Illustrator :: Files Don't Show Up In Acrobat File List When Trying To Combine Files Into Single Pdf?
Sep 24, 2013Illustrator files don't show up in Acrobat file list when trying to combine files into a single pdf
View 9 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Combine Pipe Networks From Separate Files Into A Single File
Jul 16, 2013I need a way for 2 users to work on a pipe network at the same time. I was thinking about creating Data Shortcuts, but I’m looking for a better way to accomplish this. For example, can I export a pipe network created by another user into a master file? (which contains all my networks consolidated together). I want to work on one part of the network while another user works on another part of the network then combine into a single file so that I reference everything into our P&P sheets.
View 5 Replies View RelatedIllustrator :: File Options Show Hidden Files
Sep 27, 2012I'm having an odd problem in AI CS6, and I first want to try trashing my preferences file, but I can't find it (sounding dumb). When searching, I ran across references to user/Library/Preferences/Adobe Illustrator CS6 Settings/en_US/ but I can't find that either (sounding even dumber). I see users/ myname/ but no library/preferences. I try users/myname/roaming/Adobe/Adobe Illustrator CS 6 settings /en_us/x64 but nothing there gives me a file folder or a file named preferences (can't feel any dumber). BTW, I am using the file options Show Hidden Files and Show Extensions, and I'm running PC Windows on a 64-bit machine.
View 4 Replies View RelatedPhotoshop :: Combine All ASL Files To One ASL File
Jul 29, 2004Is there a way to combine all the ASL files in to one ASL file?
View 1 Replies View RelatedAutoCAD 2010 :: List Doesn't Show DWG Files
Jan 4, 2013When I first started, I noticed that EVERY time I started Acad (Civil 3d 2012 or Arch 2012), the MRU list showed nothing but DST files. If I opened a dwg, it would get added to the top of the MRU list. But then the next time I loaded acad, there would once again be no dwg files--just dst files.
I thought that maybe the profile where the MRU list is stored was being overwritten by a backup (maybe the mgmt here wanted to ensure the profile remained "standard"). But then I noticed that when I open a dst file that was not on the MRU list, it gets added to the MRU list and STAYS THERE when I close the Acad session and is still there the next time I start Acad.
Now the difference between my issue and the other thread (at least as far as I can tell), is that I think they're saying that as dst files are opened, the dwg file(s) get pushed out of the list. But most of the dst files I'm seeing in the list are there from before I started.
The other thread: [URL]....
AutoCAD Inventor :: Combine Separate IDW Files Into One Master File?
Dec 16, 2011Just wondering, if I have several seperate idw files and I want to combine them into one master file, is this possible? Would be handy to have all my drawing on one file instead of the 30 or so seperate ones it will become.
Inventor 2014 PDS
CorelDRAW Graphics Suite 12 :: Combine Multiple Files Into One Master File
Jun 12, 2007What is the fastest way to take a directory of individual corel files
page1.cdr
page2.cdr
page3.cdr
...
page 50.cdr
page 51.cdr
page52.cdr
and combine them into one single 52 page coreldraw file for printing/imposition.
Color Printing Forum : Print Directory
AutoCAD 2010 :: Combine Multiple Drawing Views Into Single DWF File?
Jan 29, 2012Can the Plot command be used to combine multiple drawing views into a single DWF file?
View 1 Replies View RelatedPhotoshop :: Eps Files->freehand->acrobat
Dec 28, 2004I save .eps files in photoshop 7.0., open them in freehand MX,
make a .pdf and some pictures don't appear in the .pdf
(but the old ones do). I tried the whole process (from scanning on) but it doesn't work.
I installed the new full versions again...
any idea about the export preferences or preview formats (freehand says it doesn't accept TIFF previews..!?)
Photoshop :: Adobe Acrobat Files
Mar 31, 2005I created a magazine cover in ps the saved in .pdf format I am wanting to a a few artles I wrote and saved to .pdf and combine the. Like Mage cover, index page , articles about 8 saved.
I want them all in 1 .pdf combined instead of having to dl multiple files.
Edge Animate CC :: Create Single File By Combining All Files?
Feb 15, 2013we are using adobe animate to make medical related flash type cards, we have completed our work BUT
problem is this when job is done edge animate created multiple files to including Scripts, images and HTML files, which becomes very difficult to upload on a server when we need to uplaod thousands of edge files on our site.
is their any way that all the files are compiled into one file? so it will become really easy to uplaod thousands of flash card. secondly, is their any way to encrypt all stuff?
