AutoCAD Architecture :: 2009 AEC Imperial Files Missing?
Apr 10, 2013
I have Architecture 2009 on both my PC and laptop. The laptop version is functioning properly but the PC version started having problems a few weeks ago. On my PC when I open up the Design Center / Autocad Architecture / AEC Content there should be icons for both the AEC Imperial and AEC Metric folders - there are no folders
I design / draw in Imperial and currently have no access to the AEC Design and
AEC Documentation files. Is it possible to restore or reactivate the AEC files without a complete uninstall/reinstall of the software?
View 1 Replies
ADVERTISEMENT
Aug 13, 2008
my OS is Vista 64bit. i was using ACA2008 SP1 without any problems about a year.i decided to uninstall it and start using ACA2009.i have uninstalled ACA2008, 3dsmax2008 and other autodesk apps and removed some folders 'autodesk' and 'autodesk shared' from vista system folders.i also delete 'autodesk' from registry (LocalMachine/Software & CurrentUser/Software).then i installed ACA2009 64bit without any problems. after install i start it and there wasn't any problems (but i do not use any AEC objects, so i don't know if they was working).next i installed 3dsmax2009 & sp1 for it. max worked OK.then i installed sp1 for ACA2009. instalation was OK... but when i start working on a project i realised that AEC objects (wall,door, etc.) dont work at all ACA2009 starts OK without any warning or something...it loads at startup AECarchBase (and other AEC related stuff) but when you are trying to use any of wall,door,window it does do nothing... for example when you select wall from tools pallete it shows command 'WallAdd' in command line and then wall command ends without any warning or something...it also doesn't work from command line or menu the strange thing is when i uninstall ACA2009 and install ACA2008 again problem was also now in ACA2008 !!!
View 9 Replies
View Related
Jan 11, 2012
I have been working on a drawing for a client in the Metric template, everything displayed in metric, measures in metric, etc. Then this morning when I opened the file, the measurements have switched to imperial. The profile is still the metric one, and when I enter a value for a line length it is clearly using metric because it goes where I expect it to go, however the numbers displayed onscreen are in imperial. Is there an easy way to get this to switch back to displaying in Imperial?
View 1 Replies
View Related
May 24, 2011
Reviewing the ACA 2011 Curriculum for next year, I notice that Units 1 and 2 .dwg files are missing for the first two units. Is there a link to download the missing files?
View 3 Replies
View Related
Jun 4, 2013
Is it possible to convert a pdf file created in Autocad back to it's original dwg format in Autocad?
View 2 Replies
View Related
Aug 13, 2012
I work with a national company that creates criteria drawings for new projects. They recently changed to the 2012 version but they save it down to 2007. There has not been an issue with opening files with my 2009 version until recently. All of the computers in our office are unable to open these new files, although they claim nothing has changed. My CAD will pop up a fatal error and shut down whenever I attempt to open the new files. I downloaded the 2013 trial version and saved the file down to the older version, but that does not work either. Newer versions do not seem to be affected by the files, just my 2009 version. I tried creating a new file in 2013 and saved down to 2007 format. When I try to open it 2009 there is no issue. besides purchasing a new version of AutoCAD?
View 1 Replies
View Related
Aug 30, 2012
We've just started using ACA 2012 and have noticed when importing files created in ACA 2009 that structural members do not display properly. We use the structural column or beam to represent a rainwater or soil pipe and are expecting to see a cut through at the cut plane and nothing else however we are getting a couple of lines that represent the crank in the pipe and I cannot turn them off. I'm sure that a setting has been introduced somewhere however after two weeks of looking I am still in the dark.
I've attached a file created in ACA 2009 that displays the problem in ACA 2012
View 7 Replies
View Related
Mar 22, 2011
I'm currently going over the Metric tutorial for ACA 2009. At some point, I'm instructed to right-click the tool palette title bar to select the "project-specific" palette (which should be located among the Design, Visalization, etc palettes). Well, this palette is not there.
I´ve checked the project properties and verified that Project Tool Palette Group is set to Shared workspace catalog. The paths are correct (I'm using Windows 7 x64), etc. When I open antoher tutorial project (Steel Framed Residence_m) the project tool palette is there, but when I create any new project or use the one in the tut, this group/palette is not created.
The profile used to create the project is the default:
C:ProgramDataAutodeskACD-A 2009enuTemplateTemplate Project (Metric)Template Project (Metric).apj
View 1 Replies
View Related
Sep 30, 2009
I noticed that icons existing in ACA 2009's Object Snap Settings Dialog Box disappeared!
