I made a 90 meter box in model, created a titleblock and added a viewport in layout. The viewport scale is 1:1. Plotting scale is 1:1. It just dawned on me that because everything is 1:1.... I should have a peice of paper 90 meters long. My thick head has managed to confuse me, Does Cad apply a scale to the viewports even though its set 1:1 and plotted 1:1?
View 9 RepliesI have a lot of sheet DWGs with a single layout in each. The layouts have several viewports into model space.
Is there a way to export out the layout tab where the viewport contents have been converted and placed into the layout space?
Ideally, I'm hoping to basically convert the viewport heavy paperspace into a dumb model space layout.
I am plotting a layout with several viewports as a PDF, and the viewports are not plotting as displayed. Everything else on the layout plots perfectly.
I've attached two pictures:
1) asdisplayed.jpg is what I want
2) pdfoutput.jpg is what is outputed. As you can see the lines are (1) greyed + (2) do not have the lineweight I desire.
asdisplayed:AsDisplayed.JPG
pdfoutput:pdfoutput.JPG
Here are my settings:
1) Plot style table: acad.ctb. I modified the Color 250 to be completely black so that text would be black. I've set the color for every object in modelspace to color 250 as well (no dither).
2) Plotter: DWG to PDF.pc3
3) Paper size: ANSI expand B
4) Plot scale: 1:1
5) Plot object lineweights: checked!
6) Plot with plot styles: checked!
7) Plot paperspace last: checked!
8 ) "Shade plot" setting for viewports: all set to "as displayed"
9) All viewports set to "Hidden" visual style
NOTE: I've noticed changing to visual style to 2D wireframe or using isolines tends to output exactly as displayed (keeps the lineweight + the black color / not greyed out. I need to use the hidden visual style for my purposes.
Also I always get the option to update shading plots for viewports and I've clicked both options - both get same results of the modified viewports.
They have 3D objects in Model Space and setting up viewports in Paper Space to print out everything. The problem is that the viewports are ignoring the plotstyle settings. Everything should be plotting out black and white.
I will attach a screen shot with comments for each viewport.
My thoughts are that the Visual Style has something to do with it, but I can't figure it out.
I've been messing around with a 3D drawing trying to get it to plot properly. I have 4 viewports on the layout, and the issue is that parts of the viewport are being mysteriously chopped off, as if some great big white box is covering part of the viewport. This is definitely not an issue with printer margins - this is occuring in the middle of the page.
I've deleted all the viewports and created new ones, but the drawing is still being cut off in the same locations. 20 sheets of A3 and most of the day later.
I am having a problem plotting any viewports that are not set to 2D wireframe. All viewports set to 2D wireframe plot correctly but anything set to hidden of conceptual plots as a black square.
View 1 Replies View RelatedI have a bunch of pdf underlays in model space with four viewports referencing them in one paperspace layout. The viewports are on their own non-plot layer and the pdf underlays are on a plottable layer. This isn't an issue on the original dwg that I copied them from.
-Everything appears fine in paperspace (see FIG. 1)
-When I go to plot, only the viewport on the right shows up. (see FIG. 2)
-If I move the viewports on the left to the right side, they plot.(see FIG 3)
-When I move the original right viewport to the left side it no longer plots. (NOT SHOWN)
-If I toggle each viewport in the original layout and draw a random line in model space all four of them plot(see FIG. 4)
-I've checked the vp and pdf underlay layers and properties-all are good
-I've tried creating new vp's and still have same issues
-tried creating a new dwg, copied in the pdf underlays and still have same issue
I am plotting a layout with several viewports as a PDF, and the viewports are not plotting as displayed. Everything else on the layout plots perfectly.
I've attached two pictures:
1) asdisplayed.jpg is what I want
2) pdfoutput.jpg is what is outputed. As you can see the lines are (1) greyed + (2) do not have the lineweight I desire.
1) asdisplayed:
2) pdfoutput:
Here are my settings:
1) Plot style table: acad.ctb. I modified the Color 250 to be completely black so that text would be black. I've set the color for every object in modelspace to color 250 as well (no dither).
2) Plotter: DWG to PDF.pc3
3) Paper size: ANSI expand B
4) Plot scale: 1:1
5) Plot object lineweights: checked!
6) Plot with plot styles: checked!
7) Plot paperspace last: checked!
8 ) "Shade plot" setting for viewports: all set to "as displayed"
9) All viewports set to "Hidden" visual style
NOTE: I've noticed changing to visual style to 2D wireframe or using isolines tends to output exactly as displayed (keeps the lineweight + the black color / not greyed out. I need to use the hidden visual style for my purposes.
Also I always get the option to update shading plots for viewports and I've clicked both options - both get same results of the modified viewports.
