We have about 300+ dwg's on which somebody edited the 'xref in place'.
This has caused the particular dwg files to expand from 300k to 4mb.
Purging seems to have no effect. Is there any way of reducing the file size on these back to normality?
When saving an AutoCAD drawing there is a Thumbnail image saved (if you have the option turn on), but when the command "Edit Xref In-Place" is used there is no Thumbnail image saved. So now when I try to preview any drawing that has been edited through this command there is no longer a thumbnail.
I am using AutoCAD 2012 and the option to save a thumbnail is turned ON.
I am trying edit an Xref in place in a sheet file both through the paper space view port or within the sheet file's model space but receive a pop-up warning that states "Selected Xref Block is NOT editable". Other sheet files are set up the same way and allow edit Xref in-place.
View 1 Replies View RelatedUntill recently I have been able to edit my blocks or xref files in place. Now when I try do that CAD tells me to select nested item. Is this a setting a changed by mistake? If so what is it?
View 2 Replies View RelatedI cannot get dialog boxes for purge, xref, etc. I only get the command line.
I made sure filedia=1 and cmddia=1.
The tilde ~ key will not bring up the dialog box from the command line.
Any way to force the checkbox in my attached pic to "Prompt to select nested objects"?
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
I'm getting very long run times to edit x refs in place. Once the exref drawing opens, sometimes after 2 or three minutes, and I make my edit, It can take ten minuted to close the xref.
Drawing are clean, purged, -purged, recovered audited. Computer is new workstation and dedicated to CAD only. Very little opportunity for corrupted files.
Scenario:
1. You have a base map with survey points inserted.
2. You create a sheet, xref the base map, freeze survey points in base map, insert survey points into sheet so they can be manipulated for visual clarity.
Problem:
In sheet drawing, using the edit xref-in-place command to edit base map causes the points to want to be reinserted and in a lot of cases, when the sheet drawing is re-opened, the points are completely gone.
I am working on Xrefs in autocad, I come across one scenario as below,
AutoCAD application is not allowing me, when tring to "Edit Reference In Place" mode for read only xref file. and displaying below dialog box.
Our company uses xref electromechanical,
some problem we encountered after binding the xref become a block mostly like a baseplan & equipment system . can't edit block In-place in block references in latest autocad 2014 LT.
Using purge command in AutoCAD 2012 , my windows get restart with blue dump.
I tried everything including..digonestic mode, 3gb swithing ,windows update, dot net update, windows firewal/antivirus desbled.
some times while using purge command its give a display error(attached ).I tried using windows 64 bits, but problem remains the same.
I'm working on 2010, and I can't get the PURGE dialogue box to show up when using the PU shortcut. It will open if I type out PURGE completely, but when I type in PU, stuff just shows up in the command prompt. I even went into the alias-editor and made sure PU = PURGE. I've never had this issue before, but I'm on a new system because I started a new job. At my last job, we were also using 2010, and everything was fine.
View 8 Replies View RelatedWe have a problem in our office. In some of our drawings we keep getting a lot of unwanted linetypes and text styles. Nobody is sure where they originated.
We have tried this method in getting rid of them but it doesnt work. [URL]
See attached file.
Same applies with the text styles.
When I purge a drawing, the text styles are not a selectable option (as if there are no purgeable text styles). if i use (-purge), it will purge the unused text styles. I can also go into the Styles dialog box and delete the styles. It happens in all drawings and nobody else in the dept has the problem. I can't find any settings that would exclude any items from the purge dialog box as well. Autocad 2012? windows 7 64 bit.
View 1 Replies View RelatedWhen I attach an Xref to the file I am working with, it is dimmer in color. Is there a way to edit the xref file so that it appears brighter & easier to read. I seem to call this ability in some previous training, but I cannot seem to figure out how to change it.
View 6 Replies View RelatedAutoCAD 2008.I have read numerous articles saying that AutoCAD has made this feature drawing specific as opposed to an overall setting. What this means is that every drawing you edit layers in a xref, you get pop ups stating that layers have changed. Especially annoying when you are publishing a set of drawings. Does any overall command to turn this nonsense off completely? Or a command that will reconcile the layers automatically without the pop up message?
Any way to just bind a raster image into an autocad drawing, without having it show up in the xref manager?
I'm using acad 2010. Twice now this has happened in two days. Using edit block in place. I edit the block, pick save and gone, Acad just closes down, no warning no nothing.
