AutoCAD Civil 3D :: Multiple Object Select Ribbon TAB - How To Customise

Jul 23, 2012

Mainly, I would like to find it the "Multiple Object Select Ribbon" in the CUI editor, and change its "CONTEXTUAL DISPLAY TYPE" from FULL to  MERGED, if this is possible.

View 1 Replies


AutoCAD Civil 3D :: Stop Ribbon From Changing All Icons Whenever Clicking On Object?

Oct 19, 2012

is there a way to stop ribbon from changing all those icons whenever you clicking on an object? because my computer at work is a bit slow and each click like that on a large civil 3d profile has a slight delay which that time adds up to reduced productivities. and i am clicking 500 times a day since there are 500 vertices to modifiy on say this alignment.

everytime you click on an object the ribbon changes which takes up cpu time due to running a bunch of codes to populate the icons on the ribbon. tried closing ribbon doesn't work still have the delay when mouse click on an object to show the grips. oh well maybe it's showing the grip that's using the cpu. but how can you say for sure without turning one feature off at a time to test?

Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710

View 5 Replies View Related

AutoCAD 2013 :: Quick Select Only Shows Multiple Under Object Type

Jun 12, 2013

Civil 3D 2013
Windows 7 x64

I've found several people that had this problem through searching, but none of the fixes worked for me.  I'm unable to use the quick select feature as it does not list anything other than "multiple".  I've tried different files, different selections, repaired the installation, complete reinstall, updated with SP1 and hotfix 3 to no avail.  I also have Autocad 2007 with SP 1 installed, as well as Autocad Architecture 2014, if that makes a difference.

View 9 Replies View Related

AutoCAD Civil 3D :: Select Alignment Via Object Id

Oct 13, 2013

I have a data grid view with all alignments included in the drawing file. If I choose an alignment in data grid view, I have Id of that alignment.

I have a button, and I would like that if i press that button then selects that alignment in the drawing(graphic). I would like that there was only one object selected, and if there are more selected objects before,then un-selected them.

I have seen in internet, the code snipset:

"Autodesk.Autocad.Internal.Utils.SelectObjects(objectId[ ] Ids)"

Is it obligatory that objectId be able a List or array?



But I don´t understand them. Are there any full samples about his?

View 1 Replies View Related

AutoCAD Civil 3D :: Select By Object Data?

May 22, 2013

We have a perenial problem with our old GIS software where files corrupt and drawing objects are lost.

There are few export options available, but export to shape is one of them. This means that I can export a damaged file and then import it into CAD with the layers intact and the tagged numbers (similar to object data or a block attribute in CAD) imported as object data. In order to make a new uncorrupted version for the GIS program.

Is there a way to select objects by object data?

If a file is corrupted, the only real way to repair it at the moment is to go back to the original cad drawing and reimport and then retag every single tagged attribute on what can be thousands of drawing objects, and by then we may no longer have the handdrawn data to even do that.

The next workaround is if I creat new dwgs from the cad drawing, Each one containing the objects with the same object data, and each saved with a file name that matches that object data, and then reimport into the GIS. (it can use the filename as a tag). This creates a new GIS file with the surviving information that should not lose any more data and we may be able to patch the 'holes' afterwards.

The problem is selecting all the polylines in the cad drawing that have that same tagged number in the object data. Select similar just goes on object type and layer. This would be easier if I could select by object data and get everything with the same tag in one go.

A way to batch create the new dwgs from that selected data would be nice too.

C3d 2013

View 9 Replies View Related

AutoCAD Civil 3D :: Creating Alignment With Select Object

Nov 2, 2012

 I have a problem when i create an alignment with Select Object. The Chainage is not coming properly.

And here i attached the Print screen.

View 3 Replies View Related

AutoCAD Civil 3D :: How To Copy Object Multiple Times In A Curve

May 9, 2012

Trying to find out how to copy an object multiple times in a curve. I've used microstation and it does it easily and just wandering is AC has the same type funtion without going throught 6-8 steps for each copy.

View 9 Replies View Related

AutoCAD Civil 3D :: Programmatically Edit Multiple Object Styles?

Jan 29, 2013

we use Civil 3D as a design tool, and sometimes in the finished (plotted) product.  We use STB (named) plot styles and layer settings to control object display.

