I have some dimensions and mleaders that are in paperspace that I want to put in model space. When I use the CHSPACE command, the mleaders will switch, but the dimensions will not. Is there a reason dimensions cannot switch space? This is in Civil 3D 2010.
View 5 RepliesMy company upgraded our AutoCAD from 2007 to 2009 this past Monday. I'm getting an error message when trying to change the order of objects in model space.
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
I want to be able to change the line space factor for a label similar to MTEXT. Is this possible?
View 5 Replies View RelatedI am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View RelatedWe just installed 2013. I'm in a layout tab, a AutoCAD/C3D keeps kicking me out of model space into paper space.
View 3 Replies View Relatedwe have a strange problem showing up here on Autocad Architecture 2014 on Windows 8: We use the "space-bar" to confirm a command or shortcut. After start of AutoCAD everything seems fine but suddenly a hit of the space bar is interpreted as two hits:
Line <space>
Specify first point:
Specify first point:
Specify next point or [Undo]: [cursor ready for next point]
No chance to point the "first point". It is either 0,0,0 or the last coordinate.
Using the <Enter> button (or selecting an icon) is working as expected / normal but very unhandy because on the right side of the keyboard.We tried different keyboards but this is not a hardware problem!
I navigate (all functions, pan zoom, etc) with my space explorer in autocad architecture 2011 any autocad command will be cancelled by the 3d mouse. when use the 3d mouse, the cursor in autocad changes to the default windows cursor display. I have an updated version of autocad 2011 with all of the service packages and hotfixes, the space explorer software driver is up to date too, windows 7 ultimate x64 is updated too.command line example:
Command: _line Specify first point: "I move the 3d mouse" Specify next point or [Undo]: *Cancel*
Command: *Cancel*
I tried reinstalling both autocad and 3dconnexion, restored the default settings of the 3d mouse. I also shutdown the logitech mouse software to make sure it was not interfering with anything. I also double checked that it was not a display refresh issue with the graphics card or the display settings for autocad, I also played with the profiles in the 3dx sofware.
I installed Aucad Architecture 2012 and same freaking issue. The only way to solve it "half way" (so not a real solution) is to change the visual style to other than 2d wireframe, but when doing so, whatever object you are manipulating seems to freeze on the screen and doesn't refresh untill you move the mouse (normal one), basicaly the manipulated object doesn't zoom with the rest of the objects in the screen.
This is very anoying since the purpose of these stuff is to create an uninterrupted worflow not the complete oposite!! this mouse is worth around 200-300 dolars and Autodesk took responsability for it's drivers!! and it doesn't work!! it's faster to work with your regular mouse. Also you should develop the driver version for the Autocad Mac version.
We are running AutoCAD 2011 and 2011LT on Windows 7 with 12gb of ram and a NVIDIA Quadro 4000 video card.
The problem did not happen to often when we were on XP, but now, whenever we're in a command, the screen jumps as if snaps were turned on with 1/2" spacing. We've tried upgrading the drivers and graphics cards as well as installed all updates I could find. We make sure drawings are purged and audited and Layer manager IS NOT kept open.
How to have “window” selection when using the “adjust space” command?
I’m wondering if there is a way to select all the dimensions needed to be adjusted in one go instead of selecting them one by one.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I'm looking for a lisp that will allow me to switch from Model Space to Paper Space and vice versa.Looking for another option other then the "Quick View Layout/Drawings".
View 6 Replies View RelatedI used the command qselect to select all mtext in model space. I then went to the properties menue and changed all mtext to 1" height.
I've got five pages, each with a different viewport. Each viewport is the same scale as the previous one however the text size is not.
Mtext was created under the same style.
I have a room with a cathedral-style ceiling. I'd like to create a freeform space. What's the secret? I've changed the properties from extruded to free form, and then selected the boundaries (floor slab, ceiling slabs & walls), then hit "G" to generate the space. The command line reads no space generated.
View 2 Replies View RelatedWhen I create a new document in AutoCAD, I get a weird gap of space right above my command bar that either displays a duplicate of the command bar or just blank white space. It is as if the comupter does not recognize it as part of the screen. My mouse will jump over the bar and I cannot type or select anything inside it.
View 3 Replies View RelatedI'd like to change a layer's color from command line because of a user icon. I figured out from previous topics that I should use macro similar to this: ^C^C_filedia;0;-la;s;Verdeckt (ISO);c;1;l;dashed;;_filedia;1;re;
(I want to use this macro to change layer's linetype, too, but that's not the point)
The only problem with this macro: layer's name contains a space therefore Autocad tries to recognize Verdeckt as a command (and macro interrupts there) instead of setting Verdeckt (ISO) as the current layer. I've tried using different quote marks, none of them worked (' and " and <>). I hope there's a method for entering a parameter that contains space.
Software: Inventor Series 2011 SP1 x64
OS: Vista Business x64
CPU: E6400
RAM: 2*2Gb GeIL
VGA: Quadro FX 550
I am trying to work on a previous file in my office, and when it opens on mycomputer, it does not display as it should.