AutoCAD .NET :: Add Single Resource Folder In Bundle And To XML File To Access Files In DLL
Aug 25, 2011I'm trying to get the autoloader working. [URL] .....
Looks like it's a 'fairly' new addition and dead simple but..
All I need to do is add a single resource folder in the bundle and to the xml file to be able to access the files in the dll.
How to modify the xml file and refer to this folder in the dll?
<?xml version="1.0" encoding="utf-8" ?><ApplicationPackage SchemaVersion="1.0" > <Components> <ComponentEntry AppName="DOTNETTEST2" ModuleName="./Contents/AutoloaderDotNetSample2.dll" LoadOnCommandInvocation="True" > <Commands GroupName="DevDays2010"> <Command Global="DOTNETTEST2" Local="DOTNETTEST2" /> </Commands> </ComponentEntry> </Components></ApplicationPackage>
I can't remember where I got the resource files from.
Here is the DevCast for creating the installer. [URL] ....
Also is there a way to change the path depending on whether or not you are debugging?
In VB6 I used a function
Public Function IsIDE() As Boolean 'Returns boolean value of True if not compiled IsIDE = (App.LogMode = 0)End Function
Illustrator :: Link Files Reference To Styles Of Single Master?
Feb 24, 2014Is there a way to link many Illustrator files (say about 200) to the styles of a single master?
The goal is to set up all of the 200 files in such a way that they can all be modified by a master setting. For example, I would like to control font size, line weight, etc. in this "master". It could simple be a file with settings or another AI file.
I would also need to "break the link" at some point (or just have it such there is not dependency that would make it unusable). That way I could disseminate each file without the need for the master.
Illustrator :: CC Show DXF As Text Files
Sep 10, 2013My Illustrator CC identify my dxf files as text files even they are valid dxf files as Acrobat or Rhino are able to open them.
View 2 Replies View RelatedAutoCad :: Combine All The Files Into One?
Nov 12, 2011I have multiple files in which i have i different drawings in autocad. Is it possible to combine all the files into one?
View 4 Replies View RelatedPhotoshop :: Best Way To Combine 8-bit And 16-bit Image Files
Jul 21, 2013I produce large photographic art prints by combining my own edited 16-bit RAW photo images with 8-bit stock photo images and 8-bit photoshop artwork. I used to just reduce my 16-bit photos to 8-bit and then edit my composite image as 8-bit, but I ran into banding and other problems in the color gradients I created later in my composite image.
I want my composite image to be 16-bit to get more accurate colors and better gradients. What is the best way to bring 8-bit image files into my composition and maintain best quality? Is it good to convert 8-bit images to 16-bit in PS before importing? I also heard about bringing 8-bit images in as Smart Objects?
VideoStudio :: Combine Files With Different Properties?
Nov 5, 2012I have three video files. Each has a different frames per second. Each has a different audio format. Each has different bit rates. One has upper field first, one has lower field first.
Im assuming that I cannot simply drop the three files into the time line and produce one output file (obviously with the lowest bit rate and fps).
Do I assume correct? and if so, how does one combine files with vastly different properties to produce one output file?
VideoStudio :: Split Single Video File Into Multiple Video Files?
Feb 13, 2011I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
VideoStudio :: X2 - Combine 2 MPG Files Into One Large Video
Apr 4, 2011I'm a new user to VS and need combining 2 mpg files into 1 large video.
I have 2 mpg files that I would like to merge together to create 1 large continuous video. The 2 mpg files are in a folder on my D drive.
AutoCAD 2010 :: Getting CTB File From 2007 To Show In List In 2011?
Jul 17, 2013Having no success in getting my .ctb file from 2007 to show in list in 2011. Is it compatible or will I have to re-write?
View 2 Replies View RelatedCorelDRAW X5 :: Combine All Pages Into Single Page
Aug 10, 2012I have 100 of pages of a clients logos, I want gather them into a single A3 page, normally we can do this thing by giving print command (Imposition tool in print preview) but we can get PDF output or can directly print it, but I require cdr, so is this possible? I tried making PDF and importing it into corel but most of logos not coming well bcz those are bitmap, some bitmaps are viewing as a horizontal sliced.
