I am curious how the default workspace “3D Modeling” is able to combine ribbon panels from both the acad.cuix file and the modeldoc.cuix file in one tab. See attached screen shot to see where I highlighted the differences between the tab in the workspace and the tab in the acad.cuix file. I am trying to recreate this in my workspace without having two separate layout tabs.
View 2 RepliesI am looking to import an Inventor file and create views of it in AutoCAD 2013, However this is what appears under my Layout ribbon.
View 9 Replies View RelatedIs it possible to show two different viewports in the same layout that show views from two different drawings? So one viewport would show a section of the current drawing's modelspace, and the second viewport would show a a section of modelspace from another drawing? (and possibly update automatically like an XREF?) Or would the easiest way be to just XREF both drawings into a new drawing, and then show viewports from them in the new drawing?
View 3 Replies View RelatedI need to create a section of a 3d model. Unfortuntaly the layout tab I need is missing. Normally if somthing is missing I type 'CUI' and then click Ribbon>Tabs> select the one I want and drag it to 'Workspaces Contents' - 'Ribbon Tabs'
The ribbon tab for layout is missing from the cui. See attached images.
How can I get the Layout Ribbon Tab back quickly?
Tutorial I am trying to follow; [URL] .......
i miss my "create view" etc. buttons in my layout ribbon. Where can i find an option to make them visible?
View 4 Replies View RelatedI have a lot of sheet DWGs with a single layout in each. The layouts have several viewports into model space.
Is there a way to export out the layout tab where the viewport contents have been converted and placed into the layout space?
Ideally, I'm hoping to basically convert the viewport heavy paperspace into a dumb model space layout.
I wanted to know why is it that everytime i create a layout as a pdf on a4 the dashed lines ( non printable area) size is different?
View 3 Replies View RelatedHaving trouble with diameter and radial dimensions since upgrading to 2013.
For example, draw two concentric circles and Presspull (or Extrude and Subtract) so that you get a hollow cylinder. Then create a viewport of this solid in a layout, and try to dimension the inside and outside diameters.
One of the two dimensions will work properly (seems to vary which one). The other will magically "jump" when placed (ex. the OD dimension will jump and become the ID, or vice versa).
How to resolve this? Our guys are having to do absurd things like redrawing the circle in paper space and dimensioning to it with a scale factor. Is this some sort of 2013 bug, or a setting?
Inventor 2013
Windows 7 64 Bit
I wrote a program to separate drawings with multiple layouts into several drawings. The problem I'm running into is even though there is only one viewport in the layout.the program is finding two. One has the right viewcenter, width and height the other is wrong.
View 1 Replies View RelatedI made a 90 meter box in model, created a titleblock and added a viewport in layout. The viewport scale is 1:1. Plotting scale is 1:1. It just dawned on me that because everything is 1:1.... I should have a peice of paper 90 meters long. My thick head has managed to confuse me, Does Cad apply a scale to the viewports even though its set 1:1 and plotted 1:1?
View 9 Replies View RelatedMy drawing will only allow 3 viewports in each paperspace layout created. When I try to add or copy more than 3 viewports previous viewports created will go blank and cannot be activated anymore. I have never had this issue before, is there a setting that can fix this problem? I am running AutoCAD Architecture 2010
View 2 Replies View RelatedI am printing a Layout that has 3 Viewports. The View ports are of an aerial photograph that is a 600DPI TIFF file about 1GB in size. When I print the single sheet 24x36 the PDF file is 75mb
I am new to Acrobat X, I had been using version 7. I remember there being a reduce file size option in the old version but I cant find it in X.
Any tips on getting the printed PDF file smaller? Is it something I can do in AutoCAD or Acrobat?
Details:
AutoCAD 2010
Win 7 Machine
8GB RAM
2.8 ghz i7
Adobe Acrobat Pro X
Using 2008LT/2012LT...I am working on a job that is being done in phases. I want to show one phase as per pen assignments and other phases in a grayscale. Is there a way to do this when plotting or do I have to change the viewport display individually for the grayscale vps?
View 3 Replies View Relatedwhen I insert a block that is made up of different layer lines and shapes then they only show up in the model tab. The other layouts I have won't show the blocks even though the same layers are turned on and unfrozen in these other layout viewports just like the model space. It's looking like trying to use multilayer dynamic blocks will be pretty useless unless they work in every layout viewport and not just in model space.
View 5 Replies View RelatedI have a drawing file with lots of layouts, some of which have multiple viewports. I want to create a new layer and use it in just a few viewports. Is there a way to set the default vpfreeze setting to frozen for new layers? That way I can just thaw it in a few viewports instead of trying to vpfreeze it in a lot.
