AutoCAD 2010 :: List Doesn't Show DWG Files
Jan 4, 2013
When I first started, I noticed that EVERY time I started Acad (Civil 3d 2012 or Arch 2012), the MRU list showed nothing but DST files. If I opened a dwg, it would get added to the top of the MRU list. But then the next time I loaded acad, there would once again be no dwg files--just dst files.
I thought that maybe the profile where the MRU list is stored was being overwritten by a backup (maybe the mgmt here wanted to ensure the profile remained "standard"). But then I noticed that when I open a dst file that was not on the MRU list, it gets added to the MRU list and STAYS THERE when I close the Acad session and is still there the next time I start Acad.
Now the difference between my issue and the other thread (at least as far as I can tell), is that I think they're saying that as dst files are opened, the dwg file(s) get pushed out of the list. But most of the dst files I'm seeing in the list are there from before I started.
The other thread: [URL]....
View 4 Replies
ADVERTISEMENT
May 2, 2012
Is there a way to modify the DEFAULT SCALE LIST to show a metric scale list in an imperial template? I mean, I start a drawing using the imperial template, but i want to use the standard metric scales on paper space. on previous versions the scale list shown both imperial & metric. Now it depends of what the template is using.
View 1 Replies
View Related
Mar 26, 2012
I recently downloaded in my new computer the version of autocad 2011, but when I type letters for the command list to show, it doesnt!
View 1 Replies
View Related
Jul 17, 2013
Having no success in getting my .ctb file from 2007 to show in list in 2011. Is it compatible or will I have to re-write?
View 2 Replies
View Related
Jul 2, 2013
I'm working on 2010, and I can't get the PURGE dialogue box to show up when using the PU shortcut. It will open if I type out PURGE completely, but when I type in PU, stuff just shows up in the command prompt. I even went into the alias-editor and made sure PU = PURGE. I've never had this issue before, but I'm on a new system because I started a new job. At my last job, we were also using 2010, and everything was fine.
View 8 Replies
View Related
Sep 24, 2013
Illustrator files don't show up in Acrobat file list when trying to combine files into a single pdf
View 9 Replies
View Related
Aug 5, 2013
Lightroom doesn't import my GPS data - it is there in the RAW (NEF) and jpeg files but doesn't show in the Metadata within Lightroom. Nikon View NX shows the data but I want to use Lightroom!
View 5 Replies
View Related
Mar 6, 2012
Lightroom 4 doesn´t show video files from my Nikon D5000.
It crashes: Load Library failed with error 126: Das angegebene Modul wurde nicht gefunden.
I have WIN7 64bit.
View 16 Replies
View Related
Jan 18, 2013
i'm trying to show the appearance of the part in a part list next to the column material and i can't find how to do it
Product Design Suite 2013
View 3 Replies
View Related
Feb 28, 2012
The following is the problem: I have an assy with multiple different frames. If I make a parst list in the IDW all the frame members are shown seperatey, I just want to show only the frames in de parts list. I tried grouping, but when two assy's are the same that doesn't work any more.
View 3 Replies
View Related
Sep 25, 2013
I have a few lists in my form. The first one decides what information the other lists should have, so none of the choices are the same. I should first add that I have the "OK, Cancel, Apply" option.
Is there any way that I can make the other lists update automatically when I chose something in the first one? The only time they update is when I press the "Apply"-button.
I have parameters and rules that decide what lists should be shown at what option from the first list so I don't think that is the problem.
View 4 Replies
View Related
Nov 7, 2012
Custom Hatch list in ACA 2013 (64 bit win 7) shows the list of hatches in a completely random order..ie. not alphabetical.
View 9 Replies
View Related
Dec 15, 2010
How do i show and close the parts list iso-main menu with code?
View 1 Replies
View Related
Apr 11, 2013
My customer is having trouble with the part list feature inside the Inventor 2D drawing.
For example, He has a car assembly file with 4 wheels and alot more subassemblies, then he creates a view representation which only visible for 1 wheel.
When he generates the part list in Inventor 2D drawing, he go to part list >filter setting and set to ‘’Assembly view representation’’ but the quantity for the part list is still showing as 4 as per attachment.
change the value manually inside the part list table?
View 5 Replies
View Related
Aug 29, 2009
I just got a new Logitech wireless keyboard and mouse (MX 5500 Revolution) and I can not pan with the mouse. I love this wireless set up and it was a birthday present so I dont want to just get rid of it. I have the VX Revolution mouse at the office and have no problems with it.
View 9 Replies
View Related
Nov 26, 2013
Everytime I go to 'save as' the dialogue box does not show. All that it will do is ask me what file format I want and to type in the path (see pictures).
View 4 Replies
View Related
Feb 12, 2010
I am having trouble with getting certain pieces of text to show up in my viewport in paperspace. There is text and linework on the same layer. However, only the linework shows up in paperspace, not the text. I have seen this before and don't remember how to fix it. It is a setting somewhere but I don't remember where.
View 7 Replies
View Related
Feb 27, 2012
This doesn't work:
oPartDocument.ComponentDefinition.WorkPoints.Item(2)
All I have is one item. (Center Point)
View 1 Replies
View Related
Apr 8, 2012
I am working with files that somebody else did, I need to bring an external reference and it dosen't show up, then I check on the ref command and seems like the external reference of that file is there, I check also on the layers and they are not off or frezze, what could be the problem?