View 9 Replies
View Related
Jan 23, 2014
I just spent a bunch of hours creating custom line types using imperial measurements which is the format we use most often with our drawings. Once in awhile we do work in metric and I am wondering if I need to redo the entire line type .lin file using metric values.
View 3 Replies
View Related
Oct 29, 2011
can you open inventor pro 2012 files on inventor pro 2009?
View 2 Replies
View Related
Dec 22, 2011
.My Inventor2009 keep crashing everytime i'm trying to traslate/import Mech. Desktop2009 files....Windows7 is my os platform. Done all latest SP both for Inventor & Mech Desktop.
View 1 Replies
View Related
Sep 23, 2013
how to import Mechanical Desktop 2009 files into Inventor 2012
View 1 Replies
View Related
Jul 12, 2012
To convert from imperial to metric multiply the length, in inches, by 25.4 (the number of millimeters per inch).
Example: 3 inches converted to millimeters is 3*25.4 or 76.2mm.
To convert from metric to imperial multiply the length, in millimeters, by 0.03937 (the number of inches in a millimeter). For greater accuracy use 0.03937008.
Example: 100 millimeters converted to inches is 100*0.03937 or 3.937 inches.
View 7 Replies
View Related
Jun 11, 2012
We just upgrade ACA 2011 to ACA 2013 and our ctb is missing.
How/Where can we get our ctb and place them for ACA 2013?
View 2 Replies
View Related
Sep 19, 2011
AA 2012 - The REFEDIT window is missing, which means I cannot add a subtract objects while editing a block, I can save and close the block by Right Clicking menu, but the window is nowhere to be found!
Do I need to modify the CUI?
View 7 Replies
View Related
Jun 13, 2011
In AutoCAD Architecture 2011, some of the tabs are missing. One is the Insert tab. So I can not insert an xref.
how to regenerate the ribbon...if that is what I need to do.
View 2 Replies
View Related
Feb 6, 2012
My AutoCAD Architecture 2011 program is missing the button to export to an earlier version of AutoCAD. I have seen this button on other computers at our office. I need to export some drawings to earlier versions without having to bind exrefs and do a 'save as' earlier version.
How I can get this button back? Does it have anything to do with DWG Trueview?Here are two screen shots, one with the button, and one without.
View 2 Replies
View Related
Jun 8, 2011
After upgrading ACA2012 to Autodesk Building Design Suite (which still includes ACA20012)
The grips on images to resize them to a rectangle for example no longer appear.
The grips still appear on other entities such as lines, circles and rectangle still appear.
Driving me potty as it still works on the systems where this upgrade hasn’t been applied yet.
It’s not drawing specific as this happens on all previous drawings opened on the upgraded machines, but not on the none upgraded.
Using the scale function to reference points at the moment as a very much longer work around, but would like it back the way it was.
View 2 Replies
View Related
Jul 3, 2012
I am using ADT 2013, and I had my drawings printing fine, and was able to override layer colors and plot some xref's such as the floor plan ghosted so the electrical plan would show up better. Now it says that Full Saturation is missing. I can override the vp color in the layer properties manager, but when I go to plot preview the layer still remains colored.
View 4 Replies
View Related
Oct 6, 2013
AutoCAD Architecture 2014 (Student License) The SET LOCATION panel is missing on the INSERT tab.
View 1 Replies
View Related
Apr 27, 2012
It appears to be an error with swing lines for double doors when an elevation or section view from an AEC model is generated. Only one out of the two door leafs shows swing lines in any event. Could this be a legacy error after the hotfix re: hidden line projection error on elevations and sections? I applied the AecCore.crx fix yesterday and then became aware of the problem with the swing lines.
View 2 Replies
View Related
Apr 13, 2012
I'm starting to set up Sheets from our template but none of the construct is transfering except for dimension lines. The views are drug in from Project Navigator. Elevations are fine, but when the viewport window is made larger the construct isn't there. I've attached an example of what is supposed to be the floor plan.
I've edited the walls but that made no difference. They are set to start at 0". Is there anything I haven't checked? I'm supposed to go to contract with these drawings next week.
View 4 Replies
View Related
Jan 22, 2013
when I double click on a text, a text formatting dialog box use to appear, but now it does not.