I wrote a program to separate drawings with multiple layouts into several drawings. The problem I'm running into is even though there is only one viewport in the layout.the program is finding two. One has the right viewcenter, width and height the other is wrong.
View 1 Replies View RelatedMy drawing will only allow 3 viewports in each paperspace layout created. When I try to add or copy more than 3 viewports previous viewports created will go blank and cannot be activated anymore. I have never had this issue before, is there a setting that can fix this problem? I am running AutoCAD Architecture 2010
View 2 Replies View RelatedI am printing a Layout that has 3 Viewports. The View ports are of an aerial photograph that is a 600DPI TIFF file about 1GB in size. When I print the single sheet 24x36 the PDF file is 75mb
I am new to Acrobat X, I had been using version 7. I remember there being a reduce file size option in the old version but I cant find it in X.
Any tips on getting the printed PDF file smaller? Is it something I can do in AutoCAD or Acrobat?
Details:
AutoCAD 2010
Win 7 Machine
8GB RAM
2.8 ghz i7
Adobe Acrobat Pro X
A few times out of each day when I plot all of my viewports will be moved of the printable area into the gray area below in paperspace.
I cannot figure this out as I have used a few different profiles from different machines and still have the same issue.
Using 2008LT/2012LT...I am working on a job that is being done in phases. I want to show one phase as per pen assignments and other phases in a grayscale. Is there a way to do this when plotting or do I have to change the viewport display individually for the grayscale vps?
View 3 Replies View Relatedwhen I insert a block that is made up of different layer lines and shapes then they only show up in the model tab. The other layouts I have won't show the blocks even though the same layers are turned on and unfrozen in these other layout viewports just like the model space. It's looking like trying to use multilayer dynamic blocks will be pretty useless unless they work in every layout viewport and not just in model space.
View 5 Replies View RelatedIs it possible to show two different viewports in the same layout that show views from two different drawings? So one viewport would show a section of the current drawing's modelspace, and the second viewport would show a a section of modelspace from another drawing? (and possibly update automatically like an XREF?) Or would the easiest way be to just XREF both drawings into a new drawing, and then show viewports from them in the new drawing?
View 3 Replies View RelatedI have a drawing file with lots of layouts, some of which have multiple viewports. I want to create a new layer and use it in just a few viewports. Is there a way to set the default vpfreeze setting to frozen for new layers? That way I can just thaw it in a few viewports instead of trying to vpfreeze it in a lot.
LT, C3D 2005 - 2014
XP, Vista, 7
Here is a problem I am having in autocad 2011 and is very annoying dimentioning 3d modes in paper space the viewport line obscures any line in layout space that corsses it I have tried all the usual tricks send above bring to fron etc Ive frozen and turned off the viewport line etc nothing works!!
it only happens with 3d objects what I do when detailing something is keep the 3d model then create flatshots of the object i need to detail thendimentions the flat shot objects however if any single 3d element is in themodelspace I get this obscured dimention crap it is funny i dont recall this being a problem in version 2006 am I missing something or is autocad 2011?
OK I worked around this by making sure the viewport for the object I am detailing is set to 2D wireframe however i would like to add some notes to the 3d model through the viewport without turning the model from conceptual to wireframe.
After drawing in model space(1:1 Scale) I then dimension as needed using Annotative Dimensions, Multileaders and MText using the same 1:1 scale. But when I create the variuos viewports on my layout pages the dimensions aren't scaling to the viewport scale.
This is where it may be partly my fault; When I first started using annotative dimensions etc. a box would pop up asking what scale to use. Because I am dimensioning in model space, rather than always seeing this text box I selected "Do not ask again" check box to always use 1:1 scaling.
These are some of the other settings in place;
ANNOAUTOSCALE = 4
Annotation Visibility = ON
Automatically Add Scales = ON
In ACAD 2012 if there is two viewport in a layout hatch shows up as solid. I tried the same in ACAD 2011 and everything works ok.
View 4 Replies View RelatedI am curious how the default workspace “3D Modeling” is able to combine ribbon panels from both the acad.cuix file and the modeldoc.cuix file in one tab. See attached screen shot to see where I highlighted the differences between the tab in the workspace and the tab in the acad.cuix file. I am trying to recreate this in my workspace without having two separate layout tabs.
View 2 Replies View RelatedI have 2 quick questions:
1- How do I turn OFF the display of Layers in Layout viewports, but they remain ON in the Model?
2- How do I rotate a group of objects to match my orthogonal UCS?
I need to select all the viewports in the drawing and to make some changes with them, I'm planning to select them all with ssget command. If I do that I will have one viewport for the paperspace itself in every layout. One of my question is, how to know which viewport is the paperspace itself?
Second question is, how to get the name of layout in which one is the viewport? It is important to me that the lisp is really fast, so I'm planning to do the most of stuffs with vla commands.
