AutoCAD 2010 :: PURGE Dialogue Box Doesn't Show Up?

Jul 2, 2013

I'm working on 2010, and I can't get the PURGE dialogue box to show up when using the PU shortcut. It will open if I type out PURGE completely, but when I type in PU, stuff just shows up in the command prompt. I even went into the alias-editor and made sure PU = PURGE. I've never had this issue before, but I'm on a new system because I started a new job. At my last job, we were also using 2010, and everything was fine.

View 8 Replies


AutoCAD Civil 3D :: Save As - Dialogue Box Doesn't Show

Nov 26, 2013

Everytime I go to 'save as' the dialogue box does not show. All that it will do is ask me what file format I want and to type in the path (see pictures).

View 4 Replies View Related

AutoCAD 2010 :: How To Widen Layer Pull Down Dialogue Box To Show Long Layer Name

Dec 11, 2012

Having issue with the layer dialogue box showing not enough layer name.  Is it possible to widen it or is that controlled somewhere? 

View 1 Replies View Related

AutoCAD 2010 :: List Doesn't Show DWG Files

Jan 4, 2013

When I first started, I noticed that EVERY time I started Acad (Civil 3d 2012 or Arch 2012), the MRU list showed nothing but DST files.  If I opened a dwg, it would get added to the top of the MRU list.  But then the next time I loaded acad, there would once again be no dwg files--just dst files.

I thought that maybe the profile where the MRU list is stored was being overwritten by a backup (maybe the mgmt here wanted to ensure the profile remained "standard").  But then I noticed that when I open a dst file that was not on the MRU list, it gets added to the MRU list and STAYS THERE when I close the Acad session and is still there the next time I start Acad.

Now the difference between my issue and the other thread (at least as far as I can tell), is that I think they're saying that as dst files are opened, the dwg file(s) get pushed out of the list.  But most of the dst files I'm seeing in the list are there from before I started.

The other thread: [URL]....

View 4 Replies View Related

3ds Max :: Hair / Fur Doesn't Purge Memory After Render

Jun 27, 2012

I have sceene with about 100 objects with about 100 hairs assigned to each of them (using max fur/hair), mr renderer. After rendering the same frame 4 times, max crashes.

I do the same thing again; this time with task manager on, and I see that the memory consumption increases with each new render.

so after
1st frame-4 gb memory usage
2nd frame-8 gb
3rd frame-12 gb
4th frame-crash (no more memory).

I concluded that the max is not purging the memory after end of each frame.

to be sure I tried a few tweeks to make the correct diagnossis.
1st -override all materials to pure white
2nd -turn off all illumination/GI in scene
3rd -geometry caching on/off
and it still happens.

Once I disable the hair/fur the render is done instantly without any memory inflation; however, the memory use still stays on the same level as before I disabled hair.

As for the fur/hair settings, they are default. and I did try setting the "voxel resolution" to 1, tried changing the sampling to draft, and tile memory ussage(70,180, 500)., but how this affects anything, or what's the correct way to determine the ideal value.

Also, I encourage the "buffer" hair type over mr, and geometry, since buffer hairs look a lot "fluffier" and smoother than the other types.

View 1 Replies View Related

AutoCad :: Doesn't Open Windows Dialogue Box

Jan 25, 2012

if i try and to open a new file or save as a current file, the windows box does not open. the command line does populate asking for file name, etc, but obviously is very tedious to navigate windows folders with a command line!

any obvious changes that would prevent windows folder dialogue box not to open?

View 3 Replies View Related

AutoCAD .NET :: Any Event When Enhanced Properties Editor Dialogue Show Out

Mar 24, 2013

Is there any Event when The enhanced properties editor dialogue  show out? I want to do something when the dialogue is showing.

I first use the CommandWillStart Event to catch the "EATTEDIT" order ,however,if only covers the condition that users doubleClick the block .when users first input EATTEDIT command then select the block this event was wrong! 

View 6 Replies View Related

AutoCAD 2010 :: Windows Restarted After Purge Command

May 11, 2012

Using purge command in AutoCAD 2012 , my windows get restart with blue dump.

I tried everything including..digonestic mode, 3gb swithing ,windows update, dot net update, windows firewal/antivirus desbled.

some times while using purge command its give a display error(attached ).I tried using windows 64 bits, but problem remains the same.

View 3 Replies View Related

AutoCAD 2010 :: Edit Xref In Place - Purge?

Jan 26, 2012

We have about 300+ dwg's on which somebody edited the 'xref in place'.

This has caused the particular dwg files to expand from  300k to 4mb.

Purging seems to have no effect. Is there any way of reducing the file size on these back to normality?

View 2 Replies View Related

AutoCAD 2010 :: Cannot Get Dialog Boxes For Purge / Xref

May 3, 2012

I cannot get dialog boxes for purge, xref, etc. I only get the command line.

