i have recived an igs fle which i imported into auticad 2012.when imported the and saved as an .dwg the model is in surfaces, im looking to convert the surface to solid so i can export the file as an .stl for 3d printing. is it possible to convert this?
View 7 RepliesIs it possible to convert surface into solid in AutoCAD 2002?
For example, can I convert these five surfaces into a solid pyramid?
If yes, what is the step to do it?
We received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
Is there any way to convert a surface to solid?
View 4 Replies View RelatedI'm using AutoCAD Mechanical 2010 and received a .DXF file that contains 'solid' objects. Unfortunately the next tool in my workflow doesn't understand 'solids' only polylines (and a few other basic shapes like circles, lines, etc). Is there some way to convert the object in AutoCAD?
I tried the 'boundary' command but when it asks to 'Pick Points' and I click inside the solid, it always gives the error 'Valid hatch boundary not found'.
What am I missing here?
I'm having a problem creating a 3D Solid from two 3dpoly lines. I'm attaching a script file which reproduces the two 3dpoly lines to use for the LOFT command. As you can see when running it, I have two closed 3dpoly lines which use exactly the same X,Y coordinates and differ only in the Z axis. I'd like to make a 3D Solid with these lines, which should be possible using the LOFT command... but I only get a surface around the 'sides'.
I needed to remove the .scr extension from the file in order to attach it, so to run it you need to replace .txt with .scr at the end of the filename. It's a standard ASCII script file. If someone prefers I can also give the coordinates of the 3dpoly lines as a post.
I'm creating an iPhone 4 case so it has a logo on it for my teacher. I got the case from thiniverse. It was a polyface mesh. i tried to subtract from it but it didn't work. I tried convtosolid but it didnt work. I exploded them and selected the outside shell and extruded all of the objects inward. Then when i tried to union them together, some of them would union, but not all of them together. im trying to export it as a .stl so I can use it with a 3D printer...
I'm using AutoCAD 2010 Educational version.
As you can see, the nature of my model forbids me from making a 3D solid using LOFT.
The top surface is consisted of 3D polyline and arc, which if "joined" will be become a spline.
The bottom surface can easily be joined into polyline.
If I loft the top and bottom, it'll only give me a LOFTED Surface, which is not I want (wanted a 3D solid).
How to permanently change the settings of the EXTRUDE command so my polylines, by default, will become a solid instead of a surface object?
View 5 Replies View RelatedI needed to prepare a Map in which certain area has to be marked out. I did with hatching spending hours on it. But i need to convert it into solid colors. Is it possible to convert them without repeating whole procedure?
[URL].......
I have received a drawing drawn in a polyface mesh and I'm trying to convert it into a 3D shape in order to determine the volume and surface area of the shapes.
View 9 Replies View RelatedI just started with Autocad and I got a problem with creating a solid. The file is attached and as you can see I managed to make the form as a Mesh but from that point I can't convert it to a solid.
View 9 Replies View RelatedAm trying to convert this pump into solid ?
View 6 Replies View RelatedI've got a fairly complicated polygon mesh that I turned into a mesh. No problem. Then I try to convert to a surface and while the geometry is accurate the isolines change dramatically. I'm trying to bring the item into Inventor so that I can have a clean surface to work from. Unfortunately I get what you see in the picture. The top left is before converting to a surface. Bottom right is after.
View 1 Replies View RelatedMy problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
How can I convert a surface body in a solid body?
I attach my file.
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedI have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
I would like to know how can put planar surface to solid object which surface is curved like cylinder for example. When start draw from first point rectangle of planar surface follow x cordinate not that solid object. How to do that simply?
View 9 Replies View RelatedHow can i convert some solid bodies to a single solid.
View 8 Replies View RelatedHow can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
Is there a easy way to make this into a solid.
View 5 Replies View RelatedI have created a model, by lofting a shape along a curved spline path. The model properties is currently '3d Solid' what I want to do is generate a 3d Face off of this model.
I have exploded the 3d model and that gives me a surface, bu the dilemma is that I do not know how to 'trace' or turn this surface into a 3d face format. What I was thinking is that if the surface could be exploded into individual elements I would be able to draw over the surface with the 3d face tools and then have my model, but a issue with this is that I cant explode the surface into elementary elements AND the 3dface tool cant generate curves.