I am trying to plot a paper space as JPG, the drawing scale is 1:1 the paper is the size an a4 page, I tried using the publish to web JPG.pc3 but the lines come out as gray and faint, I tried all the different combination of pixels and scale but without success!
View 5 Replies View RelatedIf I used millimeters as my UNITS, how can I scale them when plotting it into A1 or A0? How will I know the scale that I will use in Layout tab so that it will fit on the paper that I will used?
View 9 Replies View RelatedThis error happened to us, when we tried to get the active layout from the acad document. We are using AutoCAD 2009 & C#.NET 4.0 Framework.
The error is as below:
Unable to cast COM object of type 'Autodesk.AutoCAD.Interop.Common.AcadLayoutClass' to interface type 'Autodesk.AutoCAD.Interop.Common.IAcadLayout'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{C6F55F5A-33AF-4B5F-9949-86C6AEEF1834}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
The piece of snippet looks like the following
using Autodesk.AutoCAD.Interop.Common;
AcadApplication acadApp = (AcadApplication)Marshal.GetActiveObject("AutoCAD.Application");
AcadDocument acadDoc = acadApp.ActiveDocument;
//The following line throws the error as stated above
AcadLayout aLayout = (AcadLayout)acadDoc.ActiveLayout;
But it can be accessed if we change the property " Embed Interop Types " of DLLs (a) Autodesk.AutoCAD.Interop
(b) Stdole
from True to False
But again it throws the same error when we try to retrieve any methods from the retrieved AcadLayout. The whole application works fine with AutoCAD 2012 after re-referencing the DLLs.
I have floorplans from a building with a total of 80 appartments. Now i want to plot PDFs in A3 format, each page with 1 appartment. That would be 80 pages/PDF-files.
The way i did it up to now was i have put all A3 pages in a single layout and used the Window-function in the Plot dialog to print each page individually, manually numbering the file-names, and combining files in Acrobat as needed.
But doing this for 80 pages is too much - especially because i will likely have to plot it more often in the future. As far as i can see, i could make 80 layouts and use the Publish function, make a sheet-list and plot that way.
I keep wondering - is there not a more efficient solution to this problem than creating 80 layouts? There must be a more intelligent solution to this. Whats the preferred way of doing this?
P.S. i use AutoCAD2007 and Acrobat for plotting.
We have a new printer/plotter in our office and Autocad cannot find the old one and so I have to select the new one. Here's the scoop:
When I am in the layout tab, everything is perfectly aligned in my layout sheet (24 x 36) and so I type plot and before the dialogue screen appears (We just got a new plotter) Autocad says: "such and such printer: This plotter config. cannot be used for blah blah blah.... The None plot device has been substituted." Which makes sense because that such and such printer is non existent. So i click ok. and the usual plot dialogue screen displays.
I select our new plotter and the exact size of my layout sheet (24 x 36) and click apply to layout and then preview it and it shows the layout cutting off my titleblock on the right hand side. So I cancel the plot (having applied the new printer and 24 x 36 config.) and look at my layout and either my layout sheet or my linework has shifted about 3/4" up and 3/4" to the side.
Why did something shift? My layout sheet was already aligned and at 24 x 36. I don't want to have to move it every time especially if I need to print off older drawings which are set up with the non existent printer. Should I or could I make autocad ignore the old printer and tell it to recognize the new one so I wont ask me every time i open an older drawing?
Any lisp file that can plot all of the layout tabs? I am looking for one that will plot to a plt file and also pdf?
View 5 Replies View RelatedWhen in Paperspace and using the Plot icon and choose Printer Name "PublishToWebJPG.pc3" I get a JPG created that is size 32 bytes, but is empty.
I need to create JPGs of drawings for a document. I have attached an example DWG and a resulting JPG.
BTW: I did try using SAVEIMG - as JPG, TIF, PNG - it does create an image with the title block, but not the model content.
Plotting a drawing from layout produces crowded labels,
This is the second time I’m highlighting this issue. I couldn’t figure out how to print a drawing (attached) from the lay out. What I got is a very crowded drawing as shown in the screenshots below.
I wanted to print my drawings (contour, horizontal alignment, vertical alignment, etc.) in an A4 with a scale of 1/1000 or 1/1300. Then what should be:
The annotation scale?
The viewport scale?
The plot scale?
What did I get very crowded drawing when I tried to print from the layout?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I guess the title pretty much says it all Dashed lines in my drawing turn solid when i switch to the layout area, and when i try to plot. I've tried fiddling with line type scale, but it hasn't solved the problem. I've attached one of the drawings i'm having trouble with.
I think i might have figured it out, when i set lts to 0.05 the show up fine in the layout area, but in the drawing are it looks like the line type scale is way too low. why the dashed lines don't show up the same in the drawing and layout areas?