AutoCAD Civil 3D :: Plotting A Drawing From Layout Produces Crowded Labels
Mar 1, 2013
Plotting a drawing from layout produces crowded labels,
This is the second time I’m highlighting this issue. I couldn’t figure out how to print a drawing (attached) from the lay out. What I got is a very crowded drawing as shown in the screenshots below.
I wanted to print my drawings (contour, horizontal alignment, vertical alignment, etc.) in an A4 with a scale of 1/1000 or 1/1300. Then what should be:
The annotation scale?
The viewport scale?
The plot scale?
What did I get very crowded drawing when I tried to print from the layout?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
ADVERTISEMENT
Jun 15, 2011
I am running CAD Map 3D 2011 and a Windows XP SP3 machine with 4GB RAM and a 128 MB 3D card. I am trying to send the plot to a HP Designjet 800PS plotter.
The file that I am working on is not overly large and has no raster images or OLE objects attached. It does have several open database connections that I am using to theme one of my drawing layers. The sheet itself is an odd size (36" x 54"), but I have printed other drawings of this size before and I've never had problems.
When I first plotted the sheet, it was taking forever to spool, so I ended up canceling the print several times. I finally decided to try to plot to PDF, but this created a HUGE spool file (2.65 GB). Since it was actually spooling, I went ahead and let it run. It ended up taking about an hour to spool and print the PDF. Before I opened the PDF, I checked the size and found it to be about 12 Mb. When I opened it, all that was there was a blank sheet. After that, I re-sent the plot to the HP plotter and just let it work overnight. When I got in this morning, there was a 36" x 54" blank sheet waiting for me.
I've checked the basic settings and none of the layers are frozen, off, or set to not print. I also increased by page file size to work with the plot, but that does not seem to have had any effect. I've tried creating several different .pc3 files, but the issue has stayed. I am now trying to have another person open the file and print it from a different workstation, but so far no luck.
As a side note, I tried a work around by plotting to a dwf file using the included dwf driver. This spooled and plotted very quickly (<60 seconds) and the dwf file appears just fine in design review. However, when I try to print from design review, it won't let me set it as a 36" x 54" plot; it keeps with with the standard print sizes only.
View 1 Replies
View Related
Nov 28, 2012
I'm using Civil 3D 2012. When it generates labels (alignment stationing, profile station & elevation, etc.), it keeps generating them in layer 0. It does not matter how I change the styles to the layer that I want.
It allows me to change the properties of the labels to the layer that I want after the labels have been generated. They look ok on my computer screen.
However, when I plot the plans, the labels do not follow the lineweights that the layer should be on. I think it still plotting as if it was layer 0. If I explode the labels, I can get them to plot correctly by changing the layer.
View 6 Replies
View Related
Jul 10, 2012
I have created an alignment, and have the stationing labels on a different layer than the actual alignment linework. I have frozen the layer with the alignment on it in a viewport, but not the layer with the labels. However, when I regen, the labels disappear. I need to have the labels visible, and the linework off.
View 4 Replies
View Related
Sep 17, 2013
When I have my alignment labels and plan view text align to the layout view in Paper Space they plot out very bold.
I am using Style: Swis721 BT-Italic. I use that style in the profile for labels and in plan view. When I plot out the sheet the profile view plots good but the text that was aligned in the plan view is very bold.
View 5 Replies
View Related
Feb 26, 2013
I have a number of problems with alignment labels showing up in layouts that I don't want to show or want to show up differently,. Is there any way to label an alignment in paper space (layout)? (or any other type of label).
View 3 Replies
View Related
Apr 3, 2012
We are working on a file here and the lables on the drawing are missing. We had station offset lables in our drawings and are now missing from the plans.
View 3 Replies
View Related
Dec 7, 2012
Is it possible to rotate the point labels when working with point files from an elevation Survey in Ciivil 3D? When activating the labels visibility they are horizontal, but when I rotate the drawing to a side view I am can´t see them.
So far I was working with Autocad (importing a dxf). Is there a way to rotate at the same time all the points labels, wich in this case are just text items?
View 4 Replies
View Related
May 14, 2013
So I have a survey of a roadway that was created 15 years ago and was converted into autocad civil 3d 2012. No problems there, however, I am going through the survey and rotating the COGO points (ie Traffic Signs, Utility Poles) and the text to be parallel to the roadway. I am in UCS World and have no problems rotating the points and text to what I want. THe problem starts when I rotate the drawing using UCS 3P so that I am looking at a portion of the roadway that is parallel to my computer screen. Now the text and orientation of the signs etc are no longer parallel to the roadway and did not rotate when I rotated the entire project.