View 2 Replies
View Related
Jun 8, 2011
I'm working with Architecture 2011 and when I draw a 2D section, the defining line is missing for the structural members cut by the section. The hatching displays fine but the line around the material isn't there.
Under the material definitions I've got the 2d section / elevation linework turned on and under the elevation style I've got the defining line turned on and set to by material.
The defining line will come on if I turn on the inner and outer shrinkwrap but then it's color is defined either by layer or by color in which case it's all the same color and i have to manually edit the linework to change the color.
View 1 Replies
View Related
Apr 26, 2013
I used architecture on my pc. I installed Autocad on another pc with the same Serial code. I can see on the top that my version suddenly is a Educational version. I'm telling you this because i don't know if this is the reason of my problem.
The problem: i can't see the properties of an object when i use autocad architecture in the educational version.
For example: I make a wall and i place a window in the wall. Now i want to change the width of my window, using the properties bar. SO i click on my window (right mouse button) and click on PROPERTIES. It opens the properties bar BUT i can't see the window and his properties. At the top of the properties bar it says "No selection".. How can this be when i begin with the right mouse click on my window?
When i do it in the other direction: Open properties (ctrl+1) first and then select for example my wall, still nothing changes in the properties bar!
View 4 Replies
View Related
Dec 21, 2011
Trying to setup my machine at home to match my machine at work. To clear things up, I'm running ACA 2009 on both machines, both are running XP Professional, although I'm running XP Professional at home through VMWare Fusion 4 on my MacBook Pro and I really doubt that could cause these issues since a coworker is having these issues at work on a PC.
First of all when I startup ACA 2009 almost everything is missing! When I go to profiles and load the imperial profile I get the wonderful ribbon, which I immediately use RIBBONCLOSE to turn off but then I don't have any file menus. I have the large A in the upper left corner but it only has File, Edit, and Exit I believe. So I used MENULOAD to get the ACAD.cui back up and then reinserted the install CD to add EXPRESSTOOLS back (...why aren't this included to start....that's for another time).
So now I have a something pretty close to my work machine after moving some properties, xref, and tool palettes around. I don't really use any buttons so it is a pretty minimalist desktop. Now down to the real question...
Where did the Project Browser and Style Managers disappear to? I know, I know, ending in a preposition...I can't think anymore today and Autodesk you are responsible. Is it just me or does Autodesk seem to be hiding more and more from us with each release every year? I can type ProjectBrowser into the command line and it will appear but it isn't under the File menu and more and I honestly couldn't find the Style Manager command prompt so I can't tell you if that works.
How do I get these two items to reappear, neither of the two buttons existing either in the standard ACAD.cui configuration next to Tool Palette, etc
Also, why don't the profiles work anymore? If I save it under profiles and reload it the next time everything is messed up nothing happens, and yes the shortcut I use to start ACA references that profile.
View 5 Replies
View Related
Apr 26, 2012
Am just starting to explore Revit and was trying to add some lights to my building to play with some renders. When I try and load anything from within the 'lighting fixtures' however, I am met with the message:
"There is no tag loaded for lighting fixtures, do you want to load one now?"
I have explored a number of other family types, walls, doors, windows, kitchen and bathroom etc and never had this message/error occur.
View 2 Replies
View Related
May 24, 2012
Working with an excel spreadsheet and following ACA. Looking for datalink dialog box.
Ribbon: Insert tab>Linking & Extraction panel>data link.
Problem is that the Linking & Extraction panel is not available.
ACA2011
Win7 64
View 1 Replies
View Related
Aug 22, 2013
How can I restore my object properties dialog box in its default state? I'm recently working on a project when my Autocad Architecture 2013 just stopped working while it was saving. When i re-opened the file, I just noticed that the object properties doesn't show the full parameters of a certain object anymore. The width,height and other parameters in adding a wall is not included in the properties dialog box. Same scenario goes for all the objects, when i click on a dimension line or any line, an incomplete dialog box appears. Solutions that i've tried but nothing worked:
1. Changed User Profle Preferences
2. Changed my .CUIX in the customization file
3. Restart Autocad
4. Reset Autocad
5. Reinstalled Autocad
6. Downloaded and Installed Autocad Architecture 2013 service packs 1&2
I'm Using Autocad Architecture 2013 64 bit and OS windows 8 64 bit.
View 3 Replies
View Related
Oct 1, 2013
My annotation visibility button seems to be missing from the Drawing Status area (down in the lower right corner) when I am in model space. How do I get it back?
View 1 Replies
View Related
