Our Council has been updating our school system. We have the design suite and have chosen Inventor 2013, AutoCAD 2013, Inventor Fusion.
The issue is that in Inventor the EDIT FORM tool isn't on the Ribbon. It also isn't on the add in's for Inventor 2013 either.
We also downloaded the suite direct from AutoDESK.
One of the features I was really looking forward to in CS6 was creating fillable forms with ONE application. I created a form following the step by step instructions in classroom in a book for CS6. When I opened the exported form in Reader X, I get a "This operation is not permitted" error. I opened the completed "end" document in the lesson to make sure I didn't commit an error, and I got the same message when exporting. I have looked for places in menus to modify security restrictions and I can't find any. I installed the updates and that didn't solve the issue.
I saw one solution posted which is to open the document in Acrobat, then do a "save as" option. Is there anything we can do that doesn't involve buying additional software? If this is not the case, then Adobe seriously needs to change its training and advertising about this functionality.
I wish to create a form that with multiple buttons. Each button will place another component (platform, stairs, ladder, railing).
I wish to place them using 'Place iLogic Component"
I know you can call this command by:
ThisApplication.CommandManager.ControlDefinitions.Item("iLogic.PlaceComponent").Execute
But is it possible to automatically browse to and open a file this way using a path "C:CPSVaultPlatformComponentsStairs.iam" within this command?
Why can't you show the file name on a form (without using iLogic to link it to a property)?
View 2 Replies View RelatedShow on Place Component
If I set this to true, then when I "place iLogic component", I don't get the form displayed or the parameter table or the model preview.
If set True, displays the form when placing this model as a component in an assembly. This setting affects Place Component and Place iLogic Component. If the template file has a form, this setting also affects Create In-Place Component.
I have this grid template i use for my layouts I would like to edit text from my form.. How to do???
In attached part I have it to work with the number but not with letters
I have a few lists in my form. The first one decides what information the other lists should have, so none of the choices are the same. I should first add that I have the "OK, Cancel, Apply" option.
Is there any way that I can make the other lists update automatically when I chose something in the first one? The only time they update is when I press the "Apply"-button.
I have parameters and rules that decide what lists should be shown at what option from the first list so I don't think that is the problem.
In this lesson we will consolidate code to prevent code reuse. Follow along as we demonstrate by doing the following and more:
Apply a color to a form command button, loop form controls, and save and get the color from registry
Part 2 of 7
cs_setInnerHtml('video_43f4e134-ee93-489d-ba2f-80042d243821','');
[URL]
i have 2 questions re: nailboard drawings.
When i try to use the edit button on the nailboard tab in order to add dimensions to the harness sketch. the environment changes and the harness sketch disappears. This makes it hard to dimension using the harness dimension button.
Secondly, i have modified the harness in the model and then saved the assembly. Why does my nailboard drawing not update after the save. (it recognizes that changes have been made) Deferred update is set to off. The nailboard drawing is useless if the updates are not automatic.
......alright i have 3 questions......i want to show the wire id near the stubs. i displayed properties but only one of 2 wire id's showed up. Has this got something to do with pick order? How can i get INV to display each wire (id) number?
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
We have some custom macro's running in Inventor wich we call from the ribbon > user commands.
In Inventor 2011 we used the large and small together and the icon's were shown properly.
Now we have moved to Inventor 2013 and the large icon's arnen't shown properly. They display as an large orange @ signin a square box.
The Icon's meet al the requirement, .bpm, 16x16 & 32x32 pix, 24 bit, naming (Modulename.Macronam.Small/Large.bmp)
I'm searching for quiet a while now, but I can't find information or an example to show an Icon (image) in a button on the shelf for my new tools. The addin should run on 64bit windows.
I found some example wich use vb6 tools, but I don't have these on my win64 and c#.
How to add an icon to a button?
Under the view cube, in part files, there must be a short ribbon with 3 or 4 view orientation buttons: the navigation bar.It disappeared, how to bring it back?
View 1 Replies View RelatedWhenever I edit an Extrude 'cut' feature,(eg: To Add or remove a profile), the OK button is greyed out and no matter what I do, I can't get it back.
The only way to edit the extrusion is to:
Shift EOP
Delete the extrusion
Recreate the extrusion.
Shift EOP
fix errors if any.
Autodesk Product Design Suite Premium 2014 SP1 Build 222
Intel Core i7 (950@3.07GHz)
Windows 7x64 (Home) - 12GB Ram
Nvidia GeForce GTX 560 Ti (1Gig - Ver:331.65)
I got a problem to open a dxf file. If I use command method then I can easily do that. But I want to open that file by clicking a button from my windows form. I did the coding for that specified button like below:
Private Sub Button6_Click(sender As System.Object, e As System.EventArgs) Handles Button6.Click
Dim strFileName AsString
LoadDXF.InitialDirectory = "C:"
LoadDXF.Title = "Open DXF File"
[Code] ......
After invoke that button I got a error like below:
How can I open the drawing without commandFlags.session? I want to use the button of my form to open that dxf file.
I am working on an application that uses map to query data, then saves the data to a file, and repeat. It works flawlessly when I use a commandmethod with commandflags.session, But, when I try to run the same code from a form button, I get "drawing is busy". The command from the form button ignores the commandmethod and the commandflags. I am guessing that "sendstringtoexecute" would work, but I would prefer to not do it that way.
