times to times i have this error in autocad 2011.
Fatal Error: Unhandled e06d7363h Exception at 751d9617h
i use an: Intel i5 Intel with 8GB memory, running on windows 7 Pro 32bits.
I get this because i am unable to recover a dwg and acad closes
View 3 Replies View RelatedI've recently installed AutoCad 2010 and I recieve this error when trying to save an existing drawing using the save as dialog. It has no problem saving as long as I do not change the name but when I attempt to rename the drawing it gives me an error. FATAL ERROR: Unhandled e06d7363h Exception at 7c812afbh
View 9 Replies View Relatedwhen I open the Autocad 2011, FATAL ERROR: Unhandled e06d7363h Exception at 7c81eb33h is showing on the screen and Autocad is not opening.
My configuration is below:
Disk Drive: Samsung GD080HJ 80 Gb.
Mother Board: Intel(R) 82945G Express Chipset Family.
Processor: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz
Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz
Ram: Kingston 4Gb.
The computer is brand new, a dell work station T1650. Running 2010 CAD program crashing randomly and over 100 times for this past week. Any clue based on the error code?
Fatal Error: Unhandled e06d7363h Exception at fd059e5dh
When I open my particular file and begin working AutoCad crashes. Then posts this " fatal error: unhandled e06d7363h Exception at fe07cacdh" then does "Autocad cannot continue. You can attempt to save changes into the following file up to the start of the last command: ....."
View 1 Replies View RelatedWhen using AutoCAD Architecture 2014, I get this error intermittently when launching AutoCAD Architecture 2014. I have submitted numerous error reports, and have done research into getting this error taken care of, but nothing that I have tried has worked.
View 9 Replies View RelatedI am trying to imnport a DGN file into cad, but I get this error
"FATAL ERROR: Unhandled c0000417h Exception at 6d5b52d4h"
How can I fix this?
After opening AutoCAD 2012 crashes with error message " FATAL ERROR: Unhandled e0434352h exception at fd6bcacdh".
View 1 Replies View RelatedI cannot open up AutoCAD this morning; very quickly upon start up it stops and gives me a fatal error with the following message:
Unhandled e0434f4dh Exception at fd97cacdh.
I don't have the ability to repair/reinstall autocad myself.
I receive this error in AutoCAD 2013 as soon as I try to save a current drawing and also in some of the commands.
View 3 Replies View RelatedUpgrading an old machine that is setup to run scheduled tasks that open autocad and run autolisp programs periodically through out the day. It's our little robot that runs by itself in a back room. This machine had AutoCAD R14 on it and has been running fine for years. With the new machine we upgraded to AutoCad 2012, which has unfortunately created some problems. The major one being a fatal error that we can't seem to fix.
The Problem - One of the Autolisp programs is a fairly simple routine that reads a dat file containing pertinent information, it steps through this dat file one line at a time and draws a shape, saves it, erases, draws the next one, and so on. There's typically ~150 items it draws. But it's never making it through. It will create about 90 drawings and then the Fatal Error appears, crashing AutoCAD every time.
What I've tried - Searched for this error and found one thread about possibly corrupt .NET, so we've tried reinstalling .Net Framework (twice) and it had no effect. There was also mention of a possible graphics card/driver issue and to try running with no hardware acceleration. This did nothing which was of no suprise since I'm only receiving this error during this specific scenario, acad runs fine otherwise.
Windows XP, Acad2012, it's running under a classic workspace in single drawing mode.
We are currently putting the old machine back to work until we can find a fix. If you have any questions about the set up or anything, ask away.
i am getting a fatal error message when i try to open a file, any file. the message is unhandled c0000417h exception at 71a252c0h
View 1 Replies View RelatedAny time I want to open new file comes this mesage.
Unhandled e06d7363h Exception at 74bab9bch
There are specific files in which will cause this fatal error to come up:
"FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at 5c88cd29h"
I am using AutoCAD 2010. I am able to open the file in other computers in the office, even in another AutoCAD 2010, but it consistently gives me this error on my machine. I've tried purging the file and recovering it, but nothing seems to work.
attachment file i recive fatal error and it will automatic close my autocad lt.t
View 1 Replies View Relatedtoday i had the third crash of Acad 2013 since i have installed it on my pc (I7-2600k 64 bit, 16g ram 250gb ssd /2gb hard drive, nvidia quadro 4000 graphics card) and whenever i try a and start Acad it comes up with "fatal error unhandled exception etc etc) after searching the web all i could do was reset to autocad defaults from the start menu but in turn i lost all my settings menus etc. is it my PC or software?
View 5 Replies View Relatedi've a trouble with Map 3d 2012.
After installing Map 3d, i can not run the program.
also you can find a screenshot about the problem.