I made sure filedia=1 and cmddia=1.

The tilde ~ key will not bring up the dialog box from the command line.

View 9 Replies View Related

AutoCAD 2010 :: Unwanted Linetypes And Text Styles Unable To Purge?

Jul 17, 2013

We have a problem in our office. In some of our drawings we keep getting a lot of unwanted linetypes and text styles. Nobody is sure where they originated.

We have tried this method in getting rid of them but it doesnt work. [URL]

See attached file.

Same applies with the text styles.

View 9 Replies View Related

AutoCAD 2010 :: Purge Drawing - Text Styles Not A Selectable Option

Apr 26, 2012

When I purge a drawing, the text styles are not a selectable option (as if there are no purgeable text styles).  if i use (-purge), it will purge the unused text styles.  I can also go into the Styles dialog box and delete the styles.  It happens in all drawings and nobody else in the dept has the problem. I can't find any settings that would exclude any items from the purge dialog box as well.  Autocad 2012? windows 7 64 bit. 

View 1 Replies View Related

CorelDRAW X6 :: Uniform Fill Dialogue Box Doesn't Open?

Jun 2, 2013

The dialogue box for Uniform Fill is not opening.

So I am posting a video here: [URL]

View 7 Replies View Related

Lightroom :: Photo In Folder Doesn't Appear In Import Dialogue

Feb 12, 2012

I have LR 3.6 and have created a catalog of pictures from a ski trip I took last year.  All of these pictures and the LR catalog are in one folder on my hard drive.  After sorting, deleting and retouching quite a few pictures I now notice that one picture is missing from the library.  If I open the folder in Explorer (Win 7) I can see the picture, and Windows Picture & Fax Viewer will open/display this picture so it appears the file itself is fine.
However, I cannot get this picture into the library for some reason.  When I choose File>Import Photos this one picture doesn't show up in the list of photos.  It's as if Lightroom can't see this picture for some reason.
Oh, and I don't know if it matters, but there is a movie clip with the same filename but a different extension (obviously) that does show up in the library and the import dialogue.  The picture filename is DSC_0001.jpg, the movie filename is

View 4 Replies View Related

Lightroom :: Show Import Dialogue When Memory Card Is Attached?

Jun 12, 2013

I have unchecked the box for "Show import dialogue when memory card is attached" in LR 4 and checked it in LR 5, but LR 4 is still opending every time when I insert a card in my card reader.

View 1 Replies View Related

AutoCAD 2010 :: How To Turn Off Selection Dialogue Box

Jul 28, 2010

A selection box has appeared out of no where in AutoCAD 2011. Whenever I enter a command then select an object a dialogue box called 'selection' appears with a list of possible objects for me to select.

It is extremely annoying. I have attempted to turn it off in options> setting but nothing seems to turn it off.

View 6 Replies View Related

AutoCAD 2010 :: Missing Migrate Custom Settings Dialogue Box

Nov 2, 2011

We are curently using ACAD2011.

I installed ACAD2012 but never got the Migrate custom settings box upon opening ACAD2012 for the 1st time.

I reviewed Autodesk Help that ensured me that I could also find it thru:

<start...Autodesk mech 2012Migrate custom settingsmigrate from a previous release>

Epic fail... all that showed up there was export and import autoCAD 2012 settings.

Where oh where could my migration tools box have gone? Why is it not there? 

(FYI, this happened to us when we upgraded from 2010 to 2011 also but we thought we had done something wrong so we eventually just manually transferred files over. That was very time consuming and we do not want to perform that exercise again.) 

View 9 Replies View Related

AutoCAD 2010 :: How To Disable (Rename & Renumber Sheet) Dialogue Box

Sep 19, 2012

Is there a system variable that disable the "Rename and Renumber Sheet" dialogue box from appearing when double clicking on layout tab of current drawing which is part of sheet set?

I used to be able to just  double click on a layout tab and change it. This dialogue box can't seem to edit it if the drawing is open. We use the layout the tab as current revision of drawing.

I know I accidentally click on yes before when it asked me if I want to use the dialogue box to edit layout tabs but can't seem to find anything on how to disable it. 

View 1 Replies View Related

AutoCAD 2010 :: Large / Dense Hatch Patterns (Missing Dialogue Box)

Oct 8, 2013

A work mate here at sometime or another clicked on the "always perform my current choice" check box when the "Hatch - Large, Dense Hatch Patterns" dialogue box appeared.

Question is, is there anyway to reset this so the dialogue box comes back up?

View 2 Replies View Related

AutoCAD 2010 :: 2012 Crash Applying Changes To Dims Style Values Dialogue Box

Mar 14, 2013

When i attempt to change any value of any dimension style, i am no longer given the 'Ok' option to finish and close the dialogue box. Instead i get an error code.

