ACAD 2014
I normally turn off the Batch Plot (Save As List) feature cause I never use it, however recently I turned it on and saved my choice.
How do I turn it off again? Is there a variable for this one?
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
When I try to batch plot from Autocad 2009, using pdf 995, the save as dialog box does not open. I do not print in background, The drawings all process correctly. When it comes to the end nothing happens. I have <publishcollate> set at <1>
It worked once or twice a while back. I cannot get to the root of the problem.
The same happens with the plot to dwg standard plot on cad.
The only way I can do a successful batch plot is if I set the file location on the plot to dwg prior to print.
However, the plot to dwg does not plot our firms titleblock correctly.
Is there a way to set up batch plot so it saves the files on it's own? Right now I have to wait for the box with the name to pop up and then I hit OK and then have to wait for each file like that?
I found a setting and changed it from "Prompt for name" and changed it to "Specify Name" but that did not do the trick.
Not sure if I am supposed to specify the PDF printer in the Page Setup or the upper left of the batch plot dialog box.
Also, why is it that every time I open batch plot it loads all the current layout tabs in the drawing (which I dont care about). How do i open batch plot and specify my sheet list and not have to "replace all sheets"/
We upgraded to AutoCAD 2013 earlier this year (from 2002 - archaic!), and I've run into an odd glitch when using the batch plot utility. It seems to work fine when I'm only making one copy of a set of drawings. When I need to print more than one copy, Bathc plot does one of two things: it either plots a single complete set instead of the quantity I have entered, or it prints the correct quantity of all but the last sheet I've requested. It doesn't seem to matter how many sheets in the set, or how many copies, and I have yet to find a way to predict which outcome I'm going to get.
View 1 Replies View RelatedUsing autocad 2013 and if I choose plot and do dwg to pdf and choose the page setup I want which is landscape,Plot area limits,center plot and fit to page with monochrome pen. then my drawing turns into a pdf just fine.
I am tring to print a drawing set of electrical drawings using the batch plot and I am getting them to plot to pdf as a all drawings in a single file and all drawings as individual files but I don't see a way to set it to monochrome when using the batch plot and all my draings are plotting with the layer colors.
How can I change the batch plot to use monochrome?
I've never used batch plot before but I have a file that has multiple views set up in view manage in model space that I need to print. I've found instructions on how to do it from paper space but not model.
View 4 Replies View RelatedI have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
Been attempting to batch plot numerous dwg files to a printer via publisher. Has been successful on 2010, however experiencing difficulties in 2012.
Method used
open dwg file
set page set up to that required
save down dwg
print>Batch plot
add rest of dwg files to be plotted
remove all layouts to retain only Model Space
Highlight all dwgs
Select page set up from currently open dwg file
Publish
Result - only active dwg prints
How / which system variable to change such that the Save List As dialog box don't appear every time I click on the publish button?
View 2 Replies View RelatedAutoCAD 2011 - XP - 2 Machine office
When I use the pdf plot drivers from AutoCAD or the export to pdf option the resulting pdf is not available to the other computer trying to access it through a shared folder.
When I plot to pdf with batch plot or export the drawing to pdf and save the file in the shared folder, the other computer can not open the pdf (file not found) or attach the file to an email (you do not have permission)
Why is this? All other files share and open fine. Only pdf files from batch plot, plot to dwg to pc3, or export to pdf. This is a pain and I still have to use another plot driver (cutepdf) to get a fully useable pdf for our office.
New hard drive, had to reinstall LT 2010 (Win XP). Trying to batch plot, going through the normal prompts, little plotter icon in lower right does its thing, then the message says "errors and warnings found". When I open the "plot and publish details", there are no errors or warnings, and the plot file i just attempted does not show up at all. Tried different variations, none work.
The first couple of times i tried it, it seemed there was a problem with the default path for the output file, in the publish options window, as if it could not see the server, but then i would browse, point to the exact same server folder, and it accepted it. Also tried to save the output folder on my c: drive, but still no file. I will need to make this plot file by tomorrow for the client, or i will have to send them 40 individual pdf's.
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
I cannot remember what the trick is.....i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
I find the setting for batch plot not very user friendly at all....
I am trying to plot over 100 drawings to PDF. They are mechanical drawings and the details need to be clear. I tried a batch plot, but when printed in 11x17, everything is a bit fuzzy on the PDF. I tried a PDF convertor, and it was very clear, but it put a large, "Free Trail" logo in the center, ha.
View 7 Replies View RelatedI'm tring to plot 26 or so sheets into a single pdf or multiple pdfs and I get this error every time with no file being created.