I am getting the above error message everytime that I close down AutoCad 2012 LT. Why this is happening and how to rectify it.
Windows 7
AutoCAD 2012 LT
My client facing this fatal error when i open my AutoCAD LT 2010 "fatal error: Unhandled e0434f4dh Exception at 7c812afbh" Even i do clean uninstall & reinstall back the software.
Is there anyway to resolve or recover this error? Because base on my previous experience it is difficult to solve the problem when the application shown "fatal error" .
I have just recently started to have a problem when opening files with xref'd aerials it gives the error:
FATAL ERROR: Unhandled c0000409h: Exception at dcf51030h
and closes the program.
Running:
Windows 7
AutoCAD 2013 LT
I7 720QM processor
4 gigs of ram
NVidia Geoforce GTS 360M 1 gb
I have AutoCad Map 3d 2010 loaded on a computer and whenever I open ACAD, I get the Fata Error listed above. I have uninstalled reinstalled and still the same thing.
View 3 Replies View RelatedI turned the computer off on 6/16/2012 for a business trip and on 6/22/2012 when I started the computer back up I had this error.
View 1 Replies View RelatedWindows 7 64bit running Civil 3D 2013 with service pack 2 installed.
The system runs fine while on the network, but once the user takes it off the network and home or basically off the network it comes up with a FATAL ERROR when the program is started up.
Error is:
Could not load file or assembly MapPublishlmp.dll or one of its dependencies. The network path was not found.
I can ignore the error screen and "work" in C3D fine; just as long as i don't hit the <Continue> button or "X" in upper right hand corner. If either is selected the program bombs out and generates error report.
Have tried to create a shortcut with new profile, but it did NOT work either.
Like i mentioned - systems works find on network but once it is not connected to the network some issue is happening with the dll file for the mappublishlmp.dll
What ever the hell that is...Not doing ANY GIS work with system. NEVER published ANY drawings where this would have come into the mix.
We have a computer here that won't open drawings. This is the error he gets: FATAL ERROR: Unhandled e0434352h Exception at fcc8940dh. If anybody else tries to open these drawings they open fine. We have tried to open it with Civil 3d 2013 and 2014 but it happens with both programs. We have tried to recover and run audits but it still has problems.
View 1 Replies View RelatedEvery time I try to open my baloon notification settings AutoCAd 2013 Architecture crashes and gives me this error: Fatal Error: Unhandled e0434352h Exception at fd51940dh. I find this particularly odd because I changed my settings once on this machine not too long ago but it's not working now. I'm going to:
-Options
---System tab
-----InfoCenter section
-------Baloon Notifications
System Specs:
Dell Precision T3600
Windos 7 64-bit
Intel(R) Xeon(R) CPU E5-1607 0 @ 3.00GHz
16.0 GB RAM
AMD FirePro V4900 (FireGL V) Graphics Adapter (8923 MB)
We got the FATAL ERROR: Unhandled c000417h Exception at 6cbf0468h after opening some drawings..
it is an win7 Professional x64 sp1 workstation.
We have a 32-bit machine that continues to receive the above mentioned error message. This seems to happen unexpectedly and closes AutoCAD with no warning. It has been happening with more frequency lately. What causes this error and what steps may be taken to remedy it?
View 7 Replies View RelatedCAD crashes and I am getting the above error while trying to edit an existing corridor. I am trying to add two different regions in an existing corridor. I accomplished this task yesterday, but due to design contraints have had to add two more regions. The two assemblies that I am using are already included in the corridor, so I know it shouldn't have anything to do with the assembly.
AutoCAD 2010 C3D
User say that when open a DXF, they receieve the error
AutoCad Error Aborting
FATAL ERROR: Unhandled e0434352h Exception at fd91ac3dh
System
Dell T3500
Windows 7 x64
8gb of DDR3
2GB nVidia Quadro 4000
I have just installed Autocad LT 2013 (licence bought yesterday) on a new Lenovo E330 laptop and the first time I'm trying to run Autocad I'm getting the following error: "fatal error: unhandled Access violation writing 0x0000 exception at 0h".
[URL]
1. regediting the DWORD Low to all 0000000, but it goes back to whetever value it was (i have tried with changing value and restarting, not restarting... etc. numerous combinations) and the error is still there
2. On one ocasion an autodesk employees on that thread informed the user that the generated error report was pointing towards a usb display adapter, and as I was using an external replicator (USB) I decided to try with the laptop running by itself on it's own graphics, that didn't change the error message. Next step update the HD4000 driver to the latest from intel, but still the same fatal error.
On top of the above i have also completly unistalled Autocad and all related products, performed new installation with same fatal error again after the installation. I have tried different comatibility modes when running the software and i have tried running as administrator (although I am logged as administrator anyway)
