D.
C3D 2014, SP1
Dell Precision T3500, Windows 7 64-bit
I have not used Transparent Commands in a LONG time. I'm working in Civil 3D 2012 now. Where are the Transparent Commands?
I would like to dock a toolbar of all the Transparent Commands so they are easily accessible no matter where I have navigated to in the Ribbon.
Civil 3D 2012 has the DumpStyles DU command. What is the opposite? I want to write the exported styles into a fresh drawing. Overwrite options would be spectacular!
View 3 Replies View RelatedNo command will work from the Ribbon. I've changed workspaces and tried a backup CUI file. Is my system corrupt or is there some setting that displays the ribbon, but disables the commands within it?
View 2 Replies View RelatedI have been looking all around Civil 3D 2013 for the "group" command and cannot find it anywhere! I had it in 2012 and previous versions (and added it to the quick bar).
View 3 Replies View RelatedI have always used the "XLIST" command to name the layer of x-refed objects. However, when I now enter the command, it says "Unknown command 'xlist.'"
I imagine this is a customization file issue?
I have some dimensions and mleaders that are in paperspace that I want to put in model space. When I use the CHSPACE command, the mleaders will switch, but the dimensions will not. Is there a reason dimensions cannot switch space? This is in Civil 3D 2010.
View 5 Replies View RelatedAny issues when copying certain object within my drawing from one part of the drawing to another, after selecting the objects I want to copy, I select the destination point and I cannot see any of the objects that I am copying, the command stops working and then I cannot see any objects in my drawing at all....its like I am zoomed out all the way and nothing is in my drawing...I save the drawing as is (seeing nothing on my screen)...calling it up again and all my linework, etc. is there again...it has happened in two different drawings so far within the last few months, and these dwgs. are not linked to each other at all....
View 2 Replies View RelatedI have created a corridor and would like to use the drive command. After choosing a featureline and then ETW, the response is "Selected path is not supported. Please select another path".
View 1 Replies View RelatedI got the first attached message regarding UNDO command which I ignored. The second attached message then came and my UNDO command was frozen. I lost a lot of work done after I have shut down and restarted my computer.
Who knows what I should have done after the first or the second message?
Since the AeccLandFeatureline object doesn't have an offset method, how is this done? All I can think of is to convert the F/L to a LWPolyline, offset the polyline, create a new F/L from the offset polyline, set the new F/L elevations using the SetElevationsFromOffsetSource() method, and finally raise/lower the new F/L using the RaiseFeatureline() method.
View 8 Replies View RelatedHow or where do you set the default value under the Edit Command Settings for, say, AddContourLabeling? Right now it is saying that I'm overriding the default to our company standard, but I want the default to be the company standard not the "Standard" style. This goes for all command settings. I'm sure the default is set somewhere.
View 2 Replies View Relatedit does not showing command window in civil in 3D 2011 after installing first time.How can i get it?
View 5 Replies View RelatedI would like to know if there is a lisp that would run every time I run the hatch command? I have autosave on, but I never remember to do a good clean save before I run hatch. I remember as autocad locks up and crashes! I would like a list that would prompt me to save when I hit hatch with option of yes, save or cancel. is this a tall order?
View 9 Replies View RelatedI've got an issue where I will be drawing a pline in model space and use the roller on the mouse to zoom out and it automatically switches me to paper space. Is this a Civil3D issue or a mouse issue?
View 2 Replies View RelatedEverytime I use the label line command, when I go to plot my drawing I see a box around my label and the label is either chopped off or missing. A rectangle prints out around where the label is.
View 9 Replies View RelatedWhen I first created my surface model, any point I moved would snap back to its original position like a rubber band. I had to do some edits so I unlocked this by .... Survey Tab>My survey database>Survey Points>Points, and then picked "Unlock In Drawing". This command unlocked All points in the drawing so I could edit them.
Now that I am done with my edits, how do I reverse this command globally, so as to get ALL points locked again (so they snap back to their original position like a rubber band if moved, like before) ?
With Autocad 2013 we have found an unconsistant problem with overwriting PDF files with same name. This only happens with publish command (ie, can just plot 1 layout to pdf and overwrite no problem). The funny thing is, it doesn't happen all the time - just 50% of the files (and yes, the file is not in use when attempting to overwrite).
View 9 Replies View RelatedSite layout has moved and rotated a little. Have spot elevation labels in my sheet but unable to use align command. Align command is able to be used but only moves labels rather than move and rotate.
View 9 Replies View RelatedI am trying to copy objects from an xref, and when I select the objects from the xref, they appear to the side of where they are actually located. So, effectively, if I want to place the objects in exactly the same spot where they are in the xref, I have to try and eyeball it, or take the additional step of moving them into place, which is becoming very time consuming.
View 8 Replies View RelatedHow to label the intersection of the alignments for 3D 2012. This command will label the station equation between alignments automatically.
View 1 Replies View RelatedHaving trouble with the display order command? It does not work when you right click or when you type in the command. It says command unkown.
View 1 Replies View RelatedI can't remember the command to turn my color image to bitonal to us my line follower in infrastructure suite.
View 8 Replies View RelatedI have the command line in the upper left corner as a floating window which auto hides. Its not clickable, dragable, nothing. If i reduce the C3D window it is still locked to the top left corner of the screen on top of the windows desktop.
COMMANDLINEHIDE doesn´t refresh the situation. I just want my commandline back on the bottom.
Yesterday I was cruising along as normal when all of the sudden my escape key stopped working. I believe it happened after I accidentally loaded the dbconnection manager or something similar but not sure. When I envoke a command, the escape key does nothing. When I select something and hit the escape key, it doesn't deselect everything. I know it's not my keyboard because I'm using a laptop and both the attached keyboard and the keyboard on the laptop function the same in that the escape key doesn't work. I also have a Logitech Performance MX with a button set as the escape command and that doesn't work. When I type in cancel or ^c^c, the response is "unknown command".
View 9 Replies View Related