AutoCAD 2010 :: How To Convert Solid To Polyline With Mechanical 2010
Nov 8, 2012
I'm using AutoCAD Mechanical 2010 and received a .DXF file that contains 'solid' objects. Unfortunately the next tool in my workflow doesn't understand 'solids' only polylines (and a few other basic shapes like circles, lines, etc). Is there some way to convert the object in AutoCAD?
I tried the 'boundary' command but when it asks to 'Pick Points' and I click inside the solid, it always gives the error 'Valid hatch boundary not found'.
I've had a problem for a while now trying to extrude a 3d polyline into a 3d solid. The polyline is on different planes which is one cause of why it won't work. Instead of extruding into a solid it only does the sides making it a mesh rather than a solid. If its on one plane I know it will work.
I have polylines and changed the width to 3/4" and now the Plines are not solid (filled like a hatch) anymore? They are splined as well. I must have changed a setting somewhere and did not know it. AutoCAD 2012.
I am some trouble working with 3dface. I want convert 3dface to polyline but in some cases I faces with problem that a 3dface don't convert surface or solid.
i have recived an igs fle which i imported into auticad 2012.when imported the and saved as an .dwg the model is in surfaces, im looking to convert the surface to solid so i can export the file as an .stl for 3d printing. is it possible to convert this?
I'm creating an iPhone 4 case so it has a logo on it for my teacher. I got the case from thiniverse. It was a polyface mesh. i tried to subtract from it but it didn't work. I tried convtosolid but it didnt work. I exploded them and selected the outside shell and extruded all of the objects inward. Then when i tried to union them together, some of them would union, but not all of them together. im trying to export it as a .stl so I can use it with a 3D printer...
I needed to prepare a Map in which certain area has to be marked out. I did with hatching spending hours on it. But i need to convert it into solid colors. Is it possible to convert them without repeating whole procedure?
I have received a drawing drawn in a polyface mesh and I'm trying to convert it into a 3D shape in order to determine the volume and surface area of the shapes.
I just started with Autocad and I got a problem with creating a solid. The file is attached and as you can see I managed to make the form as a Mesh but from that point I can't convert it to a solid.
I have users using AutoCAD 2010 - both Architecture and Mechanical. My questions; are the Callout tools that are available in Architecture also available for Mechanical? I am looking to see if we can find the same toolbar(s)?
I have code that works just fine in AutoCad 2010 (just plain ol' AutoCad), but will not run completely in AutoCad Mechanical 2012. The code will draw lines, arcs, circle, plines, etc. as well as insert blocks. The command to insert the block has the entire block path so I don't have to rely on setting that up for everyone.
In AutoCad Mechanical only the blocks show up. No lines, arcs or anything else is drawn. I do not use a command method (like in LiSP) to create those objects, I create them through the block table and block table records.
What do I have to do to get my code to run in AutoCad Mechanical 2012?
Even though I run the Dwgconvert function in DwgTrueview 2012 I still can not open the converted file in AutoCAD Mechanical 2012 SP 2. Fatal error with some hex memory addresses displayed. DwgTrueview opens and displays the dwg. just fine. AutoCAD R14 & 2000 open the file with no problem as well.
I have been using background masking in Mtext to cover up the mechanical piping in our drawings. It works fine in AutoCAD, but we convert the drawing to pdf and then send the pdf to the printer to make prints. Now
the background masking is not working. You get a line going through the text.
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
How to get the individual polyline length of the entire drawing as per the name of the line written against him in the excel sheet. That would prepare the Bar bending schedule quickly.
I created a polyline and I cannot, for the life of me, remember the command to make it a 3D line, aka: pipe. I need to make a 4" pipe follow a line I drew.
How to automatically set the corner bend radius of a sweep along a 3D polyline?
The attached image shows what I did in a different program, but need to repeat with AC. The swept 3D object is moved off its path in the attached image.
Any command or lisp that will do new pollyline between two polyline on 1/3 or 1/4 space between them.
I need something that would be faster, use measure on pollilines then i draw between horizontall polylines on verteks or point new pollyline and ther divide it on 4 or 3 parts.
I have a sinusoidal curve, that I've created using a third party app, which has worked really well. But the app only produces the form in a straight line and i now need to fit it to a number of curves.
I have a form of 3 radii and a couple of flats, which the sinusoidal form needs to fit along. All this work is just in 2D as i need to output the dxf into a CNC machine.
I drew a very complicated 2-D plot this afternoon. The most majority of the plot is composed of different straight lines, arcs. Then I used the polyline function to join them together to form a closed single polyline (Modify->object->polyline).
Later on I want to change something in part of the polyline. Then I used the 'pedit' again, I chose 'open'. But the whole polyline won't break into its original segments. I tried through all the menus, just cannot find the right tool for this purpose.
Does it mean I have to start over from scratch to redraw the whole plot?
