I am having a problem with editing in place in Inventor 2012. Some parts will edit in place and some won't. Attached are a couple of files I am using which has this problem. I need the other assemblies in place so that I can locate a hole inline with a threaded insert.
View 8 RepliesI have been using Inventor 2011 and I have noticed that I can’t create a component *.IAM in place if there is a content center part that is selected. I am saving content center parts as custom.
View 8 Replies View RelatedIs it possible to place some standard block in parts or assemblies and then make it visible in idw's.
View 7 Replies View RelatedWhen I insert a standard 6" square tube into an assembly there are all of the custom shapes and standard structural members to choose from. When I try to put the same tubing into a part file only the custom shapes are visible and no standard parts to choose from.
I can only guess that I have some obscure check box missing. There appears to be no good reason why I would be restricted in part files.
I am trying to simulate the path of ropes through pulleys/sheaves etc. It's a bit of a chicken-and-egg set up.
My workflow is the following:
Assemble and constrain geometry
Create plane in assembly than rope will run on.
Create in-place part (rope) with box ticked for "constrain to sketch plane" or the like, referencing above geometry.
Question 1: I see my in-place component is not constrained to referenced geometry, I can drag it around?
I then ground it or constrain to workpoints used as part of the original "project geometry".
I then alter the original geometry and...nothing!
Question 2: How do I get my rope to adapt?
Attached is a mock up - original contains assemblies within assemblies etc. The base has been altered after creating the in-place parts, and the rope has not followed suite.
Inv 2013 Pro
I currently have to palce a lot of parts from the content center into an assembly and miss essential imates for easy placement. I am using IV2010 at the moment and have no clue where to start.
I have tried copying a new instance of a part into a new library. I then placed this component in the assembly hoping I could add iMates to it in the assembly environment. But when I want to save I get the message that the part has not been checked out for me to use even though I have read/write access to the library.
So a couple of questions here:
As files in the CC are saved in a datapase and not as part files, can imates be included in that database? Do I really need to recreate the part from scratch, and then publish it to the library?
How would it be possible to open up a CC file like in the part edit mode in an assembly?
So I have been working on this assembly for quite a while and now Inventor 2013 doesn't let me edit my component on the fly from the assembly space like before. (the Edit button appears dim as shown below)
I am (unfortunately) running the soft on XP and it's running out of memory quite often. I was wondering if it was possible that Inventor blocks the user from using functions that could lead to a potential crash.
Windows 7 Ultimate 64-bit SP1
Intel Core i7-4930MX CPU @ 3.00GHz
32.0GB Dual-Channel DDR3 @1600MHz
NVIDIA GeForce GTX 780M 4GB Ram
240GB SSD/500GB HDD
Autodesk Product Design Suite Premium 2014
I have two parts, one uses some parameters from another one by link.
Now I have copied both and need to update ties between copies since a copy still has a link to original part.
Seems like there is no possible to just change or edit a link from one part to another in Parameters window.
Instead to update a new link I should clean all borrowed parameters in all sketches, delete the folder, make new link and set all parameters back. is it possible to change or edit the link in some easy way?
Im using Inventor 2011. I mirrored an assembly contained 3 smaller assembly (each assembly had 6-7 parts).
I want to edit some parts in the new mirrored assembly, but I cant.
How can I edit the mirrored parts?
Can I place an empty .ipt file into an assembly then start working on it?
Or do I have to create the new part, save it, then go into my assembly and place it?
I have an assembly drawing .IDW with more than 50 instances of an O-ring (same ipt.). Is it possible to edit the hatching of the O-ring and all 50 will update without having to edit each individually. ?
Inv 2008 sp1
Im working on a plastic enclosure, I needed to make a hole for a connector but this hole would cut into both the top and bottom of the enclosure. Normally when I edit parts in an assembly I just double click them, they become transparent and I can do all my edits. Since I need to make a hole that cuts into both parts, I just went to the 3D Model tab started a new sketch and extruded out the cut.
However doing it this way does not reflect the changes when the parts are opened on their own. Is there a way to have these changes trickle down to the part files?
My company structures a parts list on detail drawings a certain way. I need to edit the parts list actual table grid layout.
See attached.
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
So there seems to be a problem with the multi body part functions in 2013.
