AutoCAD Civil 3D :: Trimble Link Ribbon - Unknown Command
Oct 23, 2013
I am using Civil 3D 2014. When click any of the buttons in the Trimble Link Ribbon, I get the following message:
TRMBIMPORTDATA Unknown command "TRMBIMPORTDATA (Or whatever command that had been issued)". Press F1 for help.
Another user in our office has everything in the Trimble Link work fine. We have tried upping my status to administrator for my computer, and that didn't work. When I installed CIvil 3D, I checked every button to be installed in the infrastructure design suite package....
View 7 Replies
ADVERTISEMENT
Jan 29, 2013
I installed the language pack, on my original autocad 2013(Chinese) has the ribbon, and the "RIBBON"command works, but on my another language pack autocad 2013 (English) there is no ribbon and the"RIBBON" command does not work, tells me ribbon Unknown command "RIBBON".
Does the ribbon function not work on the language pack autocad one?
View 6 Replies
View Related
Jan 27, 2010
I have installed Trimble Link for Civil3D 2010 and the menu will not appear in Civil3D anywhere.I re-installed it 2 times, which sucessfully completes, but to no avail.I checked cui and it's not there to add either.
View 4 Replies
View Related
Sep 11, 2012
I'm trying to import a .job file from our Trimble R6 GPS with Trimble Access software. I save the drawing and select import job. I have a device setup so I can navigate to the .job file, so i select the .job file and it starts to convert it, then i get the following error:
"
Unable to convert file.
Database Open Failed
File: [filepathhere] estjob.job.tic <--- not sure why it says .job.tic here its just a .job file
Select Abort to cancel the current operation
Retry to try again with this file
Ignore to skip this file and try the next.
"
If i hit retry it just keeps giving the same error, if i hit abort or ignore I get the following error:
"An error occurred during the file download. A required geoid model, datum grid or project grid file may not be available on this computer, or, This computer may need the "Update Office Software" option (from the Trimble Survey Controller CD) applied to it."
I've tried with Civil3D 2011 and 2012 both with Trimble Link installed for their respective versions. I have Trimble Business Center installed and updated along with Office Synchronizer. I went to Trimbles site and downloaded and installed all the update office software utilities in order in which they were released, the latest being April 2012. I tried uninstalling Trimble Link and reinstalling. I also downloaded and installed Trimble Office Configureation File Update Utility which last updated in August of 2012 and was suppose to update Trimble Link. I tried making a couple of test jobs on the data collector, some in state plane coordinates and some with no projection/no datum so a geoid file wouldnt be required, but they all return the same results. I've installed the geoid files on the collector using Trimble Link's Install Geoid and also added them to the Coordinate System Manager in Trimble Business Center.
I would like to convert using this utility because it gives azimuths and distances from our base receiver and I can use them to do adjustments after the job file has been converted to a fbk (fieldbook file).
View 5 Replies
View Related
Apr 27, 2012
I have always used the "XLIST" command to name the layer of x-refed objects. However, when I now enter the command, it says "Unknown command 'xlist.'"
I imagine this is a customization file issue?
View 1 Replies
View Related
Feb 24, 2012
No command will work from the Ribbon. I've changed workspaces and tried a backup CUI file. Is my system corrupt or is there some setting that displays the ribbon, but disables the commands within it?
View 2 Replies
View Related
Jan 4, 2014
After installing the VBA Module, I get the message "Unknown command "VBARUN"". I've rebooted, restarted and tried reinstalling the VBA Module to no avail.
View 4 Replies
View Related
Feb 22, 2012
The company I work for has just switched to Max2012 but my machine has a problem with it. I get this error on startup and whenever I open and close the ribbon:
-- Unknown property: "validobjfunc" in #StructolyBoost(undefined:<data>;Public)
It throws open the max script editor window and a message prompt saying the above text. If I press OK, the message goes away. When I close the editor the message comes back and we have a loop!
To get around it I can press OK. Then run script and go to max root > stdplugs > stdscripts > PolyTools.ms
I looked around and saw people had this error on previous versions of max and the fix was to place a copy of polytools.ms in the startup folder. I tried this and polytools.ms crashes instead on startup. To me from the error given it looks like the ribbon isn't loading a script somewhere that it should do. Placing it in the startup folder makes sense as a temporary fix but in this case it doesn't work. I can run the script after every time max has loaded but this is inconvenient and means I can't do any batch operations which I do quite often.
My PC specs are Win XP x64 SP2, Xeon W3550, 12gb ram, quaddro 3800 and dual screen monitors, I also use a Wacom tablet.
The problem happens in both x64 and x86 installations of 3ds max. We have reinstalled 3ds max countless times. My colleagues have identical computers, hardware wise, haven't had the same issues. We're using SP2 patched 3ds max 2012 too.
