How can i disable the automatic move command? when i choose the move command it automatically moves whatever element that's selected, using the previous dimension used to move something. Big Problem.
View 8 RepliesI use the following code to assign a reactor to an object:
(setq marReactor (vlr-object-reactor (list (vlax-ename->vla-object oggmar)) "TEST" '( (:vlr-erased . reactor_upd) (:vlr-modified . reactor_upd) ) ))
"reactor_upd" is the name of the function that starts every change or delete the object.
I would like to exclude the command "MOVE", ie if I move the object, I do not want that part to the"reactor_upd" function.
I often need to work on big drawings having utility networks, topographic surveys and properties. Whenever using FIND command in such a drawing AutoCAD regens the drawing. This happens even if FIND command is cancelled and takes 2 to 3 seconds everytime. Can I disable this automatic regen and do only when I need.
View 3 Replies View RelatedYou basically have to click "Expand canvas" every single time you paste a screenshot larger than the canvas. Sure, open a canvas that size, etc etc, but I'm looking for a permanent solution which would allow you to use the "Expand" choice AUTOMATICALLY, by default, without a popup. On that note, here's another annoying thing. Whenever I open images, crop out something, open a new one, paste it there, save it, etc, I usually have tons of unsaved images which I no longer need. I just want to exit the whole thing altogether without any save popups, etc. Like you would do in MSPaint. Open a canvas, paste in something, save it or don't, exit, the program closes nice and fine. My problem is:
This. I don't want to save every single image separately, because I no longer need them. Neither do I want to manually click each and every single one and tell it not to save, nor do I want to click "Don't Save" every time I exit. This may seem like pointless bitching, but trust me, it really gets on your nerves when you're using the program literally hundreds of times per day.
So, is there any way to disable these popups and define an "automatic" feature, to simply close and enlarge under any circumstances?
I just got a Nikon D800E and on my first day of shooting I noticed a hot pixel spot in my images in Bridge. The when I opened the files in ACR, the hot pixel spot was gone. Apparently this is a "feature" of ACR: it automatically replaces hot pixels with RGB values from neighboring pixels. (So those of you who think you have no hot pixels, think again - you might be shielded from the truth! I find this fact very disconcerting, but that's a separate issue...).
The problem is that I can't tell how many hot pixels there are. Based on the image in Bridge, it would have to be spot of 20 - 30 pixels (maybe even more). That's unacceptable to me, especially on a $3300 camera. Sure, maybe a few hot pixels spread around the image, but 20-30 bunched in that one spot, that's unacceptable.
However, I can't figure out how to disable the automatic hot pixel correction in ACR, so I don't know if the issue really is 20 - 30 hot pixels or if Bridge is just doing some type of sub-sampling that makes the problem look a lot worse than it is. Furthermore, this concerns me greatly because I've been using a D200 for many years and have never seen a single hot pixel issue. So that says to me that the sensor on my D800E has a bigger hot pixel issue than it should (I realize all sensors have some hot/dead pixels).
How to go about figuring this out? The simplest solution is to disable the automatic hot pixel correction in ACR, but I can't figure out how to do that. I'm guessing it's not possible.
I have gone around and around with Photoshop/Creative Cloud getting my activation working. After more than two weeks that problem is finally solved. BUT during this time I got a popup during the launch of Photoshop CS6 asking if I wanted to 'automatically send information to Adobe for product improvement' or something like that.
If I clicked "No" the top menu bar would appear, but every single option was greyed out. The program just sat there, useless. So, out of desperation (to continue my troubleshooting) I clicked "Yes". The program worked. How can I turn this off?
How do I disable automatic mark face in Elements 12
View 1 Replies View RelatedI have an Olympus OMD EM5 and I notice that when RAW files are imported into Lightroom, an automatic correction is applied by default. It appears to read this directly from the metadata of the RAW file. How to disable this?
The issue is that this correction means that the RAW files in Lightroom differ from both the camera viewfinder and JPG output in terms of composition - sometimes barely so, and sometimes significantly depending on angle, zoom etc. This is undesirable behavior in a lot of instances where you want the RAW to match your chosen composition.
MY AI is freezing, not allowing me to move or adjust, rotates without command. Just not listening . Sometime it will move other times cursor not responding.
View 11 Replies View RelatedIs there a way to return the work area bar to automatic after you move it manually? I know about the alt-click to expand to teh entire work area but that is not returng it to the auto mode.
View 5 Replies View RelatedIf there any lisp for the below sequence:-
1) select a few group of pre-set block name
2) change all these pre-set bloack name to a layer " Eye Bolt"
At moment, i have several kind of block such as example of "EB10", "TEB10","EB8","TEB8" and etc.
When I create a rectangular box in Autodesk Inventor 2008, shell it, and create a new sketch on any face and press E I expect to be greeted with the extrusion options. This does not happen, and a command alias input dialog appears in the status bar.
I really want to turn this off, since it has happened on other occasions as well. Since there's no other way to get to the extrusion feature, it completely halts my work.