Now I was under the impression the points were to rotate automatically to what I set them as, ie parallel to the roadway. I'm sure this is an easy fix or I am not understanding something.
View 1 Replies
View Related
Dec 19, 2013
How can I make sure the annotated surface labels spot elevations from my 3d design drawing which is being xrefed into a new Precise Grading Breakout Sheet plots screened?
The Label Style which I created for the annotated surface label spot elevations has all its properties set to be ByLayer for example its color and lineweight. The Layer I assigned the Label Style was assigned to a layer with a color and plot style that should plot any object screened. Color 8 and Plot Style Screened.
What other steps am I missing to assure myself that this Label Style will plot screened in my new Precise Grading Breakout Sheet?
I also made sure that the xref drawing in which this Surface spot elevation has the correct colors and lineweights and Plot Styles in my new Precise Grading Breakout Sheet.
View 5 Replies
View Related
Mar 19, 2009
I have labelled features in a shp file and it appears fine on the screen. They even appear when I do a print preview but when I actually plot it the labels do not print? How I can get them to print?
I am trying to label highways using the route number attribute in the dbf file associated with the shp file. I was able to label the features using the style editor and using the display manager. It seemed fine and worked great until I went to print the maps off.The labels are dynamic and scale with the drawing I am sure this has something to do with it. Is there a way to have these labels be static?
View 9 Replies
View Related
Mar 15, 2011
Added as shapefile via FDO. Labeled the features using the Style Editor. The labels show up clearly on-screen. But when plotting, either to PDF or hard copy, the labels move so that they overlap one another and are not legible.
how to keep the labels from moving? visible labels on-screen and the PDF of how the labels move when plotting.
View 1 Replies
View Related
Mar 8, 2013
my plot file names don't include the drawing name, only the layout name. it used to include the drawing name. i must have changed something but i don't what.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
View 2 Replies
View Related
Jun 27, 2013
I've searched this Discussion Groups area on the site and have found a couple solutions. I've tried them all but I can't seem to figure out how to get ALL of my labels to display when I plot or when I export to PDF. It seems that only the POLES layer labels are having trouble showing up...
I understand scaling and it doesn't seem to be the issue. I've tried plotting under different scales, and I still get the same thing.I've attached an image showing the outcome.
On the left is the PRINT PREVIEW in AutoCAD.
On the right is the EXPORTED PDF.
I've checked in the administrator under POLE LABELS, and changed a couple things around but I can't seem to get the pole labels to show up.
View 3 Replies
View Related
Dec 27, 2013
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
View 2 Replies
View Related
May 3, 2013
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
View 9 Replies
View Related
May 27, 2013
I would like to create a sheet drawing that has two plan views or two profile views on the same layout?
View 2 Replies
View Related
Apr 7, 2013
I am trying to plot a paper space as JPG, the drawing scale is 1:1 the paper is the size an a4 page, I tried using the publish to web JPG.pc3 but the lines come out as gray and faint, I tried all the different combination of pixels and scale but without success!
View 5 Replies
View Related
Jul 4, 2012
I made a 90 meter box in model, created a titleblock and added a viewport in layout. The viewport scale is 1:1. Plotting scale is 1:1. It just dawned on me that because everything is 1:1.... I should have a peice of paper 90 meters long. My thick head has managed to confuse me, Does Cad apply a scale to the viewports even though its set 1:1 and plotted 1:1?
View 9 Replies
View Related
Sep 4, 2011
If I used millimeters as my UNITS, how can I scale them when plotting it into A1 or A0? How will I know the scale that I will use in Layout tab so that it will fit on the paper that I will used?
View 9 Replies
View Related
Nov 29, 2013
Size of labels in model and layout modes,
I couldn’t figure out how the label size is controlled at the layout mode. Please, have a look on the two attached screenshots that shows the label size in model and layout modes.
View 2 Replies
View Related
May 27, 2013
This error happened to us, when we tried to get the active layout from the acad document. We are using AutoCAD 2009 & C#.NET 4.0 Framework.
