AutoCAD 2013 :: Unhandled Exception 80000003
Apr 11, 2013I have an Unhandled exception 80000003 whenever I open Autocad.
View 2 RepliesI have an Unhandled exception 80000003 whenever I open Autocad.
View 2 RepliesI have been using AutoCAD 2013 for 2 days now, and already the new version seams so unstable! lots of errors every where!
sometimes the file gets stuck, and while you draw the file looks empty, yet when you restart autocad, you see everything you didnt see drawn.
yet this doesnt appear all the time, but the error I will be discussing does:
Try enter CUI and set the Quickcalculator pallet to appear on the right or left side of the screen. Close the CUI, and everything is going fine, and the pallet appears normal. Yet close Autocad and start it again, and an error will appear on start it says this:
"Unhandled exception has occurred in a component in your application. If you click Continue, the application will ignore this error and attempt to continue. Width and Height must be non-negative."
and the Quickcalculator pallet will appear floating in the middle.
I tried everything, but no use. The same error over and over again. This didnt happen in older versions and no big changes happned to the CUI interface, which makes me conclude its a bug.
I have a massage of "Unhandled c000001dh Exception at 776a50d0h" when I want to add any text field to a drawing.
I had an AutoCAD 2014 but I did reinstall it to 2013 and there is no change.
There is no answer for bug report as well.
today i had the third crash of Acad 2013 since i have installed it on my pc (I7-2600k 64 bit, 16g ram 250gb ssd /2gb hard drive, nvidia quadro 4000 graphics card) and whenever i try a and start Acad it comes up with "fatal error unhandled exception etc etc) after searching the web all i could do was reset to autocad defaults from the start menu but in turn i lost all my settings menus etc. is it my PC or software?
View 5 Replies View RelatedI am a tech at a University and am working the new deployment image for our Architecture Design lab. I just installed AutoCAD 2013 and I get this error when opening Civil 3D.
Message Box
Title: Execption in c:program filesautodesksutocad civil 3d 2013aeccuipressurepip...
Body: Unhandled Exception C06d7E (Delayload "Fdo.dll" Module Not Found) at address FD90CACdh
I have tried reinstalling and copying fdo.dll and aeccuipressurepipes.arx from the install files to installed location and still get this error.
System specs: Dell Precision T3500
Operating System: MS Windows 7 Professional 64-bit SP1
CPU: Intel Xeon W3530 @ 2.80GHz
RAM: 6.00 GB Triple-Channel DDR3
Graphics: ATI FirePro V7800 (FireGL) (Dell)
I have 5 AutoCAD 2013 users that receive Unhandled Exception 2 errors when closing AutoCAD files. All users are on Windows 7 64-bit machines, but amount of RAM varies. Three machines have 4GB of RAM, one has 8GB and one has 12GB. AutoCAD is 2013, SP1.1 64-bit. All machines are Dells either Optiplex 980 with Nvidia GEForce GT330 card or Optiples 990 with AMD Radeon HD 660Series video card.
We have updated the video drivers on both machine types to the latest version. The users state that the errors occur on newly created files as well as files that they share between themselves, but only occurs when closing files. AutoCAD opens with out errors.
I've attached a Word document with the series of errors that are created when closing a drawing.
I just installed an educational version of Autocad 2014 for school and am encountering some major problems. The program works fine at first, but after I close it and reopen the application it starts to bug out. If I try to ask my layers after I reopen the program, Unhandled exception has occurred in a component in your application.
If I close the program and try to reopen, the opening screen gives me the same error message. I've installed and reinstalled the programs multiple times over the server, but still no difference.
When I open my particular file and begin working AutoCad crashes. Then posts this " fatal error: unhandled e06d7363h Exception at fe07cacdh" then does "Autocad cannot continue. You can attempt to save changes into the following file up to the start of the last command: ....."