Usually when I don't know what a feature is for and I'm not attempting to use it I expect to not see it- especially when I perform actions that don't usually bring it up. I'm not sure why the behavior has been put there. Hopefully it's not put into later versions (I've seen 2010 complaints as well) so someday an upgrade will remove the annoyance.
I don't need or want the drag and drop (DROPGEOM) command. I never use it because it is much slower than simply using the move command or grips. But some times when I am going faster than the computer I accidentally do it and then have to wait while it moves the object and then wait while I use undo to move it back. It can take a really long time if I accidentally move a large xref. So is there some way to turn off drag and drop of autocad entities?
View 9 Replies View RelatedWhat happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
View 2 Replies View RelatedI just got AUTOCAD 2013 and I have problem using MOVE command. With my previous version AUTOCAD I was able to move one by one every line from the object I created. Now with the new version when I use MOVE command, not only one line is moved, it is moved the whole object (Like the object is a block, but is not).
How can I move only one single object from my drawing?
i have always used spacebar+command/alt to zoom in/out but now suddenly its not working..! command+spacebar now toggles the MOVE tool...!? spacebar+alt is still zoom out, and i noticed that the right command+spacebar is still fine but i just cant get used to using it i have always used the left command+spacebar....
View 5 Replies View RelatedHaving never used this command before I am struggling as to where it is located.I imported a U-Bolt in Solidworks format and I am just trying to move the nuts as indicated.
View 5 Replies View RelatedWhenever I use the move command on a line or series of lines that are touching other lines, the lines that aren't part of my selection move with that one line. cad-movecommand.jpg Here's a series of screenshots showing what I mean. I can't move just that line without moving the other lines around it.
View 3 Replies View Relatedget any further with VB.net I'm trying to (re)create some autocad commands (and a own features, eventually).
I'm trying a move command now.A recreation of the Autocad command.
The selection of object works. Moving the set between two points works. The only thing thats too advanced for me is the drag posibility VB offers.
Currently using civils 3D. MY command line/toolbar has for some unknown reason shrunk to 2 inches in length.
When I try to resize it, there is no way to reposition it, resize it, or alter it in any way.
Before I upgraded to AutoCAD 2014 (was using 2012) when I used the MOVE command on 3D geometry (while using the Realistic Visualization) I could see one object move into another. Like, moving a cylinder into a box to represent a button, and I would see it slowly sink into the box as I moved it further and further along.
In 2014, the object I am moving will REMAIN ON TOP visually of all other geometry until it is completely inside the other geometry (at which point it disappears completely). It's hard for me to then judge just how much of it is sticking out during the MOVE command. Once I complete the move command, the proper visualization order is then shown.
In other words, if I have a 10 inch cylinder, and I'm trying to move it into a box so only 2 inches sticks out (as a visual guesstimation), currently I would see ALL 10 inches of the cylinder whether part of it is inside the box or not, until I complete the MOVE command.
trying to move a picture and I get "could not complete the Move command because the result would be too big". It is the only layer.
View 2 Replies View RelatedIn InDesign if i move my folder with images just by re-linking one image of the folder ALL will be linke at once by their names. In Illustrator i have to re-link manually one by one. Am i doing something wrong? Should i have some command selected? Can i do it through a plugin?
View 1 Replies View RelatedWhen I use the move command to, let's say, to move a floor plan (drag to new location on the page), some of the lines in the "moved" floor plan are either skewed or missing. I'm able to "cut and paste" as welll as "copy with basepoint" w/out problem.
See attachment below.
How might I correct this problem?
HOW DO YOU TURN THIS OFF????!!!!!!!
If you select an object and then drag it, it moves. This is without initiating the MOVE command and without picking any grips.
I am using Photoshop Elements 9 and the "move" tool is not working. The Auto select layer box is checked and I have rebooted the computer and reset the move tool. I keep getting the error message "Could not complete the Move command because of a program error."
View 8 Replies View RelatedI use Illustrator CC.I have made a custom Image Tracing Preset and want to use it on a folder containing a sequence of pictures I want all to vectorize automatically. Programming an Action isn't an option as the Action recorder doesn't record which tracing preset is used for image tracing. I found I can use the pre-installed Image Tracing Script [URL] in which I only need to specify the correct number of the Image Tracing Preset. And that became a big problem.
View 2 Replies View RelatedI'm trying Illustrator CC. In old versions, the last objects drawn with brush or pencil was selected automatically, now we need to manually select the object for modify it. Is there a way to activate the automatic selection of the last object drawn?
View 1 Replies View RelatedNot sure as to why this is happening, but like the title says anytime I use move or grab a grip point my osmode automatically changes itself to settings that I do not want. I can change my osnap settings while in the command to set them back to what I had originally had but this is very tedious and I have not experienced this with previous versions of acad.
From all my searching, the only thing I can come up with is; it is a setting within the acad1014doc.lsp but I am not sure.
Civil 3D 2013/ When I try to move or un-dock the command line window, a red circle with a line through it appears.
When I switch work spaces still the same result.
I am new to AutoCad 2013 from 2000. When I try to move my command line, because it's in the way, I get a fatal exception error.
View 6 Replies View Related