I have a situation where I have received a drawing that is populated with Civil 3D styles already.  However, in the Display tab, all the object Plot Styles are set to ByBlock.  That does not seem to work properly with .STB plot style management, because the individual objects (contours, points, etc.) pick up the plot styles of their parent objects.  So instead of a contour on layer V-TOPO-MAJR plotting with the layer settings of V-TOPO-MAJR, it follows the layer settings of C-TOPO, which is the layer containing the parent surface.

Is there a way to programmatically step through styles for surfaces, profile views, etc. and change the "ByBlock" setting to "ByLayer" in all styles?

View 1 Replies View Related

AutoCad :: Quick Select Command Value To Select One Type Text Or Other Object

Oct 26, 2011

In Quick Select command function, I want to use more properties value to select one type text or other object.

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: How To Customise Snap Commands To F Keys

Feb 10, 2009

Im using AutoCAD 09 for the first time and need to find out how to customise my snap commands to F keys. I've been using 2004 and it was really easy. 09 seems to not allow it?

for example i set F4 to end point and F5 to intersection point etc. it saves using O snap or a tab. just L, F4 and its done (for example)

View 4 Replies View Related

AutoCad :: Shift Select To Select Multiple Objects?

May 15, 2008

Right now, when i click one object and then another, the first object becomes deselected. Holding shift is the only way for me to select multiple lines right now (other than dragging of course) but that's not what I'm used to and it annoys me a lot. At first everything is fine but then after a while it does this without me changing any options at all.

View 9 Replies View Related

AutoCad :: How To Select All Object Or Line With Single Select

Oct 4, 2013

master im new in autocad 2014....i have a problem now when i select line or object it highlight or make a broken line....but when i select the other object or line my previous selected back to normal..i mean i can select only one line if i use single to select all object or line with single select continuously, except using hold left click...

View 1 Replies View Related

AutoCAD 2010 :: Select Object And Pan To Another Selection - First Object Deselects

Jul 20, 2011

When I select an object and pan to make another selection the first object "deselects".  The object(s) will stay selected until I pan and as soon as I start to pan the grips go away and the object(s) is deselected.

View 9 Replies View Related

AutoCAD 2010 :: Combine Multiple Add-Ins Ribbon Tabs?

Feb 1, 2012

Have installed 3 Autodesk Exchange add-ins and they each create their own ribbon tab named "Add-Ins". Is there an easy way to combine them into the same ribbon tab?


View 7 Replies View Related

AutoCAD 2010 :: Changing Object Properties In Ribbon

Sep 25, 2012

I am having an issues that I am unable to change the properties of a selected object using the tools located within the ribbon. Instead I need to go through the properties popout to change them.

for instance, I seclect a line and want to change the layer from A-wall to A-door. I try to change it using the drop down layers located within the ribbon, but it does not change. however If I do the same only though the properties popout window I can change it.

Is there toggle that I accedently switched?

View 3 Replies View Related

Photoshop :: Move Tool Auto Select Is Not Capturing Multiple Objects Upon Drag / Select

Jun 18, 2013

I know this discussion title is a bit murky, but the problem is a bit odd.  I have Photoshop CS6 v13.1.2.  In this version, I will activate the Select Tool, check Auto-Select: Layer, check Show Transform Controls, and then while using the Select Tool I will drag to create a rectangle to select multiple layers with content within the specified area. 

Unfortunately, this action only works when I begin the selection from outside of the canvas area.  If started from within the canvas area, no rectangle will appear, it will show me a measurement of my selection size, and then no layers will be selected upon release.
This cannot be working as intended right?  I mean multi-select dragging cannot be intended to only work when started outside of the canvas right?  Is there some way to fix this issue?  Is this a bug?  See the images below for more information on this issue.

View 5 Replies View Related

3ds Max :: How To Select Object By Select From Sense Option

Aug 30, 2012

I trying in max 2012 to select some object(object count 600)by select from sence option but this selection process is taking long time.

View 2 Replies View Related

CorelDRAW Graphics Suite X4 :: Select Object Under Artistic Media Brush Object

Sep 17, 2011

have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object

View 2 Replies View Related

Illustrator :: Drag To Select Over Object For The Objects Inside That Object?

Aug 11, 2013

How do I drag to select over the top of objects without selecting and moving the objects under the mouse when I begin the "drag to select" motion?

View 2 Replies View Related

AutoCAD Civil 3D :: How To Get The Ribbon Back

Mar 8, 2012

C3D 2012'

I accidentally closed the ribbon or the tools.. whatever you want to call it that were in the red rectangle in the picture.. How do I get it back to normal?