View 1 Replies View RelatedEvery time I try to open my baloon notification settings AutoCAd 2013 Architecture crashes and gives me this error: Fatal Error: Unhandled e0434352h Exception at fd51940dh. I find this particularly odd because I changed my settings once on this machine not too long ago but it's not working now. I'm going to:
-Options
---System tab
-----InfoCenter section
-------Baloon Notifications
System Specs:
Dell Precision T3600
Windos 7 64-bit
Intel(R) Xeon(R) CPU E5-1607 0 @ 3.00GHz
16.0 GB RAM
AMD FirePro V4900 (FireGL V) Graphics Adapter (8923 MB)
We got the FATAL ERROR: Unhandled c000417h Exception at 6cbf0468h after opening some drawings..
it is an win7 Professional x64 sp1 workstation.
User say that when open a DXF, they receieve the error
AutoCad Error Aborting
FATAL ERROR: Unhandled e0434352h Exception at fd91ac3dh
System
Dell T3500
Windows 7 x64
8gb of DDR3
2GB nVidia Quadro 4000
I Have an Error (( autocad 2013 fatal error unhandled access violation writing 0x0000 exception at 0h ))
View 1 Replies View RelatedIt occurs when a user tries to run AutoCAD 2013.
And returns the error
"Unhandled Exception E0434352 at address FE0DCACDh"
We're running Autodesk Product Design Suite Premium 2013 on computers specficially designed by chaps so they meet the required spec (Windows 7).For two months we have been running this product without any problem however over the weekend we moved offices and the computers have been "poked about" by the IT support team as they moved servers / changed admin rights / drank coffee. This problem however is only affecting the one computer - the other is running fine so I assume they've not broken anything.
It ran on Tuesday til Thursday without any problems however this morning AutoCAD is having an abortion hissy fit (fifth crash in two hours) and I am getting:
"Fatal Error: unhandled access violation 0xffffffff exception at e47fde0ah" crashing the system while moving lines on a very simple AutoCAD 2D drawing (500kb). This
I've turned Aero Theme off and am running no other computer programmes (CPU sits at 13% when it crashes and doesn't spike).
Every time I run AutoCAD 2014, I get this message:
Fatal Error: Unhandled Access Violation Writing 0x006c Exception At a5d45122h
It then shuts the program down, and asks if I want to send an error report to Autodesk, which I have done.
I'm running Windows 8 Pro.
I recently installed AutoCAD 2013 onto my computer which has windows 7 64 bit operating system. After completing installation, I tried to open AutoCAD and immediately I recieved this error, "Fatal error: Unhandled Access violation Reading 0xffffffff Exception at 70cbe8e1h.
View 9 Replies View RelatedI have continuously been receiving Fatal Error codes following with my AutoCAD to crash by just saving my drawing.
FATAL ERROR: Unhandled Access Violation Reading 0x53fefc14 Exception at ed091e2bh.
FATAL ERROR: Unhandled Access Violation Reading 0x9ffd3a31 Exception at f797dcf9h.
Also, i having Runtime Error. R6025 - Pure Virtual function call.
I have repaired, uninstalled and reinstalled AutoCAD. I use Windows 7 64 bit. Everything is up to date.
I have a CAD user when they try to print they get a Fatal Error
"FATAL ERROR: Unhandled Access Violation Writing 0x0034 Exception at 6ce5a6b4h"
What does that mean?
If you key in CUI, and change the "Command List" to "All Commands and Controls", an Unhandled Exception is generated.
See attached.
I am experiencing the error mentioned in the subject regularly. After a random number of times (occasionally the first time, mostly it requires several attempts), a click on the open icon in a toolbar, or an attempt to open a file from the file menu, will result in the program immediately crashing.
I've tried searching via Google, and within these forums, and haven't found an exact match for the message I'm getting. I've seen that e06d7363 can be thrown due to incompatible .dll files within the Microsoft Visual C++ Redistributable package, but those sites indicated a location other than 75fab9bc. Some sites mentioned the file history being a problem, so I've disabled that within AutoCAD. Still no luck. I then deleted the associated history registry key, and the problem still continues. I restored the reg key, and...here I am, posting to the forum.
I am using AutoCAD 2007 LT with Windows 7 Enterprise, 64 bit, on a HP i7 laptop with 8 GB of memory (not sure of the exact model, it's a work computer). The Microsoft Visual C++ x64 Redistributable version on my machine is 10.0.30319.