In general, the purpose of the project is to reinstate the side slopes of a road abutting a river. Cut & fill sections have been generated on 20m station increments along the road corridor/surfaces in order to calulate cut and fill as well as to reference the design to flood levels.
When I open the file, all of these sections (and there are alot) have relocated themselves to various locations in model space, none of which are aligned with the viewports that are being used for printing.
Could it be software and/or hardware incompatibility with the computer they were originally created on? (I believe it was created with C3D 2010, or C3D 2011 - I am currently running 2012)
I am using cs6 with windows 7 professional. The hand tool is not working when using the space bar.
View 2 Replies View RelatedI have a small application that zooms on an entity with specific properties. The problem is that if I am in paperspace and the entity is in model space, i cannot see the entity. How can I make the entity's space to become the current space?
View 3 Replies View RelatedTypically, I've mistakenly inserted some annotative leaders into a viewport modelspace instead of paperspace. Trying CHSPACE to bring them into PSpace makes them disappear - can't find them anywhere. Normal objects work fine.
View 2 Replies View RelatedI'm using autocad 2007:
I draw a detail 1 in model space and put dimensions on it say at a overall scale of 1.00, now I draw a detail 2 and change the overall scale to 5.00 and put dimensions on that detail but when I look at detail 1 all my dimension have changed to the 5.00 scale. Where I'm changing the scale is under the tab Format/Dim. Style/Modify/Fit/use overall scale of ..... How can I keep the dimensions from changing when I change the scale this way? I know it can be done because I've work on several dwgs. and changing the overall scale doesn't change on every detail in the model space.
Any way to change that background in which we create models. Someone said that Autodesk knows better than the users so we have a choice between drab grey and depressing grey.
I am using AC 2014 and I still cannot find a way to change that background.
I have a VBA program that I have been using for years that I am unable to convert to vb.net. When I start a text/dim command, the routine changes my layer to my Dimension layer, like wise when I create a viewport.
I like what I see with A2k12 but all this vb.net stuff has me quite frustrated. So many programs to convert so little time.
Is there a way to change the key-in for "Copy" to "C" and then "Circle" to something else?
View 9 Replies View RelatedHow can i change the radius og the command fillet in autocad mechanical 2011?
View 2 Replies View RelatedIs there any way to change the paper space(layout) background color?I do not mean the sheet color, but the rest of the space.
View 3 Replies View RelatedI need to change the hatch size (not the pattern scale or space, juste the hatch size).
Exemple : I have a circle, and a hatch inside the circle. The radius of the circle is 10, so the radius of the hatch is 10 too.
What i want to do is to make the hatch smaller (or bigger) like this : Circle radius : 10, Hatch Radius 5 (or 15).
My first idea was to recreate a new circle with radius 5, and a new hatch inside and then erase the second circle. It works, but not very effective in my case.
So, it's why i came here to ask if there is any solutions to make this faster, easier, without having to recrate another hatch, another circle...
How I would change both the model and paper space thickness of a line in AutoCAD 2004? I've tried changing "line thickness" and "line weight" in the properties dialog box but it doesn't seem to matter whether it's 0 or 9,999,999 or any number, it just looks the same, in both the model space and paper space views.
I have a drawing someone else did that uses polylines of different thickness so I have tried to figure out how they did it. Again, looking at the properties dialog box it seems to make no difference what I set the "line thickness" or "line weight" properties to...the line just stays the same size regardless.
I want to change line thicknesses because I'm designing a surface water pipe layout...I want the pipes to be a lot thicker than the lines that represent the actual building so that they will stand out when I plot the drawing.
Can I change the LTSCALE in paper space and in model space interchangeably?
I am struggling with the batt insulation big time. I get it looking perfect in paper space and then I go to model space and move a piece of batt insulation and then when I go back to paper space the LTSCALE of the batt insulation has changed. It's really weird. Batt insulation is killing me. I set the LTSCALE globally as well as each individual batt insulation but it keeps changing without me messign with the LTSCALE. Killing... Me...
I need to programmatically change the 'Window command' (Commande de fenêtre in French) color. I didn't find anything in Application.Preferences neither in the registry.
By 'Window command' I'm talking about the feature comming with A2012 displayed in the upper left corner of model space windows:
I have a drawing that was drawn in 3D CAD and I need to convert to 2D CAD. I changed the view, but I cannot remember what the command is I need to type in to change to 2D.
View 3 Replies View RelatedHow do I change the default value of the angle that is between <> in the command UCS
"specify rotation angle about X axis <180.00>:"
from 180.00 to 90.00
At one point I had a layer command that I could select a line, type in the layer I wanted (with no extra prompts required) and it would change. The best part is if the layer didn't exist it would automatically create it (without prompting me Y/N).
Using LAYMCH in the command line is very close. However I have to press N for name, then enter the layer. If it is a new layer, it prompts me Y/N.