Once you create a multi body, or a multi body feature, and then try to go back and edit it you can no longer select difference bodies.
A little more digging and it almost seems like the problem is that you can not use "ctrl" to multi select bodies.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
The Edit via spreadsheet option does not work, it will not call up Excel, although it believes that it does. The computer is running Win7 Ultimate sp 1 64, Office Home and Business 2010 sp1 32, Inventor 2012 sp2. The software (windows, office) is up to date, I have done the registry edit that other sites have mentioned.
I will bring up an .ipt, right click on Table, click on Edit via spreadsheet. I will get a circle for a cursor for a moment as if it were processing, then nothing. I right click on it again, and just get the How To option, so it believes Excel is open when it is not.
I'm having problems with the crop feature in an Inventor idw. Having cropped my view I then go into the browser to edit the crop (edit sketch), the lines on the crop window will not move and I am unable to edit the selection, why is this not working ? Occasionaly I can move / resize one or two of the crop boundry lines but never all of them.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
When saving an AutoCAD drawing there is a Thumbnail image saved (if you have the option turn on), but when the command "Edit Xref In-Place" is used there is no Thumbnail image saved. So now when I try to preview any drawing that has been edited through this command there is no longer a thumbnail.
I am using AutoCAD 2012 and the option to save a thumbnail is turned ON.
I am trying edit an Xref in place in a sheet file both through the paper space view port or within the sheet file's model space but receive a pop-up warning that states "Selected Xref Block is NOT editable". Other sheet files are set up the same way and allow edit Xref in-place.
View 1 Replies View RelatedI'm using acad 2010. Twice now this has happened in two days. Using edit block in place. I edit the block, pick save and gone, Acad just closes down, no warning no nothing.
View 2 Replies View RelatedI have some blocks that I want to use to make a drawing. In the attached dwg, there are a few blocks inserted, and a shape made from those blocks.
As they stand, I can send the dimensions of each block into an excel spreadsheet or into a table. However, as you can see, if I want to make that triangle look like a triangle, I need to edit the blocks themselves. I'd like to edit each block in place (even though I'll have to create a new block for the edited version, that's okay), and still be able to reference the length of each block in excel.
If possible, I'd also like to figure out how to reference the angle into excel, so that when I look at the excel table, it tells me that I need that piece of material, cut to that length, with that angle.
I use refedit quite a bit to edit blocks in-place, but can't find a way to do this with dynamic blocks without breaking the link to the original definition and creating a new block definition.
Is there a setting I can change, or another way to edit a dynamic block in-place?
Any way to force the checkbox in my attached pic to "Prompt to select nested objects"?
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
When I try edit block in place this error occurred:
Errors found in references to other objects:
Object reference missing: AcDbXrecord, to AcDbBlockTableRecord
Cancel
We have about 300+ dwg's on which somebody edited the 'xref in place'.
This has caused the particular dwg files to expand from 300k to 4mb.
Purging seems to have no effect. Is there any way of reducing the file size on these back to normality?
I'm getting very long run times to edit x refs in place. Once the exref drawing opens, sometimes after 2 or three minutes, and I make my edit, It can take ten minuted to close the xref.
Drawing are clean, purged, -purged, recovered audited. Computer is new workstation and dedicated to CAD only. Very little opportunity for corrupted files.
Scenario:
1. You have a base map with survey points inserted.
2. You create a sheet, xref the base map, freeze survey points in base map, insert survey points into sheet so they can be manipulated for visual clarity.
Problem:
In sheet drawing, using the edit xref-in-place command to edit base map causes the points to want to be reinserted and in a lot of cases, when the sheet drawing is re-opened, the points are completely gone.
Untill recently I have been able to edit my blocks or xref files in place. Now when I try do that CAD tells me to select nested item. Is this a setting a changed by mistake? If so what is it?
View 2 Replies View RelatedCan you edit a block in place (refedit) without changing globally and without exploding within that drawing?
View 6 Replies View RelatedWhen I edit a block in place, REFEDIT toolbar pops up. This is good.
But why even I clicked "Add to working set" button on the toolbar, it still asks me select "Add" in command line?
Apparently I already selected "Add" button.
Is there a way to skip this command line option?
I can edit the cleanup in place just fine and in plan all is good, but in 3D, the height of the modfied region is not the full wall height, just some random height.
View 4 Replies View Related