Any time I want to open new file comes this mesage.
Unhandled e06d7363h Exception at 74bab9bch
I'm working on some iLogic code but it gives me an error
The strange thing is that the error apperase when i use the code as an External Rule.
When i copy the code to a Rule (local rule) the error does not appear.
In both rules the code works correct, but i like to use it as an External Rule, without the error.
I have made a User Parameter: "Keuze" that hase a Multivalue.
Dim oPartDoc as PartDocument = ThisDoc.DocumentDim userParams As UserParameters = oPartDoc.ComponentDefinition.Parameters.UserParametersTry Keuze_Params = oPartDoc.ComponentDefinition.Parameters("Keuze")Catch Dim newParam As UserParameter = userParams.AddByValue("Keuze", "", UnitsTypeEnum.kTextUnits)End TryMultiValue.List("Keuze") = GoExcel.CellValues("C: empiLogic.xlsx", "Sheet1", "A2", "A6")Keuze= InputListBox("Huidige keuze: "& iProperties.Value("Project", "Description"), MultiValue.List("Keuze"), Keuze, Title := "Keuzelijst:", ListName := "Type keuze")If Keuze = Nothing Then Exit Sub LineNumber=GoExcel.FindRow("C: empiLogic.xlsx", "Sheet1", "Naam", "=", Keuze)iProperties.Value("Project", "Description") = GoExcel.CurrentRowValue("Code")
I have a problem with my Inventor crashing everytime i try to set a .iam view in my blueprint to hidden lines. First i tried to make a specific part of the .iam hidden lines and it crashed, then i tried to make the hole view hidden and it still crashes.
"unhandled exception"Autodesk Inventor Professional 2011
i've a trouble with Map 3d 2012.
After installing Map 3d, i can not run the program.
also you can find a screenshot about the problem.
I am getting the above error message everytime that I close down AutoCad 2012 LT. Why this is happening and how to rectify it.
Windows 7
AutoCAD 2012 LT
My client facing this fatal error when i open my AutoCAD LT 2010 "fatal error: Unhandled e0434f4dh Exception at 7c812afbh" Even i do clean uninstall & reinstall back the software.
Is there anyway to resolve or recover this error? Because base on my previous experience it is difficult to solve the problem when the application shown "fatal error" .
I have just recently started to have a problem when opening files with xref'd aerials it gives the error:
FATAL ERROR: Unhandled c0000409h: Exception at dcf51030h
and closes the program.
Running:
Windows 7
AutoCAD 2013 LT
I7 720QM processor
4 gigs of ram
NVidia Geoforce GTS 360M 1 gb
I have AutoCad Map 3d 2010 loaded on a computer and whenever I open ACAD, I get the Fata Error listed above. I have uninstalled reinstalled and still the same thing.
View 3 Replies View RelatedI turned the computer off on 6/16/2012 for a business trip and on 6/22/2012 when I started the computer back up I had this error.
View 1 Replies View RelatedWindows 7 64bit running Civil 3D 2013 with service pack 2 installed.
The system runs fine while on the network, but once the user takes it off the network and home or basically off the network it comes up with a FATAL ERROR when the program is started up.
Error is:
Could not load file or assembly MapPublishlmp.dll or one of its dependencies. The network path was not found.
I can ignore the error screen and "work" in C3D fine; just as long as i don't hit the <Continue> button or "X" in upper right hand corner. If either is selected the program bombs out and generates error report.
Have tried to create a shortcut with new profile, but it did NOT work either.
Like i mentioned - systems works find on network but once it is not connected to the network some issue is happening with the dll file for the mappublishlmp.dll
What ever the hell that is...Not doing ANY GIS work with system. NEVER published ANY drawings where this would have come into the mix.
We have a computer here that won't open drawings. This is the error he gets: FATAL ERROR: Unhandled e0434352h Exception at fcc8940dh. If anybody else tries to open these drawings they open fine. We have tried to open it with Civil 3d 2013 and 2014 but it happens with both programs. We have tried to recover and run audits but it still has problems.
View 1 Replies View Related