AutoCAD Inventor :: Autodesk 2011 Crashes When Converting 3D Model - Drawing
Nov 1, 2011
Autodesk Inventor Professional 2011 will crash when we try open a 3D model (Inventor Component) as a Baseline View for a new "Drawing" file.
To replicate the error, we draw a simple Circle and extrude it so it is then a 3D Model. We then create a new "Drawing" file, click the Baseline View button at the top left, and then select the 3D Model Inventor file (the extruded circle). The program crashes and we get the following error from Autodesk Software, NOT Windows.
dumpdata.zip
dumpuserinfo.xml
Inventor11101152546.dmp
Version: 150239000 AIP
This is for our college... students need to perform this action for their exam. We have had success using the same software and OS configuration, along with the same steps listed above, on different machines on campus. Not sure what is causing the error on these machines.
View 2 Replies
ADVERTISEMENT
May 24, 2012
Since I'm so darn clever I decided I could "save as" a 2009C3d-32bit drawing to 2011C3D-64bit. This drawing was working just peachy for a while. There are no data links. The drawing contained 2009 surface and point groups. I imported some Pipe styles created in 2011. Created 800' of profile,and my pipe network. When I was closing the drawing I got a lot of errors wanting to know if I wanted to save changes to VBA-pipes. Seemed like a good idea at the time so I said Yes. This morning I opened the drawing and it's there but the surface from 2009 no longer has it's Definition data. The point group is gone, breaklines are gone. I needed to remove one lousy bad point out of my surface. The points in the drawing now have three copies and one has the elevation in the point description and you can't fix it. The 3 labels are all tied together and if you erase one they all disappear. I am going to wing it from here and get this puppy out of the office with a little old fashioned autocad. This is my question. Should I have just started a new drawing in 2011, clipped all my old line work and text from the 2009, imported the points and rebuilt my surface? Did I do something wrong and there was some way I should have been able to make this work? I was running 2009 and 2011 on my computer but had to remove 2009 last week. It no longer like livng with his better looking brother "2011" and I had to put him out. I have numerous small projects created in 2009 so this will happen again.
View 5 Replies
View Related
Nov 5, 2013
Since updating a drawing last week and saving it in paper space, I can no longer get back into model space without the drawing crashing.
how I can get back into model space and do some work?
View 9 Replies
View Related
Sep 29, 2011
We have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
View 4 Replies
View Related
Jan 9, 2011
I am trying to install the student version of autodesk inventor 2011, and I'm using the default installation settings. The installation aborts when installing C++ and this is the message I get in the install log:
2011/1/9:17:36:18 Bobby Porwal NP-CHU === Setup started on NP-CHU by Bobby Porwal ===
2011/1/9:17:38:56 Bobby Porwal NP-CHU Install Microsoft Visual C++ 2008 SP1 Redistributable (x86) Failed Installation aborted, Result=1603
View 4 Replies
View Related
Jun 18, 2013
Do we have a size limit of the models using replace model reference?
Just done a little testing with some iam's
Anything larger that 500 parts and the drawing does nothing, no replace..
View 4 Replies
View Related
Feb 1, 2010
Is it possible to convert a .dwg file into a solid model using Inventor 2010?
I have attached a wireframe electric motor in .dwg format.
Inventor 2012
View 9 Replies
View Related
Nov 16, 2012
I have a frame generator model that won't update without crashing. I made a small change to the geom and can't get the model to update without a crash. No error message. I have restored (no vault) yesterdays version without success. Same crash. I have edited the geom to it's pre problem state. Same crash.
View 2 Replies
View Related
Dec 20, 2010
How on earth do you show the COG on a drawing in inventor 2011?
View 2 Replies
View Related
Nov 11, 2011
how to place a rendered image into an Inventor 2011 Drawing?
View 1 Replies
View Related
Sep 15, 2011
We are using Inventor 2011.
Inventor adds extra spaces to the parts list filenames when they wrap.
The space is added just before the break.
We access the parts list in several VBA programs. Mainly to get the line Item number.
With the Filename corrupted with random space characters I cannot tie the document to the item number in code.
Is there a way to get the true fully pathed document name from a parts list Line item instead of the flakey filename that is displayed?
View 1 Replies
View Related
Mar 17, 2013
I am running 2012 inventor ultimate and when I'm in assemblies quite often the screen goes blank and starts blinking or screen goes completely bright red. I have to force shut down and re-boot. I have discussed this with dell and they have replaced the video card, they have done patches updates etc. to no avail. My computer is an M6500 64 bit with a nividia graphics card running windows 7. very high end computer and very powerful. I am also using a 3D connexion mouse. I should also mention that the screen only blinks and crashes while undocked. While docked the only problem I have is locking up occasionally.