View 3 Replies View RelatedPhotoshop :: Combine Different RAWs From A Single Photo
Mar 27, 2006I'd like to combine two different RAW exposure settings into a single JPEG. I've done this in the past by importing two RAW files at different exposure values, then selecting from one photo, feathering, and copy/paste into the other photo. This proved to be very time consuming and no where near perfect.
I thought Photoshop CS2's "Merge to HDR" function would be ideal for automating this process, but it won't take the two different RAW imports as input because it knows they're from the same photo.
AutoCad :: Combine Two 3D Polylines Into Single Polyline?
Aug 29, 2012Is there a command to combine two 3d polylines into a single polyline? Either combine, take the mean between the two lines, or draw a third line at the mid distance between the two original lines?
The lines are created (in a .dxf) by a GPS unit in the field, and represent tracks needing to be mapped. Typically we would drive out a track and then drive back on the same track; this gives me two 3d polylines. Because of GPS errors it better practice to log the roads/ tracks twice. The lines can have from 2000 to 10000 vertices, so manually drawing is not an option.
Photoshop :: Get CS To Show Epson 3200 Scanner In List Under File Import?
Oct 22, 2013How do I get Adobe Photoshop CS to show my Epson 3200 Scanner in the list under File Import?
View 2 Replies View RelatedIllustrator :: CS4 View Doesn't Match View Of Same File In Acrobat
Apr 11, 2013The problem seems to happen ins CS5 and CS6 as well. We have a complex piece of artwork for a foil blister and we use a paragraph of text that has 3 transforms applied to which effectively step and repeat the paragraph of text in a repeat pattern across the artwork. This setup very precisely as it needs to be 100% accurate for print purposes as several units are printed side by side and the repeat runs across the units. Everything is setup correctly in Illustrator and then we re-save as a PDF with 'Preserve Illustrator Editing Capabilities' on.
We genearally save as a PDF 1.6 but we have tried all the combinations now. The file still looks perfect in Illustrator but when the PDF is opened in Acrobat (any version) the step and repeat (transform) on the paragraph of text is now no longer in alignment on onside of the artwork but still OK on one side. No matter what we do we can't fix this problem andit's recreatable each time. Also it's not file specific as we can build a new file and it will also exhibit the problem. We're only talking about a tiny jump here - <0.2mm but this means the artwork is out of spec.
Illustrator :: Linked PSD Files Not Found When Opening AI Files Via Shared Folder
Mar 17, 2013My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
Illustrator :: How To Set File Associations To Have EPS Files Save In CS4
Aug 2, 2012Problem: When using Illustrator (CS4), saved files as .EPS, do not have the appropriate Illustrator icon on the file. When I click on them to open, instead of opening in Illustrator, the file open in "Preview".
NOTE: ".AI" files saved, do not have the correct AI icon either, but do open in Illustrator.
What can I do to rectify this situation?
Photoshop :: Can't Blend Two Raw Files Into Single...
May 12, 2009I have created two Raw files with one focuses on highlight while the other on shadow. Within Photoshop with these two files open my intention is to use the Move tool and drag-and-drop one image over the other as a layer. At the present I am having trouble to get these two images to register as two layers.
View 7 Replies View RelatedIllustrator :: Batch Export Of EPS To BMP Files Creates Extra EPS / AI Files
Dec 20, 2012A simple action.
File>Export>.bmpClose
If I run the action on one file, it works perfect.
If I try to run it as a batch, it creates the bmp files fine.
But it also creates either a .ai file, or two .eps files!
Writing one or two extra files signifiantly shows the process down.
After I run the batch it is not hard to simply delete the extra .eps/ai files of course.
But writing those files seriously slows the process down, and I have about 89,000 more files to go.
Illustrator CS4. Windows XP
Illustrator :: Possible To Automatically Export Each Layer Of File Into PNG Files?
Feb 28, 2013Is there a way of automatically exporting each layer of an Illustrator file into PNG files, with the PNG files taking the name of their layer in the Illustrator file?
View 3 Replies View RelatedIllustrator :: CS6 (Mac OS) How To Keep Open File Minimized When Opening Other Files
Jan 30, 2014I work with several files at a time and it can become annoying when you open several files and a minimized file keeps opening after each one. I don't want to have it open in the background, I just want it to stay minimized until I'm ready to work with it.
View 2 Replies View Related