View 1 Replies
View Related
Feb 18, 2013
I am looking for something to convert .job files to .fbk files. I have Trimble business center and AutoCAD C3D 2013.
I haven’t got them to work together yet. I am trying to upgrade from Trimble geo office, which makes perfect field book files but it won’t work on my new computer.
Trimble says TGO is obsolete and that it just doesn’t work on new computers but I can't see why not..
View 2 Replies
View Related
Aug 8, 2013
We're moving to Trimble Access on the survey data collectors which means that we have to export design data using Trimble Link and then use Trimble Business Center to examine the data and do any editing before sending it to the field.
So far I've found that alignments, profiles and surfaces seem to transfer OK. Corridors however have been an almost total failure.
Civil 3D 2012 & 2013 & 2014
Toshiba Qosmio X505-Q890
2 x i7 - Q740 quad core CPU's
8GB of RAM
60GB SSD + 500GB HDD
NVidia GeForce GTS 360M - driver 8.17.13.0697
Win 7 Home Premium
View 2 Replies
View Related
Aug 14, 2012
Today 2013 returns "Command: _cui Unknown command "CUI". Press F1 for help." from the command line. menu and ribbon. What a mess 2013 is! Defeitely not worth the miniscule improvements.
View 5 Replies
View Related
Apr 4, 2013
Trimble Access, Civil 3d 2012 export road problem
when I export a road file to my TS2 it becomes corrupted (file size 50% of what it should be.
4 months ago there was no problem. The weird thing a is that the other worstation in the office has this issue to.
Here's what I have done to troubleshoot: swapped out both data collectorsexported this rxl file to a virtual instrument on my desktoptalked to cansel and autodesk but the said they haven't seen this problem. I can rule out the following.
trimble/autodesk software, hardware ( to much a coincidence that both work stations have this problem)Data Collectors swapped out - file size of the corrupted rxl were the same on the virtual deskto instrumentcorrupted dwg - exported a road six months ago, now re-exported and the new file is corrupted.
Both machines are identical:
Pentium Zeon
16 gb RAM
Identical software installation
View 3 Replies
View Related
Mar 14, 2012
My surveyor gave me a Trimble .tsf point cloud file....how do I convert that dude to an AutoCAD .las file?
View 2 Replies
View Related
Dec 17, 2013
We are looking to upgrade from AutoCAD 2009 to V2012 and I have a copy for testing purposes.We have several custom commands linked to menu icons for added symbols such as a gate valve, ball valve etc.
Most of these use the following command
^C^C^C^P(setq #prompt T #bname "V:/blocks/pefs/bfl")(princ);BBLOCK^P;
I've worked out that"V:/blocks/pefs/bfl is the location of the block drawing and is stored in #bname, the #prompt is set to tell the block (#bname) to break the line and insert, or, if nil instead of T, then just insert the block over the line. When I click on the icon when using AutoCAD V2012 I get
unknown command "BBLOCK"
but it works just fine in 2009. I can see no reference to BBLOCK and can only assume it is a variable of some sort. I've spent hours searching the forums to no avail.
View 9 Replies
View Related
Nov 15, 2012
I was told that I should download and install DWG compare plug-in to compare 2 dwg files. I have downloaded the file and installed it (at least I got the "successfully installed" message) but when I open AutoCAD LT 2013 it does not show up on the plug-ins tab and using the dwg compare command returns an "unknown command" response.
View 5 Replies
View Related
Apr 13, 2012
I am trying to utilize Trimble's ability to export Points to an XML file. The XML file contains some additional Attribute data. I have created the new Point UDP's and also Created a new Point File Format. Here lies the Problem, when I go to the Insert Tab in the Ribbon and pick import from XML. It gives me no choices to select a Point File Format? It just imports the file with just PNEZD data only, and not my additional Attributes.
View 7 Replies
View Related
Mar 12, 2013
We often have to create dxf files for surveyors to use in Trimble survey controllers. Usually, the linework has to be 3D polylines so that they can stake out the lines on the ground in 3D.
When compiling our design we often have to use arcs which do not function as 3D polylines. To get around this, we convert them to feature lines. This works for creating surfaces but we are unable to export these feature lines in our dxf files.
C3D 2012
Win 7 64 i5
8GB RAM Quadro FX 1800
View 4 Replies
View Related
Feb 14, 2013
I have AutoDesk 2013 install on my computer and when I use MVSETUP, "Unknown Command" show up.