View 1 Replies
View Related
Mar 14, 2013
I have a autocad drawing that was clearly made from a 3D model. I cannot get the 3D file sent me. I was wonder how can I convert this drawing to a 3D file. Is anyway I can take the isometric view in the corner of the autocad drawing that i currently have and convert it to a 3D model.
View 2 Replies
View Related
Aug 19, 2011
where the drawing files from inventor that i save or export into dwg, dont have accurate dimensions, they are off.
View 5 Replies
View Related
Nov 30, 2012
I am trying to convert my AutoCAD inventor 2013 file to a standard 2007 file by going "Save As" "Save Copy As" and then "Autocad DWG File" but i keep getting up a message "problems encountered while saving the document" How do i repair this?
View 1 Replies
View Related
Dec 18, 2011
I'm having issues converting drawings in autoCAD 2011 for Mac to PDF using the regular methods.
View 1 Replies
View Related
Dec 2, 2013
This morning I got to work and attempted to modify an existing drawing file per some requested changes. I figured I would open the drawing file and move some of the things around that I needed but were going to disappear after I edited the model. The end result was to remove some small items from the model and add two other small items to the model. There was some annotation in the drawing connected to the parts I was removing that I wanted to stay in the drawing file so I was editing the drawing file first. This is what happened and what I have tried since:
1.) When I went to copy a weld symbol from one view and paste it in another IV crashed.
2.) I rebooted, attempted again, IV crashed.
3.) I rebooted, attempted to add a new weld symbol and delete the other (instead of copy/paste), IV crashed.
4.) I installed the windows updates my computer was telling me I needed to install (.NET 4.5.1).
5.) I rebooted, attempted again, IV crashed.
6.) I attempted to add a weld symbol to a different drawings in a different project, success.
7.) I attempted to add a weld symbol to a different drawing file in the same project, success.
8.) I attempted the original process again, IV crashed.
9.) I attempted to open the assembly file referenced by the drawing file, success.
10.) I attempted to open a drawing file that references the same model file as well as others in a larger assembly, success.
11.) I removed parts from the assembly file that were no longer needed in the design, success.
12.) I attempted to open the original problematic drawing file, IV crashed.
13.) I attempted to open it again, IV crashed.
14.) I used pack-n-go to consolidate all of the files to upload for my support request.
15.) I attempted to open the pack-n-go drawing file on my laptop.... IT OPENED.
Now, every time I attempt to open the original drawing file on my workstation, IV immediately crashes. When I open the PNG drawing file on my laptop it works. What should my next step be?
I am afraid to go any further because this drawing file is very much needed, and so large and complicated that I do not want to just create the file again (6 sheets detailing a large tank). I also don't want to start copying and pasting the file that does work on my laptop and screw something up with the files on my workstation. And of course, this tank is scheduled to start fabrication today.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
View 1 Replies
View Related
Feb 4, 2013
Any method for exporting an alignment as a shapefile in C3D 2011?
View 9 Replies
View Related
Jul 7, 2010
Never had this issue when running past versions of Autocad but every time i try and hatch using 'pick internal points' the program crashes. "FATAL ERROR - Out of memory - shutting down" message comes up every time. Hatching by selecting an object works fine but most of time this option is unusable.
2.66ghz
3.25gb ram
windows xp 32 bit
NVIDIA Quadro FX 570
View 8 Replies
View Related
Nov 30, 2011
I have parts that are similar and want to save a copy of the model and it's drawing together as a new part number. This way I don't have create a new drawing every time. I used ProE 2001 before I upgraded to Inventor 2012 and ProE would save them both together.
View 2 Replies
View Related
Nov 25, 2013
As this software continues to change it's behavior of function over nite. I am assuming due to new updates in inventor. I can no longer get my drawing to update per changes made to the model. This started about 2 weeks ago.
Change are completed perfectly, I open the drawing and it still has the old model represented. When I right on the view and open the model. Model contains all of my changes, but the drawing does not seem to care or notice that changes have been made and saved. I even closed inventor and reopened.
Even though I'm paid by the hour I really do not want to delete all views and start all over.
So the only answer is to delete all views replace them re dimension them and of course add any time consuming sketches.
10-15 minutes change now is going to take 3 hours. WHY can't autodesk make a stable piece of software?
View 9 Replies
View Related
May 3, 2013
how to identify the model associated with a particular PL on a drawing. I'm able to find a PL and write to the header which is cool. But I'm trying to determine the model associated with the BOM pipline so I can get it's P/N iproperty and write that to the PL header.