LT, C3D 2005 - 2014
XP, Vista, 7
Here is a problem I am having in autocad 2011 and is very annoying dimentioning 3d modes in paper space the viewport line obscures any line in layout space that corsses it I have tried all the usual tricks send above bring to fron etc Ive frozen and turned off the viewport line etc nothing works!!
it only happens with 3d objects what I do when detailing something is keep the 3d model then create flatshots of the object i need to detail thendimentions the flat shot objects however if any single 3d element is in themodelspace I get this obscured dimention crap it is funny i dont recall this being a problem in version 2006 am I missing something or is autocad 2011?
OK I worked around this by making sure the viewport for the object I am detailing is set to 2D wireframe however i would like to add some notes to the 3d model through the viewport without turning the model from conceptual to wireframe.
After drawing in model space(1:1 Scale) I then dimension as needed using Annotative Dimensions, Multileaders and MText using the same 1:1 scale. But when I create the variuos viewports on my layout pages the dimensions aren't scaling to the viewport scale.
This is where it may be partly my fault; When I first started using annotative dimensions etc. a box would pop up asking what scale to use. Because I am dimensioning in model space, rather than always seeing this text box I selected "Do not ask again" check box to always use 1:1 scaling.
These are some of the other settings in place;
ANNOAUTOSCALE = 4
Annotation Visibility = ON
Automatically Add Scales = ON
In ACAD 2012 if there is two viewport in a layout hatch shows up as solid. I tried the same in ACAD 2011 and everything works ok.
View 4 Replies View RelatedI would like to be able to access the new north arrow feature of Map 3D 2013 to my Civil 3D ribbon but I can not find which ribbon element to add. How can I accomplish this?
View 3 Replies View RelatedI have 2 quick questions:
1- How do I turn OFF the display of Layers in Layout viewports, but they remain ON in the Model?
2- How do I rotate a group of objects to match my orthogonal UCS?
I need to select all the viewports in the drawing and to make some changes with them, I'm planning to select them all with ssget command. If I do that I will have one viewport for the paperspace itself in every layout. One of my question is, how to know which viewport is the paperspace itself?
Second question is, how to get the name of layout in which one is the viewport? It is important to me that the lisp is really fast, so I'm planning to do the most of stuffs with vla commands.
I am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
check and see if there is a "Modeldoc.cuix" file included in your Civil 3D directories anywhere?
This would include under your user profile, and under C:Program FilesAutodeskAutoCAD Civil 3D 2013
All of a sudden my ribbon panels will not pull off... some refer to this as 'tear off'. The interface is not locked either.
View 5 Replies View RelatedI used pdf attach to insert a pdf into the drawing. I have a plan drawing with viewports that references the drawing file. I tried to turn off the layer in one viewport while leaving the layer turned on in another viewport but i could not get it to plot correctly. It's off in my drawing but when i go to plot its on in all viewports. What is the reason that this happens? my plan file is too large i may have to post it seppartly
View 7 Replies View Relatedwhen it comes to viewports in paperspace in 2013, due to the nature of my work i have several layout drawings all drawn on top of each other and all with ther own txt and dims etc, which again is all on top of each other making it impossible to work in model space, for this reason i work in paperspace within a viewport but now i have upgraded to 2013 while i am in mid command e.g. dimension and zoom into first point then zoom back out and in again to second point, by this time i have been kicked out of the viewport and just in paperspace so cant complete the command, doesnt always happen?
View 9 Replies View RelatedI have drawn my model and am trying to put it into viewports. I have followed the tutorials provided to the letter, but when I create the viewport nothing shows up.
View 1 Replies View RelatedOn one of my drawings which was created by someone else, the viewports don't have boxes around them. When you click on them in paperspace, it bring you into model space, and when you click on detail it opens up, but cannot expand viewport., you can't delete it. I want to expand it to bring in detail which is bigger now.
View 2 Replies View RelatedI want to create a hot key that will lock viewports on/off. The command is MVIEW / L / ON OR OFF. What I would like to do is have VPL lock viewports and VPLL unlock viewports. How can I do this?
View 1 Replies View RelatedI'm using Autocad 2013, and im trying to freeze layers in certain viewports, but the VP freeze/thaw button is greyed out for all my layers and wont allow me to freeze anything. I dont want to use the New viewport freeze/thaw button.
View 1 Replies View Relatedi have
Dwg A: Circle & Square is drawn in the model space and 2 Viewports in Paper Space annotating the 2 objects
Dwg B: Triangle is drawn in model space and 1 viewport in paper space annotating the triangle
i want to bring the Square detail (model and viewport with annotation) from Dwg A to Dwg B,while copying the Square and pasting it in Dwg B with the same reference points, i am having the square object over the Triangle in model space.I do not want to move the triangle since that is matched with the viewport on the paper space and annotated
i want to move the Square to a new reference (while pasting) BUT in a way to have the layout annotations matching and being asscociated with it,