View 6 Replies
View Related
Jul 6, 2012
I have been using Architecture 2013 for a while now, but now there is what I beleve to be a configuration issue. Essentially, ACAD loads,but does not recognise any AEC components. The tool pallette no longer has an icon to add a wall, for example. If I load an older drawing that has a wall in it, and select the wall, the Properties window says it is a wall, but none of the blue grips is visible. Right clicking does not give the option to "Edit Wall Style" for example. It behaves as though it does not know what an Architecural element is. If it type "WALLADD" at the command line, it says ""Unknown Command".
The company I purchased it from initially had me do a "repair", then a "reinstall" and then a "Clean reinstall". All of which I have done.
View 2 Replies
View Related
Jul 24, 2012
I'm an Autocad 2004 user and I was working in a auto cad drawing and I wanted to install a new hatch file and now I cannot get any of my short key commands, Z zoom, Line, Circle, Etc. every time that I enter a command I get a message saying Unknown command Press F1 for help.
how to get the commands files to work again.
View 2 Replies
View Related
Apr 17, 2012
I recently downloaded the trial version of Autocad Architecture 2013. I changed my main customization file to aca.cuix so that I would have the build panel. The build panel is now there, but it is not working. All the icons are questions marks and when I click on the ceiling grid icon it says 'unknown command'. How can I get the ceiling grid function to start working?
View 2 Replies
View Related
Jul 4, 2013
[URL] Basically, when I accidentally input a typo into the command line there is a massive lag before AutoCad comes back to life. Nearly three seconds.
This happens on our AutoCad 2014 LT installations too.
I have all the predictive/corrective command line features turned off.
I have also uninstalled 360 and online content services, prior to the problem, to no avail.
Our office internet is proxied, and there are no ports opened for any Autodesk products.
It's losing us valuable seconds / minutes / days / weeks / months, depending on how you look at it.
System information: Win7 x64 / 3DSMax Design 2014 SP3 / AutoCad 2014 SP1 Lenovo E30 ThinkStation Xeon E31225 Quadcore @3.10Ghz PNY GTX760 XLR8 2GB (332.21 Driver) 24Gb Ram Corsair 650w PSU
View 9 Replies
View Related
Oct 8, 2013
I have been trying to understand how to get from a ***.docx file to ***.xaml and then link that into my project.
Is it a simple matter of saving a html somehow or am I missing the boat?
View 9 Replies
View Related
Apr 9, 2013
when i try to copy drawing,''copyclip unkown command' showed up, what should i do
View 1 Replies
View Related
Apr 11, 2012
I'm using the ribbon in 2012. I've got a drawing index sheet I want to update, and what I need to do to get to the Edit Data Link command is switch to the Classic interface and select the table in order to display the Table toolbar with Edit Data Link button.
I cannot find this anywhere on the ribbon, and the same button icon as Edit Data Link on the Table toolbar runs Data Link Manager from the Annotate tab, Tables panel on the ribbon, which is not what I want.
Where is this on the ribbon? And how come identical tool buttons run different commands in different workspaces?
View 5 Replies
View Related
Sep 13, 2013
I'm running AutoCAD 2012 (base version, but part of Mechanical install). Part of my .mnl file is set to run (command "cube" "off"). On one machine (Windows 7), it works fine. I'm temporarily on my laptop (Windows 8), & that portion no longer works.
If I type cube in the command line, it works fine. However, if I type (command "cube"), it says unknown command "CUBE".
View 5 Replies
View Related
Sep 2, 2011
My company upgraded our AutoCAD from 2007 to 2009 this past Monday. I'm getting an error message when trying to change the order of objects in model space.
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
View 5 Replies
View Related
Jul 3, 2012
I used to have my ribbon and commandline next to each other but now whenever I try and put them back next to each other it always ends up with one on top or one on the bottom. I added a picture to try and explain this!
View 1 Replies
View Related
Sep 25, 2013
I am having trouble with baseview in AutoCAD 2014. It used to be that when entering the baseview command your ribbon would dynamically change to give the functions and features within the command. Seemingly in 2014 this no longer happens.I also find that after creating the view, I have inconsistent object snapping.I get endpoints on some objects, but not on others.
View 5 Replies
View Related
Jul 29, 2013
Creating a ribbon for Partial Customization files in the CUI, and I am trying to setup some buttons for existing polylines for example underground electric and overhead electric. When writing the macro what are some ideas for creating a polyline with the proper linetype for that particular object rather than changing the layer in layer properties dialogue.
View 9 Replies
View Related
Mar 19, 2013
In a drawing, the directions aren't pointing at a 90-degree angle with relation to the command ribbon above it. It's rotated a little clockwise, as are the crosshairs. How do I get the crosshairs and viewcube to be parallel with the command ribbon? I don't need to rotate any objects in the drawing, but I think this is messing up what I see in my viewports in the layouts.
View 9 Replies
View Related