In short how to turn a 3D model into a 3D Face or a Surface into a 3d Face?
The program I am exporting the model into accepts the following:
DXF Entity SAP2000 Objects
1 POINT Point
2 LINE Frame/NLink
3 3DFACE Area
4 3DPOLYLINE Solid
5 CIRCLE Line(s)
6 ARC Line(s)
Note: To be able to import the dxf entities as solids in SAP2000, you must draw them in AutoCAD as meshed polygons or meshed solids. I could also export the model as a solid but again do not know how to get a meshed polygon or meshed solid from my 3d solid, when I do mesh smooth, the model basically turns into a rectangle and looses its detail.
As you can see it is number 3 I am working on. I have managed to create simple 3d faces and get them into the program but the 3dface tool is very primitive and I cant see how I would create the curves that my model has, I cant seem to form a grid system either to use the 3dface - everything seems to draw in space.
Can I hatch a 3D solid surface? Do I have to create a 3D face on top of it beforehand?
View 7 Replies View RelatedI have asked to amend a drawing, which consists of lots of square tube sections and other stuff, however I have received it in IGS format. I have got it to open in AutoCAD by first opening it in Inventor, then using the 'Save Copy As' command to save it as a DWG. However, instead of it consisting of solid tubes which I assumed it would be for me to easily amend, it's all surfaces.
I can't find a way of opening it as a solid model (maybe the file type doesn't allow it anyway), nor can I seem to convert any of the surfaces into a solid.
I have attached a sample tube from the drawing, how to turn it into a solid? I am moderately experienced at solid modelling from scratch, but I've never come across something like this before.
BoxSection.dwg
I'm using ACAD 2014 Win8 64bit.
I need to slice a cylinder with a surface but the slice command keeps giving error " Inconsistent face-body relationships".
I created the surface from a solid that I created using solid intercept between the cylinder and another solid that the cylinder actually passes through (a housing I have). In my attachment I do not include the housing, just the cylinder, the solid intercept and the surface from the a face of the solid intercept.
I tried increasing the U & V isolines of the surface, and scaling it up so that it isn't bounded by the cylinder, but that didn't work.
I'm willing to try any technique that achieves the same goal - I need the butt of the cylinder to contour to the housing so that I can do a JOIN and have a solid housing with a cylinder sticking out of its face. The inside of the housing is hollow with a 0.05 inch wall.
PDS 2014/Win8 64/32GB RAM/256GB SSD RAID1/Asus P9X79 Deluxe/i7 3820/nVidia Quadro K2000D/Dual 27" LCD
I have a scanned model of a casting. It was necessary to delete surfaces to remove the casting flash from the model.
I have lofted/patched/stitched the missing surfaces to close the solid. Apparently there is a gap somewhere because the model remains as a surface instead of returning to a solid.
How can missing surfaces be found in the model?
What else can prevent the model from returning to a solid?
When stitching, the gap tolerance was set to .002". The model will "rebuild" without any error messages.
I am working on a project and have ran into a problem. I need to hollow out a currently solid surface in order for it to have a uniform thickness of 3mm that follows the curvature of opposite side. These pictures will show what I mean.
Top Side:
Bottom Side:
Basically, I need to hollow out the backside to make it fit the surface of the front side with a thickness of 3mm. Is there some sort of tool that is designed for this or another way of doing it?
I have created a surface in Civil 3D by adding contours....... Now that I have created the surface I need to Exoprt it to .sat / .stl files. But in order to do this I need a 3D Solid.
How do I convert this service to a 3D solid in order to the the export?
I have tried the thickening option in the 3D Modeling workspace but it doesn't want to accept my surface.
I have a model of a boat from some database. It's build from 3D faces but I would like to make it a 3D solid with a thickness of 3mm.
I can convert the faces into a surface, but i can't seem to get any of the two models into a 3D solid. I have tried thicken, convtosolid and a lot of other options without luck.
I was wondering if I could make two surfaces, one smaller than the other, place them ontop of eachother and create solid between them?
I'm having trouble trying to place a material onto a surface so that it aligns with the x-y coordinates. When I use drag and drop from the materials library and use ctrl to select one particular surface/face, the material drop s in fairly arbitrary.
I thought I could use materialmap to force it into a particular alignment and while I can use the commands to set the base point and alignment, the material does not update with the boxed alignment.