View 2 Replies
View Related
Apr 17, 2013
I am running the antique CAD 2004 and went to layouts to start setting up a page. When I drew in the view port, it does not show anything of the model space, zero, zip, nada. Tried "Scale to fit", a new view port with no luck. I opened another project file, it work perfectly, just not this one. It doesn't have any Xref's that I can see, but it does have some proxy objects.
View 3 Replies
View Related
Aug 23, 2012
I have loadad some lisp applications in Tools-Load applications. And when i reopen acad it doesn't show any of these lisp files loaded. What seems to be the problem
View 1 Replies
View Related
May 17, 2012
Acad 2013 recent install. When using the layer menu, sometimes it will update to show item frozen, but doesn't show the snowflake in the menu. Then you can't thaw it as it thinks it is already sunny. Also intermitent problems moving items from layer to layer. Says it changed them, but when listed are still in the original layer. Just this afternoon it deleted the layer, kept the item being changed with no layer association, then gave me an error message. Luckily I had saved recently. The menu has also relocated itself to covering up the menus at the top of the screen and has lost the pictures of new layer, set to current layer etc. I will probably end up reloading software. I am also having problems with dimensions not using the settings color, size etc that are set, but rather defaulting to the autocad default (yellow) etc, which don't print well for us.
View 1 Replies
View Related
Apr 29, 2011
I tried plotting to pdf using the internal PDF plotter but the transparency doesn't show up.
View 5 Replies
View Related
Aug 21, 2013
Our Council has been updating our school system. We have the design suite and have chosen Inventor 2013, AutoCAD 2013, Inventor Fusion.
The issue is that in Inventor the EDIT FORM tool isn't on the Ribbon. It also isn't on the add in's for Inventor 2013 either.
We also downloaded the suite direct from AutoDESK.
View 2 Replies
View Related
Sep 4, 2012
I created a skeleton and now i want to derive the sketches and planes to other parts. It worked for a while, but now it does not work!
The problem is when I create a new .ipt and then I would like to Derive an other part in it. I click on the file from the browser, it puts the part into the .ipt, well, sort of, it's like a visual effect, but NO Derive window appears afterwards, so I cannot edit which sketch or parameter or planes...etc.. I chose to actually derive to the .ipt.
View 2 Replies
View Related
Jun 17, 2012
I'm on Civil3d 2010. I have a drawing where i have background masks on most of my text - everything works great. Then I did a "Save As" to give the drawing a new name. After working in it for a day or so, I noticed that all of the text masks don't show. When I hover over mtext (or blocks with mtext), a border shows around the text (only when hovering). But bottom line is the background mask doesn't show at all or print. The original drawing is still fine.
I've checked and this has nothing to do with line merge in the pc3 file etc.
View 5 Replies
View Related
Dec 6, 2013
I have a typical storm sewer pipe network in a drawing by itself with an alignment. I data referenced both of these into another drawing. I draw the pipe network in the profile view I created and the pipes that run with the road show up fine. Every once in awhile there is a lateral storm sewer pipe that runs across the road. When I draw these in the profile view they show up, but, only the pipes that are skewed to the alignment show up. If the pipe is perfectly perpendicular to the alignment it does not show up. I have two styles setup. One main one that shows the inner and outer pipe walls and another one for overrides for the crossing pipes and that stlye has crossing pipe walls turned on.
Why is it though only the skewed pipes show up as ellipses in my profile view but the perpendicular pipes do not?
View 2 Replies
View Related
Apr 6, 2012
We have hundreds of macros for inserting blocks into drawings. Many require the user to input values for attributes. The command line in 2013 does not display the user prompt for entering values. ATTREQ is set to 1. ATTDIA is 0. We don't want to display the dialog box, just the prompt. Here is what a macro looks like...
*^C^C'clayer;LAYERNAME;-insert;BLOCKNAME;!userr1;;\'torient;l;;0;
There are two pauses before text orientation for a user to enter information.How do I get the attribute prompts to appear in the command line? Works fine in 2012!
View 7 Replies
View Related
Oct 25, 2011
I need to add a hatch fill polyline area but leave the text island out. What I did is put put Polyline ID and Text island ID into an ObjectIDCollection. The code doesn't throw any error but I can't see the hatch.
Public Function AutoCADAddHatch(ByRef newAddedHatch As Hatch, ByRef HatchElementIDs As ObjectIdCollection, ByVal HatchColour As Autodesk.AutoCAD.Colors.Color,
_ ByVal HatchLayerName As String, Optional ByVal PatternName As String = "SOLID", Optional ByRef strError As String = "") As Boolean
Dim db As Database = acApp.DocumentManager.MdiActiveDocument.Database
[Code] ......
View 9 Replies
View Related
Nov 29, 2012
I have a fairly simple corridor, however, I had to modify the alignment, rebuild the corridor and resample cross-sections. Now my right daylight slope won't show up. It shows up in the section viewer, but not the cross-section. I had this problem once before and fixed it, but now I can't remember how I did...I have all targets, sections sampled match corridor sampling etc.
Civil 3D 2012 SP1
Windows 7
View 2 Replies
View Related
Jun 13, 2012
why the design center does not show up when the command is executed !!
View 1 Replies
View Related