What am I missing? Is there another way to lock the session?
Here is what I am trying to do.
drawing1 is open and the user presses the button
data is queried and saved as 1.dwg
close and discard drawing1
open a new doc drawing2
data is queried and saved as 2.dwg
close and discard drawing2
open a new doc drawing3
i would like to implement a functionality similar to plot or hatch forms, where you can expand/collapse part of the form with additional functions
is there some easy way to add the round button with the aradd the round button with the arrow?row?
This doesn't work:
oPartDocument.ComponentDefinition.WorkPoints.Item(2)
All I have is one item. (Center Point)
I created a skeleton and now i want to derive the sketches and planes to other parts. It worked for a while, but now it does not work!
The problem is when I create a new .ipt and then I would like to Derive an other part in it. I click on the file from the browser, it puts the part into the .ipt, well, sort of, it's like a visual effect, but NO Derive window appears afterwards, so I cannot edit which sketch or parameter or planes...etc.. I chose to actually derive to the .ipt.
In my part, there was already an existing Engineering note.
I wanted to add another note. I added my new note, but it does not show up in the browser. I can right click on the note note > Display note and both notes are shown in the engineering notebook. When I exit out of the notebook and go back to Inventor, still not there. Here is a short video of what I am seeing.
[URL]. The "Rev B" noteis the original one and Note 2 is the one that I just added.
Now I if I add another note, then all of them will show up in the browser. This is not the first time that I have seen this, but just thought I would bring this up.
This part was just made with a copy design from Vault. What is weird, is that if I go to the part that this was copied from and add the note, it shows up correctly then. Its like something is getting hosed in the copy design process.
When I click somewhere in the drawing I would like to show a dialog form next to my cursor.
surely cursor.position is not right. What is the right location for this form?
I am working on a form (global) and have added a picture with a parameter and a picture folder underneath. So that the picture displayed on my form will change depending on the parameter value.Here comes the trick. Only text parameters can be used!On the form editor only 'Text parameter' can be selected to drive the picture selection. I actually need an integer, so that i can use my User/Excel parameters from Inventor.
I can work this around with an iLogic rule to equal the value of my string Picture Parameter with the relevant integer Inventor parameter, but the rules need to be run before the pic and the form updates (by pressing the 'Apply' button at the bottom of the form and then the assy updates too. So this takes a couple of minutes)... whereas if it was an option on the form editor then the update would be instant without waiting for everything to update...
Is there a particular reason why the Picture Parameter only can be a text parameter?
After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
Basically i want to edit the forms of a san serif type ( or make my own (if it is easy)) .
I want to edit type because im making an animation where the font letters are morphing in to other letters.
i.e. - A into B into C etc.
i can draw this - the problem is that im gonna have to 100s if i want a smooth animation and i would of thought using illustrator would be alot quicker and i can use more frames.
i have problem with pan function, it doesn't work on scroll button, i have windows 7 (64 bit), microsoft wireless mobile mouse 4000 and autocad 2011, i have downloaded new software for mouse and changed wheel button to middle click and i have changed mbuttonpan to 1 in autocad, still not working.
View 1 Replies View RelatedI needed to edit the layout of a form which was in PDF format and sharp. I opened it in Photoshop which put it at 300 resolution. I made my changes and saved it back to PDF. When I opened it in Acrobat, it was blurred. Not badly, but just enough to notice.
How can I make sharper? Is there a step I'm missing?
I'm trying to create button with macro to edit existing text in place, with predefined text with macro .... For example, existing text is "Old text", and I want this text (or whatever I select) to edit in place with click on macro button to change it to "New text".
View 1 Replies View RelatedRunning LR 4.3 under Windows 7. The softproof button does not show. Pressing "S" key gives proof review, but no way to change profile. Image name shows where instructions say softproof button should be.
View 3 Replies View RelatedI am unable to download the following template: URL....
-Using Chrome, the download button doesn't work.
-Using IE 10, the download button works, but takes me to a login screen. When I enter my adobe ID and password, the page just sits there with a spinning circular spoked icon going round and round, indefinitely.
As a result, I am unable to download this template, or any templates.
Everytime I go to 'save as' the dialogue box does not show. All that it will do is ask me what file format I want and to type in the path (see pictures).
View 4 Replies View RelatedI am having trouble with getting certain pieces of text to show up in my viewport in paperspace. There is text and linework on the same layer. However, only the linework shows up in paperspace, not the text. I have seen this before and don't remember how to fix it. It is a setting somewhere but I don't remember where.
View 7 Replies View RelatedWhen I first started, I noticed that EVERY time I started Acad (Civil 3d 2012 or Arch 2012), the MRU list showed nothing but DST files. If I opened a dwg, it would get added to the top of the MRU list. But then the next time I loaded acad, there would once again be no dwg files--just dst files.
I thought that maybe the profile where the MRU list is stored was being overwritten by a backup (maybe the mgmt here wanted to ensure the profile remained "standard"). But then I noticed that when I open a dst file that was not on the MRU list, it gets added to the MRU list and STAYS THERE when I close the Acad session and is still there the next time I start Acad.
Now the difference between my issue and the other thread (at least as far as I can tell), is that I think they're saying that as dst files are opened, the dwg file(s) get pushed out of the list. But most of the dst files I'm seeing in the list are there from before I started.
The other thread: [URL]....