Job: - Canceled
Job ID: 1
Sheet set name:
Date and time started: 5/3/2011 11:48:29 AM
Date and time completed: 5/3/2011 11:48:33 AM
UserID: RGDC99
Profile ID: AutoCAD MEP (US Imperial)
Total sheets: 2
Sheets plotted: 1
Number of errors: 1
Number of warnings: 0
[IMG]res://C:Program FilesAutoCAD MEP 2010AcPltRes.dll/ALERT.GIF[/IMG]Sheet: P-AIR-# FAB-AIR-1 - Plotted with Error(s)
File: Z:\_xxxxx\_xxxxx2011 ProjectsxxxxxCADP-AIR-# FAB.dwg
Category name:
Page setup: pdf
Device name: DWG To PDF.pc3 - plotted to file
Plot file path: Z:\_xxxxxx\_xxxxxx2011 ProjectsxxxxxxPDF'sOUTBOUNDxxxP-AIR-# FAB.pdf
Paper size: ANSI full bleed A (11.00 x 8.50 Inches)
ERROR: Internal Error: Null Pointer
[IMG]res://C:Program FilesAutoCAD MEP 2010AcPltRes.dll/ERROR.GIF[/IMG]Sheet: P-AIR-# FAB-AIR-1 - Error(s) Did Not Plot
File: Z:\_xxxxx\_xxxx2011 ProjectsxxxxxxxCADP-AIR-# FAB.dwg
Category name:
Page setup: pdf
Device name: DWG To PDF.pc3 - plotted to file
Plot file path: Z:\_xxxxxx\_xxxxx2011 ProjectsxxxxxxPDF'sOUTBOUNDxxxxP-AIR-# FAB.pdf
Paper size: ANSI full bleed A (11.00 x 8.50 Inches)
So when I batch plot I get the name of the drawing file followed by a dash then the tab name. For instance the drawing file is: MSA-01 Plans.dwg and the tab is W-101, when I batch plot I get [MSA-01 Plans - W-101.pdf].
We never had duplicated sheets so I was curious to save the time of me cleaning up the file names everytime, if I could batchplot with just the tab name.
Is there a limit to how many drawing files one can send when using the publish command? Using ACAD 2010.
View 1 Replies View Relatedhow I can do a batch plot to PDF whilst appending some element to the end of the filename?
Using AutoCAD 2011's batch plot, or TrueView 2014's batch plot the default PDF filename when plotting to PDF appears to be:
<file_name>-<layout_name>.pdf
Which is okay. But I want to append to that the revision of the layout (C1, C2, etc.) which I currently store in a title block as a block attribute value. Any method for somehow pulling this out and including it after the filename such that I could end up with:
<file_name>-<layout_name>-<revision>.pdf
We're currently trying to transition to using the Sheet Set Manager, is the above any easier to achieve using that?
AutoCAD MEP 2010
I've used batch plot to make pdf copies of my drawings in version 2004 and did not have this issue:
In 2010 when I use batch plot to pdf (say for 5 drawings), it produces one single pdf file with 5 sheets. I want an individual pdf file for each drawing (5 pdfs).
I don't want to have to open each drawing and plot. That's what batch plot is for!
Tying to Batch Plot to a PDF file and make the lines and text show Black not in colors. How to force colors to Black while Batch plotting to a PDF?
View 3 Replies View RelatedNever had this issue before. Just started a new big job and 8 files out of the 25 are also printing the model space when doing the Batch Plot. In the past it has only ever printed the Layout Page. And why some are printing the Model Space and the Layout is beyond me.
View 2 Replies View RelatedI need to change many drawings from our old Plot Style to a new version.
I was going to use a script to also purge and complete a few other house cleaning items...
what is the best way to change the plot table from old.ctb to new.ctb (they are not named that BTW.)
Civil 2013
I have a list of drawings which i want to batch plot using dwg to png plotter. I want the page setup file to use sun high res, plot scale fit to paper, plot area extents, plot offset center the plot for the model space
When in batch plot, the page setup shows default, however this is not my pagesetup settings as it shows default none, how do i make it see the page setup i want?
My office currently has a unique keynote database for each project. When I open a file with a sheet keynote legend, AutoCAD 2010 opens up the correct database and everything is fine. This is also true when I try to plot a sheet file. However, when I plot through the batch-plot process, AutoCAD does not open the correct database.
View 1 Replies View RelatedI have run the DWG Compare Plug-in on two DWG files. The results show the plan in grey while the differences in plans are showin in color. If I plot an individual layout to PDF the plot looks perfect meaning the plan is grey and the differences are color.
When I batch plot, all of the layouts lose their ability to plot the results of the DWG Compare and just print like the original DWG file whether it be mono or color. is there an entirely different way to go about batch printing to a combined PDF the results of a DWG Compare?
When I'm batch plotting several drawings, I'm trying to add a block from a page setup to each print.
View 4 Replies View RelatedI'd like to batch plot 50 drawings, all of which have the same title block in the same position. This is easy with the PUBLISH command, but I'd like to be able to add a "stamp" of the customer logo to these drawings, which I have as a block in a separate file. Basically I want to easily be able to plot the same drawings for different customers, the only difference being the customer logo. Is this possible?
View 1 Replies View RelatedI'm using LT2010, my layer list in LT is alphabetical but when I create a pdf- the pdf layer list is not alphabetical. Is there a way to correct his so that the PDF layer list is also alphabetical?
View 9 Replies View RelatedI have all of our .pc3 files on a server, and have created them in the order I would like to see them, however they come in a random order. I have moved them out of the folder, and back in the order I want with no luck. I tried renaming them with numbers in front, and then with letters in front to try and populate the list in a certain order. I only have 16 .pc3 files and MAXSORT is default at 6000.
We are using page setups as well which are not a problem, but the occasional time we need to print to a specific .pc3 file gets annoying having to sort through the list to find the one we want.
not sure if it a stamp plot item but I am trying to list all the x-references that are associated with a particular drawing on the plot sheet?
View 5 Replies View Related