I recall that it arose when using civil 3D 2013 (which i've since uninstalled) and has continued into AutoCAD 2012 (installed post civil 3D 2013 uninstall).

View 5 Replies View Related

AutoCAD 2010 :: New Logitech Mouse Doesn't Pan In 2010

Aug 29, 2009

I just got a new Logitech wireless keyboard and mouse (MX 5500 Revolution) and I can not pan with the mouse. I love this wireless set up and it was a birthday present so I dont want to just get rid of it. I have the VX Revolution mouse at the office and have no problems with it.

View 9 Replies View Related

AutoCAD Civil 3D :: Text Doesn't Show Up In Paperspace

Feb 12, 2010

I am having trouble with getting certain pieces of text to show up in my viewport in paperspace. There is text and linework on the same layer. However, only the linework shows up in paperspace, not the text. I have seen this before and don't remember how to fix it. It is a setting somewhere but I don't remember where.

View 7 Replies View Related

AutoCAD Inventor :: Drawing Doesn't Show All Workpoints

Feb 27, 2012

This doesn't work:


All I have is one item. (Center Point)

View 1 Replies View Related

AutoCAD Architecture :: External Reference Doesn't Show?

Apr 8, 2012

I am working with files that somebody else did, I need to bring an external reference and it dosen't show up, then I check on the ref command and seems like the external reference of that file is there, I check also on the layers and they are not off or frezze, what could be the problem?

View 2 Replies View Related

AutoCad :: Viewport Doesn't Show Model Space

Apr 17, 2013

I am running the antique CAD 2004 and went to layouts to start setting up a page. When I drew in the view port, it does not show anything of the model space, zero, zip, nada. Tried "Scale to fit", a new view port with no luck. I opened another project file, it work perfectly, just not this one. It doesn't have any Xref's that I can see, but it does have some proxy objects.

View 3 Replies View Related

AutoCad :: Doesn't Show Any Loaded LISP Applications

Aug 23, 2012

I have loadad some lisp applications in Tools-Load applications. And when i reopen acad it doesn't show any of these lisp files loaded. What seems to be the problem

View 1 Replies View Related

AutoCAD 2013 :: Doesn't Show Snowflake In Menu

May 17, 2012

Acad 2013 recent install.  When using the layer menu, sometimes it will update to show item frozen, but doesn't show the snowflake in the menu.  Then you can't thaw it as it thinks it is already sunny.  Also intermitent problems moving items from layer to layer.  Says it changed them, but when listed are still in the original layer.  Just this afternoon it deleted the layer, kept the item being changed with no layer association, then gave me an error message.  Luckily I had saved recently.  The menu has also relocated itself to covering up the menus at the top of the screen and has lost the pictures of new layer, set to current layer etc.  I will probably end up reloading software.  I am also having problems with dimensions not using the settings color, size etc that are set, but rather defaulting to the autocad default (yellow) etc, which don't print well for us.

View 1 Replies View Related

AutoCad :: 2011 - Plotting To PDF But Transparency Doesn't Show Up

Apr 29, 2011

I tried plotting to pdf using the internal PDF plotter but the transparency doesn't show up.

View 5 Replies View Related

AutoCAD Inventor :: Edit Form Button Doesn't Show

Aug 21, 2013

Our Council has been updating our school system. We have the design suite and have chosen Inventor 2013, AutoCAD 2013, Inventor Fusion.

The issue is that in Inventor the EDIT FORM tool isn't on the Ribbon. It also isn't on the add in's for Inventor 2013 either.

We also downloaded the suite direct from AutoDESK.

View 2 Replies View Related

AutoCAD Inventor :: Derive Part Windows Doesn't Show Up

Sep 4, 2012

I created a skeleton and now i want to derive the sketches and planes to other parts. It worked for a while, but now it does not work!

The problem is when I create a new .ipt and then I would like to Derive an other part in it. I click on the file from the browser, it puts the part into the .ipt, well, sort of, it's like a visual effect, but NO Derive window appears afterwards, so I cannot edit which sketch or parameter or planes...etc.. I chose to actually derive to the .ipt.

View 2 Replies View Related

AutoCAD Civil 3D :: Background Mask Doesn't Show / Print

Jun 17, 2012

I'm on Civil3d 2010.  I have a drawing where i have background masks on most of my text - everything works great.  Then I did a "Save As" to give the drawing a new name.  After working in it for a day or so, I noticed that all of the text masks don't show.  When I hover over mtext (or blocks with mtext), a border shows around the text (only when hovering).  But bottom line is the background mask doesn't show at all or print. The original drawing is still fine.

I've checked and this has nothing to do with line merge in the pc3 file etc.

View 5 Replies View Related

Copyrights 2005-15, All rights reserved