I have a bit of a problem with Autocad map 3d 2012. When i try to insert a scale bar or a north arrow or any other carthographic element i simply can't find the layout elements that are supposed to be in layout tools tab. I've done a lot of research online and can't come up with anything.
I need to create a section of a 3d model. Unfortuntaly the layout tab I need is missing. Normally if somthing is missing I type 'CUI' and then click Ribbon>Tabs> select the one I want and drag it to 'Workspaces Contents' - 'Ribbon Tabs'
The ribbon tab for layout is missing from the cui. See attached images.
I am curious how the default workspace “3D Modeling” is able to combine ribbon panels from both the acad.cuix file and the modeldoc.cuix file in one tab. See attached screen shot to see where I highlighted the differences between the tab in the workspace and the tab in the acad.cuix file. I am trying to recreate this in my workspace without having two separate layout tabs.
I am trying to customize Autocad 2012 ribbon tab. I can't seem to find how to mimic the small arrow that appears in several of the standard menus. For example, in the 3D Solids - Home Tab, the second panel from the left is "3D Solids Home - Mesh" It has a small arrow in the corner that opens up a preferences dialogue box.
How can I add that arrow to a custom panel with that little arrow so that I can add my command to it?
I am using Civil3d 2011 and the ribbon will not display. The button seem to work some times but I can't see the ribbon, QAT, or Infocenter. I tried relaoding the CUI files, updated video card drivers, Civil3D patches, even uninstalled and reinstalled Civil3D.
I can turn the ribbon off (ribbonclose) and the ribon area is rendered correctly on the screen. I can turn the menubar on/off and it works just fine.
I tried logging on to the computer as different user, as the administrator, etc. Same error.
I use the Ribbon but now I can't because I can't see it.
I saw some source that hinted you could use panel1Panel.AddSlideout() but in the search I do not see any Ribbon API that allows for any slideout functionality?Do you *have* to use the CUI API for this?
We recently installed Civil 3D on our computers. Some people started working in regular AutoCAD first rather than changing the workspace in Civil 3D. They have customized their ribbons. Is there a way we can copy those customizations and apply them to the 2D Drafting & Annotation workspace in Civil 3D?
Lately, whenever Civil 3D crashes, my menus and ribbons would freeze, but my command line still works. It's like the entire user interface locks up. I'm able to workaround the problem by rebooting the computer and then recovering any drawings I had open at the time of the crash.
-Civil 3D 2013 sp2 -Windows 7 64-bit -Intel i7 Dual Core with 2.40 GHz -8 GB of RAM -AMD Radeon HD 6770M -Civil 3D user since 2007
My IRM officer had to install some sort of update to my AutoCAD Civil 3D 2010 package. When I loaded AutoCad, it gave me a message where my ribbon was that "The Ribbon does not have any tabs or panels currently loaded." I was able to fix this with the WSCURRENT command, but when I switch to the "Task-based Geospatial" or the Tool-based Geospatial" module, I cannot get the Ribbon back.
I would like to add a Rebuild Surface command to my Ribbon Modify Panel. I would also like to have it included in my Right Click menu after a surface is selected. There doesn't appear to be any way to initiate a surface rebuild from the command line and I don't find a command for it in the CUI editor.
There does seem to be a rebuild command in the API but I am not a programmer. Is this possible without programming?
I created a Net dll plugin and successfully loaded in Civil 3d 2014 with NetLoad command, the plugin contains a ribbon bar with a ribbon button launching a dialog.., but when To be Loaded automatically (by AutoLoader) at startup it did'nt load, is there any way to make it load automatically at Civil 3d start up
I have a cuix setup as an enterprise menu. The drop-down menu loads up fine in my workspace. However, when i go to customize the workspace, and add the ribbon portion of the cuix, it fails to load it. The same enterprise menu loads fine in AutoCAD 2011.
I am using Civil 3D 2014. When click any of the buttons in the Trimble Link Ribbon, I get the following message:
TRMBIMPORTDATA Unknown command "TRMBIMPORTDATA (Or whatever command that had been issued)". Press F1 for help.
Another user in our office has everything in the Trimble Link work fine. We have tried upping my status to administrator for my computer, and that didn't work. When I installed CIvil 3D, I checked every button to be installed in the infrastructure design suite package....
I'm trying to import some label and table styles from another drawing and can't seem to do it. I followed the tutorial offered here until I got to the "Manag" ribbon in my Civil 3D and found that the Styles "import Export" option is not there.
I've never cared for the Ribbon. IMO it takes up a lot of valuable screen real estate and spreads out commands I find to useful to be grouped together across multiple menus. I did like how the Menu Bar was laid out in LDD because all the commands for anything I could do with alignments, for example, were all in one place.
Here's how I set up C3D to have an UI more like LDD:
1. Show the Menu Bar: click on the dropdown menu button on far right of the Quick Access Toolbar (at the upper left of the C3D screen) and select Show Menu Bar. Old familiars like File, Edit, Points, Alignments, etc should be visible.
2. Get rid of the Ribbon: type RIBBONCLOSE into the command line and ta-da!
When I try to access a hatch pattern from the Hatch Creation Ribbon Contextual Tab, C3D stops working and I have to force the program to quit. I've tried repairing the installation, which didn't work. I've also compeltely uninstalled and then reinstllaed the program, and have applied the Service Pack 1 update, but the problem persists.
However, accessing a hatch pattern after using the "Hatch" command from the command does seem to work.
getting Civil 3D to crash every time the Map Task Pane is opened from the Ribbon? if you type in MAPWSPACE, then it seems to "initiaite" it to work ok, but if you go right to the Ribbon: View tab > Palettes panel, and click it on there, it crashes every time.