The error is as below:
Unable to cast COM object of type 'Autodesk.AutoCAD.Interop.Common.AcadLayoutClass' to interface type 'Autodesk.AutoCAD.Interop.Common.IAcadLayout'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{C6F55F5A-33AF-4B5F-9949-86C6AEEF1834}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
The piece of snippet looks like the following
using Autodesk.AutoCAD.Interop.Common;
AcadApplication acadApp = (AcadApplication)Marshal.GetActiveObject("AutoCAD.Application");
AcadDocument acadDoc = acadApp.ActiveDocument;
//The following line throws the error as stated above
AcadLayout aLayout = (AcadLayout)acadDoc.ActiveLayout;
But it can be accessed if we change the property " Embed Interop Types " of DLLs (a) Autodesk.AutoCAD.Interop
(b) Stdole
from True to False
But again it throws the same error when we try to retrieve any methods from the retrieved AcadLayout. The whole application works fine with AutoCAD 2012 after re-referencing the DLLs.
View 1 Replies
View Related
Dec 17, 2012
I have floorplans from a building with a total of 80 appartments. Now i want to plot PDFs in A3 format, each page with 1 appartment. That would be 80 pages/PDF-files.
The way i did it up to now was i have put all A3 pages in a single layout and used the Window-function in the Plot dialog to print each page individually, manually numbering the file-names, and combining files in Acrobat as needed.
But doing this for 80 pages is too much - especially because i will likely have to plot it more often in the future. As far as i can see, i could make 80 layouts and use the Publish function, make a sheet-list and plot that way.
I keep wondering - is there not a more efficient solution to this problem than creating 80 layouts? There must be a more intelligent solution to this. Whats the preferred way of doing this?
P.S. i use AutoCAD2007 and Acrobat for plotting.
View 9 Replies
View Related
Oct 31, 2012
We have a new printer/plotter in our office and Autocad cannot find the old one and so I have to select the new one. Here's the scoop:
When I am in the layout tab, everything is perfectly aligned in my layout sheet (24 x 36) and so I type plot and before the dialogue screen appears (We just got a new plotter) Autocad says: "such and such printer: This plotter config. cannot be used for blah blah blah.... The None plot device has been substituted." Which makes sense because that such and such printer is non existent. So i click ok. and the usual plot dialogue screen displays.
I select our new plotter and the exact size of my layout sheet (24 x 36) and click apply to layout and then preview it and it shows the layout cutting off my titleblock on the right hand side. So I cancel the plot (having applied the new printer and 24 x 36 config.) and look at my layout and either my layout sheet or my linework has shifted about 3/4" up and 3/4" to the side.
Why did something shift? My layout sheet was already aligned and at 24 x 36. I don't want to have to move it every time especially if I need to print off older drawings which are set up with the non existent printer. Should I or could I make autocad ignore the old printer and tell it to recognize the new one so I wont ask me every time i open an older drawing?
View 4 Replies
View Related
Jul 22, 2004
Any lisp file that can plot all of the layout tabs? I am looking for one that will plot to a plt file and also pdf?
View 5 Replies
View Related
Mar 5, 2012
When in Paperspace and using the Plot icon and choose Printer Name "PublishToWebJPG.pc3" I get a JPG created that is size 32 bytes, but is empty.
I need to create JPGs of drawings for a document. I have attached an example DWG and a resulting JPG.
BTW: I did try using SAVEIMG - as JPG, TIF, PNG - it does create an image with the title block, but not the model content.
View 3 Replies
View Related
Mar 24, 2011
I guess the title pretty much says it all Dashed lines in my drawing turn solid when i switch to the layout area, and when i try to plot. I've tried fiddling with line type scale, but it hasn't solved the problem. I've attached one of the drawings i'm having trouble with.
I think i might have figured it out, when i set lts to 0.05 the show up fine in the layout area, but in the drawing are it looks like the line type scale is way too low. why the dashed lines don't show up the same in the drawing and layout areas?
View 2 Replies
View Related
Feb 27, 2013
I have a bit of a problem with Autocad map 3d 2012. When i try to insert a scale bar or a north arrow or any other carthographic element i simply can't find the layout elements that are supposed to be in layout tools tab. I've done a lot of research online and can't come up with anything.
View 2 Replies
View Related
Apr 17, 2013
Is it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
View 1 Replies
View Related
Mar 7, 2013
I want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))
View 8 Replies
View Related
Feb 5, 2012
I often have an issue when trying to move an object on a layer crowded zone.
I select the right layer through the layer dock. But when I try to move my object, some auto selecter is probably ON and it selects another layer (that probably was right under my mouse) Any way I could disable that ?
When I used to use photoshop that was an easy obvious option "AutoSelect Layer" I don't get it how to do this in gimp
View 3 Replies
View Related