View 2 Replies View RelatedI have some blocks that I want to use to make a drawing. In the attached dwg, there are a few blocks inserted, and a shape made from those blocks.
As they stand, I can send the dimensions of each block into an excel spreadsheet or into a table. However, as you can see, if I want to make that triangle look like a triangle, I need to edit the blocks themselves. I'd like to edit each block in place (even though I'll have to create a new block for the edited version, that's okay), and still be able to reference the length of each block in excel.
If possible, I'd also like to figure out how to reference the angle into excel, so that when I look at the excel table, it tells me that I need that piece of material, cut to that length, with that angle.
I use refedit quite a bit to edit blocks in-place, but can't find a way to do this with dynamic blocks without breaking the link to the original definition and creating a new block definition.
Is there a setting I can change, or another way to edit a dynamic block in-place?
I am having a problem with editing in place in Inventor 2012. Some parts will edit in place and some won't. Attached are a couple of files I am using which has this problem. I need the other assemblies in place so that I can locate a hole inline with a threaded insert.
View 8 Replies View RelatedWhen I try edit block in place this error occurred:
Errors found in references to other objects:
Object reference missing: AcDbXrecord, to AcDbBlockTableRecord
Cancel
The way it looks I should be able to edit the propertyset data though an XRef... but all the properties are grayed out. I thought it was because I also had the XRef open... so I closed it. Still the same result.
The discription says "Edit property set data in the current drawing or through external references. Add or Remove property sets."
Am I not understanding the tool - or what?
Can you edit a block in place (refedit) without changing globally and without exploding within that drawing?
View 6 Replies View RelatedWhen I edit a block in place, REFEDIT toolbar pops up. This is good.
But why even I clicked "Add to working set" button on the toolbar, it still asks me select "Add" in command line?
Apparently I already selected "Add" button.
Is there a way to skip this command line option?
I can edit the cleanup in place just fine and in plan all is good, but in 3D, the height of the modfied region is not the full wall height, just some random height.
View 4 Replies View RelatedI'm trying to create button with macro to edit existing text in place, with predefined text with macro .... For example, existing text is "Old text", and I want this text (or whatever I select) to edit in place with click on macro button to change it to "New text".
View 1 Replies View RelatedThe 2D drawings I am working with were exported from 3D REVIT files to 2D AutoCAD files. There are several XREFed drawings that are both mechanical and architectural from the original REVIT files that for whatever reason, the block's line weights came over with line weights of 70 in those blocks.
When I plot, the objects are a blur with the line weight so high. I tried using the command "setbylayer" but that didn't work since nested blocks still had lineweights of 70. Is there a VBA or LISP routine to run through all the blocks (including nested) that can change the line weights to a given number?
I have a staircase from the first floor to second floor with a total of 3 landings.. I need to fix the railing at the bottom to go down to 3'0, right now its sitting at 3' - 6"... AT 3'0" it needs to connect to the handrail that wraps around (the red)...normally I can just edit the railing by pulling it longer but since it was a place on host railing.. it looks like it loops around and when I tried playing around with that to extend the bottom rail.. it gave me an error..
View 1 Replies View RelatedIs there a way to duplicate in place? I have a instance where I am using a lot of subtractions and I want to have multiple copies of objects in the exact same position. I am finding that when I do copy I often snap to the object but the direction for depth relative to the view I am in ends up being different. Example being I have a 2" Diameter circle extrude that I want to be 120" long. I created that. I want a copy of it in the same position. I am looking from the front so all I see is the circle. I select copy and grab the center point and snap to the centerpoint. Now I have its zero at the other's 120" mark. I am hoping I could just run a duplicate command, but I cannot seem to find that.
View 3 Replies View RelatedLets say I have file 1 and files 2,3,4, file 1 contains several layers and is an xref in files 2,3,4.
Can I somehow set a layer to off or frozen in file 1 and it will make sure to be switched off in my files 2,3,4 aswell? I have played around with New VP Freeze but if I add a layer at a later time and files 2,3,4 already have several viewports that doesn't do me very good.
I am not sure if i ever noticed this before, but if I get a dwg file from an architect who has XREF another dwg background and then I enter the command _AECEXPORTTOAUTOCAD2010 on the main dwg will that take all the XREF files and convert them to blocks as part of the exported file? This seems to have been done and wasn't sure why?
View 1 Replies View Related