View 2 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Customize Ribbon Panel In Ribbon Tab

Nov 28, 2012

I am trying to customize Autocad 2012 ribbon tab. I can't seem to find how to mimic the small arrow that appears in several of the standard menus. For example, in the 3D Solids - Home Tab, the second panel from the left is "3D Solids Home - Mesh" It has a small arrow in the corner that opens up a preferences dialogue box.

How can I add that arrow to a custom panel with that little arrow so that I can add my command to it?

View 4 Replies View Related

AutoCAD Civil 3D :: No Command Works From The Ribbon?

Feb 24, 2012

No command will work from the Ribbon.  I've changed workspaces and tried a backup CUI file.  Is my system corrupt or is there some setting that displays the ribbon, but disables the commands within it?

View 2 Replies View Related

AutoCAD Civil 3D :: 2011 - Will Not Display Ribbon

Feb 11, 2013

I am using Civil3d 2011 and the ribbon will not display.  The button seem to work some times but I can't see the ribbon, QAT, or Infocenter.  I tried relaoding the CUI files, updated video card drivers, Civil3D patches, even uninstalled and reinstalled Civil3D.

I can turn the ribbon off (ribbonclose) and the ribon area is rendered correctly on the screen.  I can turn the menubar on/off and it works just fine.

I tried logging on to the computer as different user, as the administrator, etc.  Same error.

I use the Ribbon but now I can't because I can't see it.

I have attached a screen shot of the ribbon area.  

View 5 Replies View Related

AutoCAD Civil 3D :: Have Subassemblies On Ribbon Interface?

Jun 11, 2013

I think tool palette with vertical tabs are a lot of unconfortable... 

Is there any way to have or to create a "mega-subassemblies-ribbon" ?

View 3 Replies View Related

AutoCAD Civil 3D :: Where Is Associative Array Ribbon Tab

Feb 2, 2013

Where is the Associative Array Ribbon Tab? I want to put into my Contextual Tab States for when I select my arrays. 

C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700

View 1 Replies View Related

AutoCAD Civil 3D :: Subscription Content To Ribbon

Nov 9, 2012

All my Subscription Content is currently accessed via the Toolbox in Toolspace. Can this content be put on a Ribbon panel (under the Plug Ins tab for example as in screenshot) for ease of access?

IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600

View 9 Replies View Related

AutoCAD Civil 3D :: How To Add Map 3D Layout Elements To Ribbon

Aug 20, 2012

I would like to be able to access the new north arrow feature of Map 3D 2013 to my Civil 3D ribbon but I can not find which ribbon element to add.  How can I accomplish this?

View 3 Replies View Related

AutoCAD Civil 3D :: Contextual Ribbon Doesn't Appear

Mar 17, 2012

When I select a design object such as an alignment or corridor the contextual ribbon fails to appear. I'm working on C3D2012 and the ribbon has always appeared before.

View 2 Replies View Related

AutoCAD Civil 3D :: Alignment Contextual Ribbon Tab

Apr 24, 2013

When i click on an alignment, the ribbon tab at the top doesn't show up. Here is my cui settings for Ribbon-Contextual Tab States-Alignment single selection.

View 4 Replies View Related

AutoCAD .NET :: Where Are Bits Of Ribbon API To Add Slide Out To Ribbon Panel

Jan 24, 2013

Where are the bits of the Ribbon API to add a slide out to a ribbon panel?

Autodesk.Windows.RibbonControl ribbonControl = Autodesk.Windows.ComponentManager.Ribbon; RibbonTab Tab = new RibbonTab(); ribbonControl.Tabs.Add(Tab); // create Ribbon panels Autodesk.Windows.RibbonPanelSource panel1Panel = new RibbonPanelSource(); panel1Panel.Title = "Panel1"; RibbonPanel Panel1 = new RibbonPanel(); Panel1.Source = panel1Panel; Tab.Panels.Add(Panel1);
I saw some source that hinted you could use panel1Panel.AddSlideout() but in the search I do not see any Ribbon API that allows for any slideout functionality?Do you *have* to use the CUI API for this?

View 5 Replies View Related

AutoCAD Civil 3D :: Copy Ribbon Customizations From Regular?

Sep 11, 2012

We recently installed Civil 3D on our computers.  Some people started working in regular AutoCAD first rather than changing the workspace in Civil 3D.  They have customized their ribbons.  Is there a way we can copy those customizations and apply them to the 2D Drafting & Annotation workspace in Civil 3D? 

View 3 Replies View Related

Copyrights 2005-15, All rights reserved