View 2 Replies
View Related
Feb 3, 2012
I created a number of 3D blocks to be inserted into a 3D model of a building. I created the blocks in a separate drawing first; i defined them locally, then, when i had them the way i wanted them, I used "wblock" to save all of these blocks to a folder.
I then opened the 3D building model and tried to insert one of my new blocks. I repeatedly get the following:
"AutoCAD Application has stopped working"
with the following info from microsoft:
"Description:
Stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: acad.exe
Application Version: 24.1.208.0
Application Timestamp: 4dbf9c16
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17651
Fault Module Timestamp: 4e21213c
Exception e053534f
Exception Offset: 000000000000cacd
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033"
I have tried repairing my installation of autocad with no improvement.
i tried opening the drawing of the block itself, copying it, and pasting it via the "copybase" command into the other drawing with the same result.
Occasionally, autocad will ask me if i'd like to debug the program (and visual studio opens) -- it mentions a "StackOverflowException" within acad.exe, and also mentioned "windowsbase.dll".
I am using windows 7 pro x64 and autocad 2011.
CPU: intel i7
Graphics: NVidia GeForce GTS 250
8GB DDR3 ram
The autocad error-reporting dialog never gets launched as it is forced to close before this point.
View 3 Replies
View Related
Jun 14, 2013
Someone in the office is running AutoCAD 2011 (Windows 7) and the program keeps closing itself just saying fatal error. It seems to happen when a command is entered, particularly while editing text which seems to close it every time. It's not limited to editing text though. It happens on multiple files as well. I've read there were some issues with 2010 closing while editing text but I can't seem to find anything about 2011 having problems with it. She restarted her computer and it seems to be working now, but this has happened in the past and the problem will come back.
View 1 Replies
View Related
Nov 26, 2013
I am making a control console with a bunch of plastic tags on my pilot devices. I use the sketch text tool to write the label on each tags.
When comes the time to make my drawing, I get my model sketch and they show on my 2D, no problem.
Well today, it seems Inventor 2014 just gave up on giving me my sketches. Here is the console view of of the lid with the tag texts showing:
Now let's go over the second lid on the same plan and get my model sketch to see the rest of my text.
Click on it and ....
Nothing! still no text.
Windows 7 Ultimate 64-bit SP1
Intel Core i7-4930MX CPU @ 3.00GHz
32.0GB Dual-Channel DDR3 @1600MHz
NVIDIA GeForce GTX 780M 4GB Ram
240GB SSD/500GB HDD
Autodesk Product Design Suite Premium 2014
View 6 Replies
View Related
Nov 8, 2012
Inventor Pro 2012
After creating the desired frame using frame generator, I am creating a detail drawing. When I insert the parts list, the info applied is using the full length of the tubes before it was cut to fit. (to get rid of the over lap edges of the frame)
Attached is the part file used to create the frame. (Can't attached the frame, too big) I used
Also attached is the drawing to clarify the issue.
Total length of the frame is 116.75"
In reality is it made up of 2 short end pieces 23.375" + 2 x for pocket tubes (10") plus the center tube 50"
23.375+23.375+10+10+50=116.75"
Now from my part file, i just made 3 lines for the total length and 2 intersecting lines for the fork pockets. The parts list is using the initial creation length and not the altered cut length? Does this make any sense?
How can I get the parts list to represent values after a cut is done to the tube?
View 4 Replies
View Related
Jul 30, 2009
Apparently I can't edit model dimensions from a drawing because i did not select this option when i installed inventor 2010.
View 9 Replies
View Related
Nov 29, 2012
Is there a way to have a part, which is a part of a larger assembly, get the title, subject, etc. from its parent assembly? I have my template set to use the "Title" property in my title block but I'd like each individual part drawing to pull that "title" from the assembly, not from the part itself.
View 6 Replies
View Related
Sep 10, 2012
I have a part (partA) and a drawing of it (drawingA).I want to save a copy of both (partB and drawingB) and make changes to partB and drawingB will update.
To do this do I save a copy of partA first to partB and then in drawingA replace part to partB and then save a copy of drawing to drawingB
View 1 Replies
View Related
Apr 9, 2012
How can i create an isometric drawing from pipe model.
View 9 Replies
View Related
Dec 26, 2013
I did some digging and found the option to replace a model reference in an entire drawing, but I'm looking to change the reference in just a view. Consider the picture I have attached. I'm depicting top down views of these layers. Each layer requires changing the view identifier each time I drop a view. This would be considerably less time consuming if I could just copy/paste the view and change which part file it was pointing to.
View 2 Replies
View Related
